• 품질경영학회지
• /
• 제42권3호
• /
• pp.325-338
• /
• 2014

Purpose: The purpose of this study was to explain de-painting phenomenon of KUH-1 tail blade and to propose useful solution of it by test. The proposed solution was evaluated by real flight, and then it applied to mass product to improve the paint qual ity of KUH-1 tail blade. Methods: This study investigated an adhesive ability of primer following surface sanding condition. The cross cut and scratch test were conducted to evaluate the adhesive strength. And the water flow test was designed to simulate a real flight condition under rain. Through water flow test, an optimal condition of tail blade to prevent a de-painting phenomenon was deduced. Finally, the improvement method was evaluated by real flight under rain. Results: The results of this study are as follows; The sequential polishing was most excellent method in primer painting quality. The results of test including cross cut, scratch and water flow showed that MIL-DTL-53039 paint with epoxy primer has excellent adhesive ability. To proof the effect of improvement, a real flight during a rain condition was conducted. Finally, the comparison between original and improved configuration was conducted. Conclusion: The painting quality of KUH-1 tail blade was improved through deriving an optimal painting condition. In detail, a condition of optimal sanding and a sort of primer and paint was showed. Finally, the reliability of tail blade was guaranteed through improving the quality of painting.

• 한국항공우주학회지
• /
• 제36권10호
• /
• pp.979-987
• /
• 2008

항공우주 구조물의 설계 시, 과도한 응력집중을 방지하기 위해 경감공의 위치를 변경해야 하는 경우가 종종 발생한다. 이러한 위치 최적 설계를 위해서는 경감공의 위치 갱신에 따라 변경된 구조 형상을 반영할 수 있도록 재 모델링을 수행해야 한다. 널리 사용되는 재 모델링 기법으로는 재 격자 생성기법을 들 수 있다. 그러나 구조물의 형상이 변경될 때마다 격자를 재생성 할 경우 많은 시간이 소요되며, 특히 사면체나 삼각형에 비해 좋은 성능을 가진 육면체나 사각형 격자 사용에 제약이 따르게 된다. 본 논문에서는 이러한 문제점을 보완하기 위해 이동최소자승법 기반의 중첩 격자 기법과 유전자 알고리듬을 이용한 새로운 위치 최적 설계 알고리듬을 제안하였으며, 제안된 위치 최적 설계 알고리듬의 성능을 평가하기 위해 2차원 구조물의 경감공 위치 최적 설계를 수행하였다.

• Smart Structures and Systems
• /
• 제17권5호
• /
• pp.819-835
• /
• 2016

In this paper, the activities carried out within the EU funded Clean Sky Joint Technology Initiative (JTI GRA) Project and aimed at developing a morphing flap, are illustrated. The reference device is a regional aircraft single slotted flap, enhanced with deforming capabilities to obtain improved hyper-lift performance. The design started with the identification of the internal architecture, intended to allow camber variations. A concentrated-hinge architecture was selected, for its ability to fit different curvatures and for the possibility of easily realizing an "armadillo-like" configuration, then avoiding the use of a complicate deformable skin. The flap layout is made of segmented ribs, elastically hinged each other and span-wise connected by conventional spars. Relative rotations of the rib elements are forced by SMA structural actuators, i.e., cooperating in the external loads absorption. Super-elastic SMA are used to make up recovery elastic elements, necessary to regain the original shape after activation. These further elements in turn contribute to the overall flap rigidity. After assessing the hinge number and the size of the SMA active and passive elements, the advanced design phase was dealt with. It was aimed at solving manufacturing issues and producing the executive drawings. The realized demonstrator was finally tested in lab conditions to prove its functionality in terms of whether target shape actuation or attained shape preservation under loads. On the basis of the numerical results and the experimental outcomes, precious hints were obtained for further developments of the concept.

