본 논문에서는 신소재 $Rb_2LiCeCl_6$ 할라이드 섬광체를 개발하고, 개발된 섬광체의 섬광 및 열형광 특성에 대하여 조사하였다. $Rb_2LiCeCl_6$의 섬광스펙트럼은 $Ce^{3+}$ 이온의 4f ${\rightarrow}$ 5d 천이에 따라 파장범위가 350~410 nm, 피이크 파장은 368 nm 및 378 nm이었다. 섬광감쇠시간 특성은 71 ns의 빠른 시간 특성 성분(85%)과 405 ns의 느린 성분(15%)의 2개로 구성되며, 잔광에 기여한 포획준위의 물리적 변수를 열형광 측정법에서 분석한 결과, 포획 준위의 활성화에너지, 발광차수 및 주파수 인자의 평균값은 각각 0.75 eV, 1.48 및 $3.0{\times}10^8s^{-1}$이었다.
The analytical performance of glow discharge mass spectrometer (GD-MS), using a flat type ion source is discussed. The efficiency of ion extraction was maximized at the distance between anode and cathode of 6 mm. At the operation condition of 4 mA, -1000 volt, and 1 mbar for the source, the optimum voltages for sampler and skimmer were40 volt and -280 volt, respectively. The intensities of Cu, Zn, and Mn were increased as a function of square root of current approximately. Korea standard reference materials (KSRM) were tested for an application study. The detection limits of most elements were obtained in the range of several ppm at the optimized operating condition. The peaks of aluminum and chromium were interfered by those of residual gases. The depth profile of nickel coated copper specimens (3, 5, 10 ${\mu}m$ thickness) were obtained by plotting time versus intensities of Ni and Cr after checking the thickness of nickel coated using a scanning electron microscope (SEM). At this moment, the sputtering rate of 0.2 ${\mu}m/min$ at the optimum operating condition was determined from the slope of the plot of time to the coating thickness. The roughness spectra of specimen's crater after 16 min, discharge were obtained using a Talysuf5m-120 roughness tester as well.
침출차와 소스류, 전분류의 각 품목에 대하여 PSL과 TL의 적용 가능성을 검토하기 위하여 각 품목별로 다른 선량으로 방사선 조사를 실시하여 PSL과 TL 분석을 하였다. 침출차 2종은 0, 2, 7kGy, 소스류 2종은 0, 5, 7, 10 kGy, 전분류 3종은 0, 2, 5 kGy로 조사를 실시하였다. PSL의 분석 결과, 침출차는 비조사구에서는 threshold value $T_1$(700) 이하의 낮은 값을 나타내었고 2kGy 이상의 조사구에서는 $T_2$(5000) 이상의 높은 값을 나타내어 방사선 조사 여부 확인이 가능하였다. 이에 비해 소스류는 비조사구에서는 $T_1$ 이하의 값이 나타났지만, 5kGy 이상의 조사구에서 1173, 1773의 $T_1$보다 높고 $T_2$보다 낮은 photon count를 나타내어 중간시료로 나타났다. 또한 전분류에서는 비조사구에서 $T_1$보다 높고 $T_2$보다 낮은 중간값을 나타내어 TL 확인 시험을 필요로 하였다. TL 분석에서는 3가지 품목 모두 비조사구에서는 $300^{\circ}C$ 부근에서 최고의 peak를 가지는 glow curve를 나타내거나 특정적인 TL glow curve를 나타내지 않았다. 그리고 조사구에서는 $150{\sim}250^{\circ}C$ 부근에서 비조사구에서 보이지 않았던 특유의 glow curve를 나타내었고, 조사선량에 따른 intensity의 차이도 보이고 있었다 한편 TL 결과를 검증하기 위하여 재조사에 의한 TL ratio를 산출한 결과 비조사구에서는 0.08 이하를 나타내었으나, 각 선량별 조사구에서는 전분류의 경우 0.07 이상의 낮은 값을 나타내기도 하였으나 TL온도범 위와 glow curve의 형태에 따라서 방사선 조사된 것을 확인할 수 있었다. 따라서 PSL과 TL 분석법의 적용 가능성이 확인되었다.
