• 한국안전학회지
• /
• 제30권3호
• /
• pp.38-44
• /
• 2015

For this study, fire tests were performed targeting household items (Sofa, Drawer, Refrigerator, Washing machine) using a large cone calorimeter (Large Scale Cone Calorimeter, LSC). The data were obtained focusing on the fire characteristic of the data when the actual fire occurs. The study results showed the following mean HRR of the household items; drawer 2843 KW, sofa 2939 KW, washing machine 719 KW, refrigerator 2907 KW, and THR is found in sofa 2202 MJ, drawer 1559 MJ, refrigerator 1193 MJ, washing machine 627 MJ. From the result, it could be found that the sofa can cause significant heat generation when the fire occurs, and the flashover tendency was found relatively high in compartment fire. In addition, a weight of the four our household items was reduced sharply in a similar time (20min before and after) degree after ignition. The drawer and sofa which has a high heat release can be considered to speed up the fire spread as their weight decrease rapidly and showed relatively weak to the fire compared to the refrigerator and washing machine.

• Journal of Microbiology and Biotechnology
• /
• 제14권6호
• /
• pp.1318-1323
• /
• 2004

This study describes the purification and characterization of a novel antihypertensive angiotensin 1­converting enzyme (ACE) inhibitory peptide from Saccharomyces cerevisiae. Maximal production of the ACE inhibitor from Saccharomyces cerevisiae was obtained from 24 h of cultivation at $30^{\circ}C$ and its ACE inhibitory activity was increased by about 1.5 times after treatment of the cell-free extract with pepsin. After the purification of ACE inhibitory peptides with ultrafiltration, Sephadex G-25 column chromatography, and reverse-phase HPLC, an active fraction with an $IC_{50}$ of 0.07 mg and $3.5\%$ yield was obtained. The purified peptide was a novel decapeptide, showing very low similarity to other ACE inhibitory peptide sequences, and its amino acid sequence was Tyr-Asp-Gly-Gly-Val-Phe-Arg-Val-Tyr-Thr. The purified inhibitor competitively inhibited ACE and also showed a clear antihypertensive effect in spontaneously hypertensive rats (SHR) at a dosage of 1 mg/kg body weight.

• 한국임상수의학회지
• /
• 제34권6호
• /
• pp.463-466
• /
• 2017

A 3-year-old, 26 kg, castrated male Chow Chow was presented for assessment of weight-bearing lameness of the left hind limb. The patient had a history of triple pelvic osteotomy on the left side to correct hip dysplasia 2 years prior to his presentation of clinical signs and underwent total hip replacement on the right coxofemoral joint 1 year later. Upon physical examination, pain and crepitus were noted on the left hip joint during extension. Radiological examination revealed coxofemoral joint subluxation and moderate degenerative bone changes on the left hip joint and pelvic axis, which relates to acetabular angles that were changed after triple pelvic osteotomy (TPO). Preoperative computed tomography was used for 3-dimensional printing to establish an accurate surgical plan. The changed angles of the acetabulum after TPO were evaluated, and rehearsal surgery was performed using a 3-demensional printing bone model. Three months after the THR surgery, the function of the affected limb had improved, with no lameness. Complications, such as luxation and implant failure, were not observed until 6 months after the operation. Accurate evaluation of acetabulum angles and rehearsal surgery using a 3D-printed bone model is effective for total hip replacement after unsuccessful TPO.

• Journal of the Korean Wood Science and Technology
• /
• 제44권5호
• /
• pp.785-808
• /
• 2016

단기간의 인공열화와 옥외폭로의 두 시험조건에 따라 나타나는 목조문화재용 방염제 성능 차이를 비교하여 인공열화시험에 대한 신뢰성을 평가하고자 하였다. 주사전자현미경 분석결과, 목재 표면에 방염제의 용융으로 인해 생성된 탄화물이 층을 형성함으로써 연소를 지연시키는 작용이 일어나는 것을 확인하였다. 2주간의 인공열화 및 6개월간의 옥외폭로 시험처리를 마친 방염처리 된 단청시편에 대해 열방출률(HRR) 및 총열방출량(THR)을 측정한 결과, 열화 전 후의 방염 성능의 변화가 거의 나타나지 않았다. 실험결과 6개월간의 옥외폭로 시편과 2주간의 인공열화(6개월의 옥외폭로에 해당한다고 추정한 조건) 시편에서 근사한 연소실험 결과 값을 얻을 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권10호
• /
• pp.1459-1464
• /
• 2004

The purpose of this research was to investigate the potential use of cheese whey protein (CWP), a cheese by-product. The physiological activity of calcium-binding peptides in CWP may be used as a food additive that prevents bone disorders. This research also examined the characteristics of calcium-binding peptides. After the CWP was heat treated, it was hydrolyzed by trypsin. Then calcium-binding peptides were separated and purified by ion-exchange chromatography and reverse phase HPLC, respectively. To examine the characteristics of the purified calcium-binding peptides, amino acid composition and amino acid sequence were analyzed. Calcium-binding peptides with a small molecular weight of about 1.4 to 3.4 kDa were identified in the fraction that was flowed out from 0.25 M NaCl step gradient by ion-exchange chromatography of tryptic hydrolysates. The results of the amino acid analysis revealed that glutamic acid in a calcium-binding site took up most part of the amino acids including a quantity of proline, leucine and lysine. The amino acid sequence of calcium-binding peptides showed Phe-Leu-Asp-Asp-Asp-Leu-Thr-Asp and Ile-Leu-Asp-Lys from $\alpha$-LA and Ile-Pro-Ala-Val-Phe-Lys and Val-Tyr-Val-Glu-Glu-Leu-Lys from ${\beta}$-LG.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2777-2785
• /
• 2000

