• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1306-1311
• /
• 2009

In recent semiconductor manufacturing clean rooms, in order to improve clean room air quality, air washers are used to remove airborne gaseous contaminants such as $NH_3$, SOx and organic gases from the outdoor air introduced into clean room. Meanwhile, there is a large amount of exhaust air from a clean room. From an energy conservation point of view, heat recovery is therefore useful for reducing the outdoor air conditioning load for a clean room. Therefore it is desirable to recover heat from the exhaust air and use it to reheat the outdoor air. In the present study, numerical analysis and experiment was conducted to simulate the amount of energy reduction of exhaust air heat recovery type air washer system. The present numerical results showed good agreement with the results of the experimental data.

• 한국환경보건학회지
• /
• 제32권5호
• /
• pp.478-484
• /
• 2006

There was no significant difference in the CADR (Clean Air Delivery Rate) between physical aerosols, NaCl and smoke, and biological aerosols, airborne MS2 virus and P. fluorescens, which implicate that the hybrid-type of air purifier, applying the unipolar ion emission and the radiant catalytic ionization, imposed identical reduction effect on both physical aerosol and bioaerosol. Ventilation decreases the efficiency of air cleaning by unipolar ionization because high ventilation diminishes the particle concentration reduction effect. The particle removal efficiency decreases with increase in the chamber volume because of the augmented ion diffusion and higher ion wall loss rate. Particle size affects the efficiency of air ionization. The efficiency is high for particles with very small diameter because reduction of charge increases with particle size. If there is no increasing supply of ions, the efficiency of air cleaning by unipolar ionization increases with respect to initial concentration of particles because of the large space charge effect at high particle concentration and amplified electric field.

• 대한원격탐사학회지
• /
• 제22권6호
• /
• pp.495-505
• /
• 2006

에어로졸 종류별 구분을 위하여, 2005년 한해 동안 동북아시아지역을 대상으로 MODIS 에어로졸 자료인 에어로졸 광학두께(AOT)와 미세입자 비율(FF)을 분석하였다. 동북아시아 (북위 $20\sim50$도, 동경 $110\simt50$도)의 해양에서 관측된 에어로졸 자료를 이용하였다. AOT와 FF의 상호관계를 이용하면 주요 3가지 대기 오염 에어로졸인 먼지 입자, 해염입자, 오염 입자를 구분할 수 있다. 먼지 입자의 경우 주로 높은 AOT (>0.3)와 낮은 FF(<0.65)의 특징으로 봄철 빈번히 발생한다. 2005년 봄철 평균 AOT에 대한 먼지 입자의 기여도가 24.0%로 다른 계절보다 큼을 알 수 있다. 주로 인위적으로 발생하는 오염입자의 경우 높은 FF(>0.65)와 넓은 AOT범위에서 관측되었다. 여름철 오염입자의 평균 AOT는 $0.31{\pm}0.05$이고 전체 AOT에 대한 기여도는 79.8%로 여름철 오염 입자에 의한 영향이 큼을 알 수 있었다. 해염입자의 특징으로는 대부분의 AOT가 0.1이하로 낮은 AOT(<0.3)값이 나타났으며 FF의 경우 먼지입자보다는 크고 오염입자보다는 낮은 범위의 값이 주로 나타났다. 계절적으로 봄철$(0.33{\pm}0.11)$에 가장 높은 AOT값이 나타났으며(FF; $0.66{\pm}0.21$), 가을철 가장 낮은 AOT$(0.19{\pm}0.05)$값이 나타낫다(FF; $0.60{\pm}0.14$). 공간분포 특징으로는 중국연안으로 갈수록 높아지는 AOT특징이 나타났고, 이는 편서풍대에 속하는 관측지역의 지형학적인 특징으로 인해 중국대륙의 공단지역에서 발생한 에어로졸의 이동 때문인 것으로 여겨진다.증권업자의 중개활동으로 간주되어야 한다. 채권 ETS의 중개 규모가 일정 수준을 넘어설 경우 거래소에 준하는 보고, 공시 및 감시 요건이 부과되는 것이 바람직하다. 다섯째, 채권시장의 효율성을 강화하기 위해서 채권 ETS에 대해서 적용되는 투명성 강화, 시장분할 방지, 공정거래 등에 대한 규제는 거래 대상의 특성에 따라서 탄력적으로 조정될 수 있어야 한다.\pm}8.93ppm,\;20.19{\pm}0.97ppm,\;15.19{\pm}1.66ppm,\;21.20{\pm}1.88ppm,\;15.71{\pm}0.91ppm,\;55.48{\pm}2.42ppm,\;52.12{\pm}2.44ppm,\;23.80{\pm}1.98ppm$ 그리고 $11.14{\pm}0.51ppm$인 것으로 나타났다(비타민 C의 $SC_{50}$ 값:$9.61{\pm}0.93ppm$). 특히 마테 추출물과 솔잎 추출물은 총 페놀 함량이 높으면서 DPPH 라디칼과 superoxide anion 라디칼을 동시에 효율적으로 포착하는 효능을 지니고 있는 것으로 나타났다. 결론적으로 마테와 솔잎의 상업적인 추출물은 기능성 항산화제로서 유용한 소재로 사용 가능 할 것으로 사료된다.트폴리오보다 약 5배정도의 높은 1개월 평균초과수익률을 실현하였고, 반전거래전략의 유용성을 충분히 발휘하기 위하여 장단기의 투자기간을 설정할 경우에 6개월에서 36개월로 이동함에 따라 6개월부터 24개월까지는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는 거래전략은 존재하므로 이러한 전략을 개발 및 활용할