Cr, Cu, Fe 등을 고의적으로 첨가한 MgO 단결정에 자외선 및 X선을 조사하여 여기하고 액체질소온도로부터 500K까지의 범위에서 열자극 발광 그로우곡선과 발광 스펙트럼을 측정 분석하였다. 이 시료에서 얻어진 TSL 그로우곡선은 136.5K, 223.5K, 360K, 390K, 440K, 5개의 봉우리가 얻어졌다. 그들 봉우리의 활성화 에너지 값은 각각 0.27eV와 0.63eV, 1.08eV, 1.19eV, 1.33eV이었다. 우리는 200nm에서 650nm의 파장 범위 내에서 MgO 단결정의 TSL 스펙트럼을 측정하였다. 이 TSL 스펙트럼 측정으로부터 얻어진 345nm, 375nm, 410nm 파장에서 봉우리를 가진 스펙트럼을 분석하였으며, 이들의 발광 기구를 기술하였다. MgO:Cr, MgO:Cu, and MgO:Fe에서 방출된 TSL 스펙트럼의 봉우리는 346nm, 360nm, 375nm의 파장에서 나타났다.
전극 양단에 안정 콘덴서(Ballast Contenser)를 부착한 냉음극 형광램프와 외관전극의 용량성 결합으로 동작되는 외부전극 형광램프의 전류-전압 방전특성을 조사하였다. 냉음극 형광램프의 전극 양단에 인가되는 전압과 전류의 특성은 전압의 증가로 암전류 영역과 타운젠트 점화방전을 거처서 음극 강하를 통한 전형적인 글로우 방전을 보여준다. 안정 콘덴서에 인가되는 전압을 포함한 전류-전압은 안정 콘덴서에 인가되는 전압이 상대적으로 크기 때문에 냉음극 강하가 나타나지 않고, 글로우 방전 영역에서 전압의 증가에 따라서 전류가 증가한다. 외부전극 자체가 캐패시터인 외부전극 형광램프에서의 전류-전압은 안정 콘덴서를 포함한 냉음극 형광램프와 동일한 특성을 보여준다. 따라서 외부전극 형광램프는 동작 전압에서 글로우 방전의 특성을 갖으며, 외부전극 자체가 안정 콘덴서의 기능을 한다.
방사선 조사(1~4 kGy)와 저장 기간(4$^{\circ}C$, 6개월)에 따른 건조과일의 TL 및 ESR검지 특성과 관능적 품질을 평가하였다. 건포도에서 분리된 mineral의 TL측정에서 비조사구는 200~30$0^{\circ}C$ 부근에서 매우 낮은 intensity의 glow curve(TLI)를 나타내었으나, 1 kGy 이상의 조사구에서는 특유의 peak가 18$0^{\circ}C$ 부근에서 나타나면서 선량 의존적으로 intensity가 증가되었다($R^2$=0.9684). 이로써 방사선 조사구와 비조사구의 판별이 6개월 동안 가능하였다. 또한 재조사(1 kG)에 의해 측정된 TL$_2$signal을 활용하여 TL ratio(TL$_1$/TL$_2$)를 계산하였을 때 검지결과의 신뢰도를 높일 수 있었다. 건 바나나의 ESR 측정에서 1 kGy 이상의 조사 시료는 crystalline sugar radical 유래의 전형적인 multicomponent line을 보여 주어 조사 여부의 판별이 가능하였고 signal의 강도는 선량 의존적($R^2$= 0.8977)으로 6개월 동안 비교적 안정하였다. 방사선 조사된 건조과일은 6개월까지 상품성이 잘 유지되었으므로 TL 및 ESR 분석은 건포도와 건 바나나의 검지 관리에 적합한 방법임이 확인되었다.
본 연구는 프리지아 '이본느'를 가지고 매일 오후 5시에서 8시까지 150일 동안 LED(청색, 녹색, 적색, 청색:녹색:적색 혼합)광과 백열등, 메탈할라이드등으로 보광을 함으로써, 꽃눈분화 이후부터 개화가 완전히 종료될 때까지 광질에 따른 장일처리가 프리지아의 생육 및 개화에 미치는 영향을 알아보기 위하여 수행되었다. 엽분열기부터 화뢰형성기까지 초장은 광원별 장일처리에 의해 큰 변화는 없었고 엽수는 메탈할라이드등 처리에서 감소하는 경향이었으나 화뢰 발달기 때 엽 내 엽록소 함량은 메탈할라이드등에서 가장 높았다. LED 청색광과 녹색광에서 개화기가 빨랐는데 특히 녹색광 처리에서 가장 빨라 무처리와 메탈할라이드등에 비해 6-8일 정도 단축되었다. 포장 내 개화기간은 LED 적색광에서 가장 짧아 일시 수확에는 효과적이었다. 메탈할라이드 등에서 절화중, 소화의 길이와 폭 등 절화특성이 우수하였다. 구근의 특성을 조사한 결과 LED 적색광에서는 구폭과 구중이, 백열등 처리에서는 구고와 구중이 감소하였고, 구근 내 전분함량은 모든 시험구 사이에 특별한 차이가 없었다. 결과적으로 개화촉진은 LED 녹색등에서 효과적이었고 개화품질은 메탈할라이드등 처리에서 우수하였다.