• 제어로봇시스템학회논문지
• /
• 제18권6호
• /
• pp.546-554
• /
• 2012

This paper suggests a design method of an improved phase control loop for tracking resonant frequency of solid type precision resonant gyroscope. In general, a low cost MEMS gyroscope adapts the automatic gain control loops by taking a velocity feedback configuration. This control technique for controlling the resonance amplitude shows a stable performance. But in terms of resonant frequency tracking, this technique shows an unreliable performance due to phase errors because the AGC method cannot provide an active phase control capability. For the resonance control loop design of a solid type precision resonant gyroscope, this paper presents a phase domain control loop based on linear PLL (Phase Locked Loop). In particular, phase control loop is exploited using a higher order PLL loop filter by extending the first order active PI (Proportion-Integral) filter. For the verification of the proposed loop design, a hemispherical resonant gyroscope is considered. Numerical simulation result demonstrates that the control loop shows a robust performance against initial resonant frequency gap between resonator and voltage control oscillator. Also it is verified that the designed loop achieves a stable oscillation even under the initial frequency gap condition of about 25 Hz, which amounts to about 1% of the natural frequency of a conventional resonant gyroscope.

• 한국소음진동공학회논문집
• /
• 제22권11호
• /
• pp.1042-1048
• /
• 2012

A 2-axis gimbal system is one of main disturbance sources affecting image jitter response of a satellite. The gimbal system comprises azimuth stage and elevation stage, and these pointing mechanism can be rotated by stepping motors about its azimuth and elevation axes simultaneously. Because of the complex and coupled dynamic motion of the gimbal system, its moment of inertia and structural modes can be changed according to the system configuration, and thus the gimbal system generates complicated and non-linear disturbance characteristics. In order to improve the jitter response of a spacecraft, it is an indispensable process to reduce the micro-vibration disturbance level of the antenna system. In the present research, a 2-axis gimbal system was manufactured and then its micro-vibration test was performed in terms of two types of stepping motors(2-phase and 5-phase). The test results show that the disturbance level of the gimbal system can be reduced by replacing the 2-phase stepping motor with the 5-phase one, and the average disturbance attenuation ratio is 56 % in peak level and 48 % in standard deviation level. The experimental results confirm that it is an efficient jitter reduction method to adopt a high-phase stepping motor.

• 한국전자파학회논문지
• /
• 제25권2호
• /
• pp.208-216
• /
• 2014

달 탐사 미션 수행을 위한 지상국은 달 궤도선과 착륙선의 상태 정보 및 관측한 센서 데이터를 수신할 수 있어야 한다. 이러한 지상 시스템 개발 초기 단계에서는 정확한 링크 파라미터에 의한 링크 분석을 통해 지상 안테나의 크기 및 시스템 잡음 성능이 도출되어야 한다. 한편, 지상 안테나가 달 궤도선과 착륙선과 통신을 할 경우에 달을 지향하게 되고, 이 때 달은 자체 밝기에 의해 안테나의 수신 성능을 열화 시키는 잡음으로써 동작한다. 본 논문에서는 안테나가 달을 지향할 때 발생되는 수신 성능 열화에 대한 분석 결과를 제시한다. 결과 검증을 위해 달에 의한 안테나 잡음 온도를 우선 계산 한 후에 이를 본 논문에서 제안하는 시험 방식의 결과와 비교하였고, 그 결과는 허용 오차 수준에서 일치함을 확인하였다. 이는 달에 의한 안테나 잡음 온도의 계산 방식이 정당함을 검증한 것이므로 이 방식을 통하여 다양한 주파수와 안테나의 크기에 따른 달 탐사 지상 안테나의 수신 열화 분석을 수행할 수 있었다.

• 한국전자파학회논문지
• /
• 제24권10호
• /
• pp.1001-1007
• /
• 2013

다수의 저궤도 위성을 운영하는 경우, 위성별 운영 궤도에 의해서 지리적으로 고정된 하나의 지상국은 2개 이상의 위성과 통신을 해야 하는 상황이 발생된다. 일반적으로 위성에서 관측된 영상 데이터를 수신 및 처리하는 시스템은 위성별로 다를 뿐만 아니라, 1:1 백업 구성을 함으로써 지상 수신 안테나가 한정되어 설치된 지상국에서는 위성의 수가 많아질수록 데이터 전달을 위한 안테나에서 영상 수신 처리 시스템 간의 접속 설계가 복잡해지는 문제가 발생된다. 본 논문에서는 2개의 위성에 대해 동시 운영이 가능하며, 위성별 영상데이터 저장장치를 연결함으로써 확장이 가능한 매트릭스 구조의 수신 채널 구현 내용이 작성되어 있다. 구현된 수신 채널은 다목적실용위성 3호 발사 이후에 운영 검증을 완료하였으며, 확장 기능을 통해 추후 발사될 5호와 3A호에 대해서도 적용할 예정이다.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.13-18
• /
• 2017