• 한국환경과학회지
• /
• 제22권8호
• /
• pp.1053-1062
• /
• 2013

The shortwave aerosol direct radiative forcing (SWARF) was analyzed using the Clouds and Earth's Radiant Energy System (CERES) data in the East Asian region from 2001 to 2010. In the Yellow Sea and the Korean Peninsula, located in the leeward side of China, significantly negative high SWARF at the top of atmosphere (TOA) occurs due to the long-range transport of anthropogenic (e.g. sulphate) and natural aerosols (e.g. mineral dust) from the East Asian continent. Conversely, eastern China has much higher levels of SWARF at the surface (SFC) due to anthropogenically emitted aerosol than in the Yellow Sea and the Korean Peninsula. Since the radiative forcing of aerosols in the atmosphere are different in type, aerosol types were classified into sea salt+sulphate, smoke, sulphate and dust by using satellite data. The analysis on the SWARF by the classified aerosol types indicated that sulphate occupies a predominant portion of the atmosphere in the Yellow Sea and the Korean Peninsula in the summer. In particular, the annual averages of the summer TOA SWARF increased in the Yellow Sea and the Korean Peninsula from 2001 to 2010.

• 한국지리정보학회지
• /
• 제14권2호
• /
• pp.109-127
• /
• 2011

대기 에어러솔은 대기중에 존재하는 미세입자로 인체 유해성을 지니고 있으며 기후변화에 있어서도 중요한 역할을 하는 변수로 알려져 있다. 게다가 대기 에어러솔의 주요 성분에 대한 정확한 평가는 환경에 미치는 영향에 있어서도 매우 중요하다. 이 때문에 지구관측 위성자료는 대기질 감시측면에서도 효과적인 수단으로 이용되고 있다. 따라서 본 연구에서는 인공위성 관측 자료를 이용하여 전구적인 규모의 대기 에어러솔의 주요 성분별 분포변화를 알아보고자 MODIS 에어러솔 광학두께(AOT; Aerosol Optical Thickness)와 미세입자분율(FMF; Fine Mode Fraction), 그리고 TOMS 자외선 흡수성 에어러솔 지수(AAI; UV Absorbing Aerosol Index)를 이용하여 네 가지의 주요 에어러솔의 성분(먼지, 탄소성, 황산화물, 해염)을 구분할 수 있는 방법을 제시하였다. 여기서 얻어진 결과물을 검증하기 위하여 에어러솔 예측 모델자료와 각 격자별 자료로 선형회귀분석을 수행한 결과, 본 연구에서 산출된 결과물이 에어러솔의 성분별 전반적인 패턴을 잘 표현하는 것을 확인 할 수 있었다. 이렇게 주요 에어러솔 타입으로 구분된 위성자료의 사용은 대기질 감시뿐만 아니라 기후변화연구에 있어서도 도움을 줄 것으로 사료된다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.11.1-11.1
• /
• 2009