교역량이 증가되고 있는 수입 오렌지를 대상으로 radiation induced marker검색을 위하여, 방사선 조사시 예상되는 생물학적, 물리적 변화에 기초한 DNA comet assay, 열발광 (TL) 및 전자스핀공명 (ESR) 분석을 실시하였다. DNA comet assay 결과, 오렌지의 씨 및 과육의 cell은 감마선 조사와 무관하게 긴 tail을 가진 comet 모양으로 관찰되었으며, 저온 저장 6주까지도 유사한 경향이 유지되어 marker로의 활용 가능성이 낮았다. TL 측정 에서 비조사 시료는 약 200~30$0^{\circ}C$ 부근에서 매우 낮은 intensity의 glow curve를 나타내었고, 0.5 kGy 이상의 조사 시료에서는 조사 시료 특유의 peak가 18$0^{\circ}C$ 부근에서 나타났으며, 조사 선량의 증가에 따라 intensity 도 점차 증가하였다 TL 측정은 저장 6주까지도 가능하였고, TL ratio(TL$_1$/TL$_2$)의 산출은 검지 결과의 신뢰도를 높여주었다. ESR 측정에서는 시료의 씨, 과육 및 과피 부위에서 방사선 조사 유래의 특이적인 signal이 나타나지 않아 조사 시료와 비조사 시료의 구분이 불가능하였다. 이상의 결과에서 볼때 오렌지는 TL 분석에 의해 방사선 조사 여부의 확인이 가능하며 이 방법은 오렌지의 저온 상품성이 유지되는 저장6주 이후에도 적용이 가능한 것으로 나타났다.
Effects of magnesium and pH on corrosion of aluminum galvanically coupled to iron have studied by using potentio- dynamic and static tests for polarization curves, Mott-Schottky test for analysis of semiconductor property, and GD-AES and XPS for film analysis. Pitting potential was sensitive to magnesium as an alloying element but not to pH, while passive current was sensitive to pH but not to magnesium. It was explained with, instead of point defect model (PDM), surface charge model describing that the ingression of chloride depends on the state of surface charge and passive film at film/solution interface is affected by pH. In addition, galvanic current of aluminum electrically coupled to iron was not affected by magnesium in pH 8.4, 0.2M citrate solution but was increased by magnesium at the solution of pH 9.1. The galvanic current at pH 9.1 increased with time at the initial stage and after the exposure of about 200 minute, decreased and stabilized. The behavior of the galvanic current was related with the concentration of magnesium at the surface. It agreed with the depletion of magnesium at the oxide surface by using glow discharge atomic emission spectroscopy (GD-AES). In addition, pitting potential of pure aluminum was reduced in neutral pH solution where chloride ion maybe are competitively adsorbed on pure aluminum. It was confirmed by the exponential decrease of pitting potential with log of [$Cl^-$] around 0.025 M of [$Cl^-$] and linear decrease of the pitting potential. From the above results, unlike magnesium, alloying elements with higher electron negativity, lowering isoelectric point (ISE), are recommended to be added to improve pitting corrosion resistance of aluminum and its alloys in neutral solutions as well as their galvanic corrosion resistance in weakly basic solutions.
The distinguishing characteristic of the glow discharge is that chemical reaction induced by partially ionized gases are limited only to the substrate surface. Most studies have been done on the plasma etching and polymerization. The graft polymerization in vapour phase by cold plasma has been rarely investigated. In this study the system of tub3ar reaction chamber with capacitively coupled electrode of alternative current of 60 Hz was employed for the graft polymerization. The graft polymerization of Acylic Acid(AA) onto the poly (ethylene terephthalate) (PET) was carried out by treatment of PET film and fabric by cold plasma (glow discharge of argon gas), followed by the supply of AA vapour. The graft yield was about 1 wt%. The surface property was determined by contact angle, the surface tension was evaluated by zisman’s plot and equation of surface tension mesurement. The results were as follows: 1. In order to obtain lower contact angle, it was effective to avoid the vicinity of electrodes for a setting position of substrate. 2. Contact angle affected on the monomer pressure and its duration of exposure to the acid vapour. 3. Polymer radical formation was influenced by the changes of the value of current density and plasma treatment time. 4. Total surface tension of plasma grafted PET film increased. With an increase in the carboxylic acid content, the dispersion force decreased, while, the polar force and hydrogen bonding force increased. 5. The contact angle decreased from $75^\circ$ to around $30^\circ$ by plasma grafting. There was no ageing effect on the contact angle after 4 months.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.