In this work the augmented safety of Type 4 composite vessel in accordance with uniform-stress design has been demonstrated through a series of burst tests and structural analyses. For this end, three sample vessels were used: (1) designed as guided by the isotensoid dome theory (called iso-dome cylinder); (2) with dome longer compared to uniform-stress design (called prolate cylinder); and (3) with dome wider than uniform-stress design (called oblate cylinder). Structural analyses have been performed using ABAQUS finite element code based on the periodic symmetry to circumferential direction. As a result, the maximum stresses are induced around the bodies of all three cylinders. However, the analyses, with the assumption of possible defect demonstrate that the maximum stresses are induced around the dome knuckles for the prolate and the oblate cylinders. The results of the burst tests for the three cylinders show that the burst initiates from the cylinder body of the iso-dome cylinder and from the dome knuckles of the prolate and the oblate cylinders. Finally, it is recommended that, to comply with DOT CFFC 2007, the dome shape should be designed and fabricated as guided by the isotensoid dome theory.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.75-78
• /
• 2004

Various jet engines (Turbine engine family and RAM Jet engine) have been developed for high speed aircrafts. but their application to hypersonic flight is restricted by principle problems such as increase of total pressure loss and thermal stress. Therefore, the development of next generation propulsion system for hypersonic aircraft is a very important subject in the aerospace engineering field, SCRAM Jet engine based on a key technology, Supersonic Combustion. is supposed as the best choice for the hypersonic flight. Since Supersonic Combustion requires both rapid ignition and stable flame holding within supersonic air stream, much attention have to be given on the mixing state between air stream and fuel flow. However. the wider diffusion of fuel is expected with less total pressure loss in the supersonic air stream. So. in this study the direction of fuel injection is inclined 30 degree to downstream and the total pressure of jet is controlled for lower penetration height than thickness of boundary layer. Under these flow configuration both streams, fuel and supersonic air stream, would not mix enough. To spread fuel wider into supersonic air an aerodynamic force, baroclinic torque, is adopted. Baroclinic torque is generated by a spatial misalignment between pressure gradient (shock wave plane) and density gradient (mixing layer). A wedge is installed in downstream of injector orifice to induce an oblique shock. The schlieren optical visualization from side transparent wall and the total pressure measurement at exit cross section of combustor estimate how mixing is enhanced by the incidence of shock wave into supersonic boundary layer composed by fuel and air. In this study non-combustionable helium gas is injected with total pressure 0.66㎫ instead of flammable fuel to clarify mixing process. Mach number 1.8. total pressure O.5㎫, total temperature 288K are set up for supersonic air stream.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.685-688
• /
• 2005

플라즈마 디스플레이를 위한 효율적인 서스테인 드라이버와 이를 리셋 회로와 결합시키는 유용한 결합 방법을 제시한다. 제안된 서스테인 드라이버는 외부 인덕터와 패널에 존재하는 기생 커페시터 간의 직렬공진 방식을 이용한다. 이 회로는 4개의 스위칭 소자, 인덕터, 전원공급을 목적으로 하는 외부 커패시터로 구성된다. 기존의 방식과 비교하여 입력전원전압이 두배가 되지만 스위칭 소자에 가해지는 전압스트레스는 기존의 값과 거의 동일하며, 입력 전압을 별도의 승압없이 리셋 회로의 전원으로 사용할 수 있는 장점을 가진다. 이러한 회로적 구조는 서스테인 드라이버와 리셋회로를 간단히 구성할 수 있다. 이론적 분석을 바탕으로 동작원리와 설계 예를 제시하며, 7.5인치 AC PDP 패널을 이용한 실험을 통해 타당성을 검증한다.