Bulk-heterojunction type organic photovoltaic cells have been remarkably improved due to the development of efficient donors and post treatment process. However, most of researchers have studied on the OPVs using spin-coating method during the past decade. To commercialize the OPVs, much cheaper printing process should be developed such as inkjet, screen, gravure, and so on. In this study, we have focused on the development of printing technology using Inkjet and Aerosol-Jet printing, which can offer reliable device performance. Finally, 4.5% power conversion efficiency can be achieved under AM 1.5 1sun light illumination, which is the highest value in printed OPVs. We reveal that substantial improvement can be realized by highly efficient bulk heterojunction after printing. Also, we can confirm these two printing methods are promising fabrication methods for large area OPVs. Also, flexible and large area (18 cm2) printed OPVs have been fabricated and device performance will be discussed in detail.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.442-447
• /
• 2006

In semiconductor manufacturing clean rooms, it becomes important to remove airborne molecular contaminants as well as particulate contaminant in outdoor air introduced into clean rooms. One suitable control technique for these chemical contaminants is air washing by water in an outdoor air handling unit. In order to enhance the removal efficiency of chemical contaminants the effect of adding a heating and humidifying process before an air washer was examined.

• 대한기계학회논문집B
• /
• 제28권9호
• /
• pp.1066-1074
• /
• 2004

With a diode corona charger, which is a component of ELPI(Electrical Low Pressure Impactor), aerosol particles are charged to make electrical detection possible before they are collected by the impactor. We designed and evaluated two cylindrical corona chargers, each of which had a central corona needle electrode. For the performance evaluation of each corona charger the polydisperse dioctyl sebacate(DOS) particles, with diameters of 0.1∼0.8 $\mu$m and NaCl particles, smaller than 0.1$\mu$m, were used. The particles were then led through an electrostatic classifier (TSI model 3081) to classify monodisperse aerosol with minimal size deviation. After evaluating the wall loss of the particles in the corona charger, we measured the product of penetration and number of charges, Pㆍn, to evaluate the corona charger efficiency at high positive voltages of 4, 5, 6 kV.

• Environmental Engineering Research
• /
• 제19권3호
• /
• pp.215-221
• /
• 2014

Nano-sized $TiO_2$ particles were produced by a premixed flame aerosol reactor, and they were immobilized on a mesh-type substrate in form of particulate film. The reactor made it possible maintaining the original particulate characteristics determined in the flame synthetic process. The particulate morphology and crystalline phase were not changed until the particulate were finally coated on the substrate, which resulted in the better performance of the photocatalytic conversion of the volatile organic compounds (VOCs) in the ultraviolet $(UV)-TiO_2$ system. In the flame aerosol reactor, the various specific surface areas and the anatase weight fractions of the synthesized particles were obtained by manipulating the parameters in the combustion process. The performance of the $TiO_2$ particulate films was evaluated for the destruction of the VOCs under the various UV irradiation conditions. The decomposition rates of benzene and formaldehyde under the irradiation of UV-C of 254 nm in wavelength were evaluated to check the performance of $TiO_2$ film layer to be applied in air quality control system.

• 한국입자에어로졸학회지
• /
• 제5권4호
• /
• pp.189-197
• /
• 2009

Wet-type particulate removal system is employed in most of ironmaking processes. These de-dusting systems require additional downstream aggregates for treatment of water and for drying of the collected slurry. Thus dried slurry can be pressed in shape of briquettes and recycled in the steelmaking process. Different from the wet-type, the dry-type particulate removal systems generate no slurry. A high-temperature, high-pressure de-dusting system with inertial inlet was developed. The target application of this system was to remove particulate matter generated from the novel ironmaking process and other steelmaking processes. In this study we conducted tests with this newly developed system to evaluate the performance of the silica-carbide (SiC) ceramic filters. In addition, for purpose of comparison, we also conducted tests with a unit which has conventional direct inlet. Fe-Particles collected from the novel ironmaking process were used in our tests as test dusts. The temperature and the pressure were kept constant at their respective values $800^{\circ}C$ and $3kg_f/cm^2$.