In cementless total hip replacement(THR), an initial stability of the femoral component is important to long term fixation of femoral stem. The intial stability has close relationship with the relative displacement of prosthessis and sponge bone at the proximal of femur. After implantation of the proshesis, the surrounding bone is partially shielded from load carrying and starts to resorb. Stress shielding is the cause of the loss of proximal bone. Assessing stress distribution of femur is important to predict stress shielding. The initial stability and the stress shielding were investigated for two loading conditions approximating a single leg stance and a stair climbing. Three types of stems were studied by the finite element method to analyze the biomechanical effects of distal filling of cementless femoral stems. Three types of stems empolyed are a distal filling stem, a distal flexible stem, and a distal tapered stem.

• Journal of Chest Surgery
• /
• 제25권6호
• /
• pp.630-636
• /
• 1992

From August 1990 through December 1991, 14 patients[all males] underwent int-rathoracic muscle transposition of extrathoracic skeletal muscles to treat empyemas, 6 patients had tuberculous empyemas, 4 had chronic empyemas of unknown etiology, 3 had pos-tpneumonectomy empyemas, and 1 had postlobectomy empyema. 9 patients had associated bronchopleural fistulas, Their ages ranged from 22 to 67 years, with mean age of 45.1$\pm$17. 6[$\pm$S.D] years. The serratus anterior was transposed in 13 patients, the latissimus dorsi in 12. In 11 patients, both the serratus anterior and the latissimus dorsi were transposed. The omental flap also transposed in 3 patients. To reduce the dead space in the thoracic cavity, thr-oacoplasty was also carried out in 10 patients. The number of the partially resected ribs was 3.0$\pm$0.8[$\pm$S.D.]. All operations were single stage procedures, and all wounds were closed primarily, with no permanent tubes or chest wall openings. There was no hospital mortality, and so no subsequent operation has been required. Follow-up of the patients ranged from 5 to 16 months with a mean of 9.2$\pm$3.1[$\pm$S.D] months, All the patints had no further signs or symptoms of the original infection after discharge. We conclude that intrathoracic transposition of extrathoracic skeletal muscle is an excellent method of treatment for persistent, life-threatening intrathoracic infections.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.387-392
• /
• 2000

In cementless total hip replacement(THR), an initial stability of the femoral component is important to long term fixation of femoral stem. The initial stability has close relationship with the relative displacement of prosthesis and spongy bone at the proximal of femur. After implantation of the prosthesis. the surrounding bone is partially shielded from load carrying and starts to resort. Stress shielding is the cause of the loss of proximal bone. Assessing stress distribution of femur is important to predict stress shielding. The initial stability and the stress shielding were investigated for two loading conditions approximating a single leg stance and a stair climbing. Three types of stems were studied by the finite element method to analyze the biomechanical effects of distal filling of cementless femoral stems, Three types of stems employed are a distal filling stem, a distal flexible stem, and a distal tapered stem.

• KSBB Journal
• /
• 제28권3호
• /
• pp.185-190
• /
• 2013

For the selection of peptide specifically binding to $Pb^{2+}$, the biopanning with the commercially available Ph.D.-7 phage displayed heptapeptide library was carried out against $Pb^{2+}$ immobilized on a metal-chelating IDA (iminodiacetic acid) resin. After four rounds of screening against $Pb^{2+}$-IDA including negative selections against charged bead with metal ions other than $Pb^{2+}$ and uncharged bead, several candidate lead-binding phage peptides were initially determined based on the order of frequency from the screened phage clones. Of the selected phage peptide sequences, the peptide of the highest frequency, CysSerIleArgThrLeuHisGlnCys (CSIRTLHQC) also exhibited the strongest affinity for $Pb^{2+}$ in binding assays for individual phage clones. However, there was not a significant difference in $Pb^{2+}$ affinity between selected peptides when using synthetic heptapeptides corresponding to the displayed peptide sequences of phage clones.

• 한국염색가공학회지
• /
• 제34권1호
• /
• pp.1-9
• /
• 2022

The durable FR treatments such Pyrovatex and Proban have been used for cotton fibers, while the finishes involve toxic ammonia or formaldehyde release during finishing process or finished products. In this study, ecofriendly flame-retardant treatment of cotton fabrics was carried out using UV-curable formulations of Vinyl bisphosphonic acid (VBPA), Acrylaminide and Triacryloylhexahydro-1,3,5-triazine, as a monomer, a comonomer and a cross-linking agent respectively, which can introduce a cross-linked copolymer networks. With an optimal finish formulation, the flame retardancy of LOI 29.8 was maintained even after 10 laundering cycles. In TGA analysis, the DTGA peak decreased from 389℃ to 252℃ and the amount of char yield increased from 6.1% to 46.1% compared to the untreated cotton. In addition, MCC analysis showed that Peak HR and THR decreased by 59.4% and 69.2% respectively, compared to the untreated cotton. The pyrolysis and combustion behaviors of the FR-treated cotton implied a condensed-phase flame-retarding mechanism.