• Applied Chemistry for Engineering
• /
• v.23 no.4
• /
• pp.383-387
• /
• 2012

This paper presents an easy way to prepare carbon dioxide sorbent by using commercially available fumed silica particles (AEROSIL). AEROSIL was impregnated with various concentration of polyethyleneimine (PEI) in methanol and $CO_2$ capture ability was analyzed by thermo gravity analysis (TGA). The $CO_2$ adsorption capacity of 50 wt% PEI-impregnated AEROSIL was 126.2 mg/g-sorbent at $75^{\circ}C$ and this capacity was substantially higher than that of the mesoporous silica such as HMS (101.0 mg/g-sorbent) and MSU-J (66.1 mg/g-sorbent).

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.332-336
• /
• 2009

When NCAs(non-conductive adhesives) are used for adhesion of micro-electronic devices, they often show problems such as delamination and cracking, due to the differences of CTE(coefficients of thermal expansion) between NCAs and substrates. Additions of inorganic particles or flexibilizers have been performed to solve those problems. The effects of silica addition on thermal/mechanical properties of amino modified siloxane(AMS)/silica/epoxy-nanocomposites were examined. The silica was treated by 3-glycidoxypropyltrimethoxysilane(GPTMS) for better compatibility between silica and epoxy matrix. AMS/silica/epoxy-nanocomposites filled with various amounts of AMS(1 and 3 phr) and various amounts of silica(3, 5 and 7 phr) were prepared. And Tg, moduli and CTE of nanocomposites were analyzed. Tg of AMS/Aerosil(non-modified silica)/epoxy-nanocomposites decreased from 125 to $118^{\circ}C$ with increasing Aerosil contents and moduli increased from 2,225 to 2,523 MPa with increasing Aerosil contents. Tg of AMS/M-silica (modified silica)/epoxy-nanocomposites decreased from 124 to $120^{\circ}C$ with increasing M-silica contents and moduli increased from 1,981 to 2,743 MPa with increasing M-silica contents. CTE of AMS/Aerosil/epoxy-nanocomposites and AMS/M-silica/epoxy-nanocomposites showed decreasing tendency regardless of the surface treatments.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.337-340
• /
• 2011

This study investigates the rheological characteristics of $SiO_2$-Kerosene gel propellants with Aerosil(R) R972, Silica 230, Silica 530. Power-law rheological model is used to confirm whether or not gelification is achieved. It was found that the produced gel have shear-thinning effect, and that the viscosity of the gel propellants increases with increasing $SiO_2$ concentration. Among gellants used in this study, gel propellant with Aerosil(R) R972 fits most to the power law model as the shear rate increases. However, gels produced with Silica 230 and Silica 530 gellant deviate from the power law model when the shear rate regime is below 100 [1/s].

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1212-1215
• /
• 2004

Diffraction modes of holographic grating were fabricated with polyurethane acrylates(PUA). Two types of silica (AEROSIL 200 and AEROSIL R812) were added to reduce the shrinkage of polymer matrix. It was founded that shrinkage of PUA composite film was reduced with the addition of silica. HPDLC based PUA/silica composite also showed high diffraction efficiency. The morphology of the resultant gratings was analyzed by using scanning electron microscopy(SEM) and Tg of the polymer matrix by dynamic mechanical thermal analysis(DMTA).

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2724-2730
• /
• 2012

A new heterogeneous acidic catalyst was successfully prepared by impregnation of silica (Aerosil 300) by an acidic ionic liquid, named 1-(4-sulfonic acid)butylpyridinium hydrogen sulfate [$PYC_4SO_3H$][$HSO_4$], and characterized using FT-IR spectroscopy, the $N_2$ adsorption/desorption analysis (BET), thermal analysis (TG/DTG), and X-ray diffraction (XRD) techniques. The amount of loaded acidic ionic liquid on Aerosil 300 support was determined by acid-base titration. This new solid acidic supported heterogeneous catalyst exhibits excellent activity in the synthesis of 2-aryl-2,3-dihydroquinazolin-4(1H)-ones by cyclocondensation reaction of 2-aminobenzamide with aromatic aldehydes under solvent-free conditions and the desired products were obtained in very short reaction times with high yields. This catalyst has the advantages of an easy catalyst separation from the reaction medium and lower problems of corrosion. Recycling of the catalyst and avoidance of using harmful organic solvent are other advantages of this simple procedure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.847-848
• /
• 2004

We studied a low density 8CB liquid crystal-hydrophobic aerosil dispersions imbedded in submicron-size cylindrical pores. The nanosize spherical aerosil particles are adsorbed at the pore wall and hinder the planar anchoring. The adsorption is temperature dependent, and an axial to radial molecular configuration transition occurs within the cylindrical pores.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.6
• /
• pp.23-31
• /
• 2012

Present work deals three families of $SiO_2$ gelling agents which have been used to produce gel fuel based on Kerosene. Jet A-1 is chosen as fuel where power-law rheological model is used to confirm whether or not the gelification is achieved depending on the %wt of gellant. It was confirmed that the produced jelly-like substance have shear-thinning effect, and that its apparent viscosity increases as $SiO_2$ concentration increases. Compared to other gellants, gel with Aerosil(R) R972 fits most to the power-law model, while gels with Silica 230 and Silica 530 deviate from the power-law model. The rheological characteristics behaved differently depending on the mixing method(vortex mixing and manual mixing) when gellant concentration is increased.

• Membrane Journal
• /
• v.24 no.4
• /
• pp.301-310
• /
• 2014

In this study, the silica nanoparticles were considerably chosen to improve a dimensional stability, proton transport and electrochemical performance of the resulting inorganic-organic nanocomposite membranes. For this purpose, hydrophobic silica (Aerosil$^{(R)}$ 812, Degussa) and hydrophilic silica (Aerosil$^{(R)}$ 380, Degussa) nanoparticles were, respectively, introduced into a Sulfonated poly(arylene ether sulfone) (SPAES) polymer matrix. The $SiO_2$ particles are evenly dispersed in a SPAES matrix by the aid of a non-ionic surfactant (Pluronics$^{(R)}$ L64). A $SiO_2$ content plays an important role in membrane microstructures and membrane properties such as proton conductivity and water uptake. Therefore, to study nanocomposite membranes with excessive amount of silica, the content of silica nanoparticles were increased up to 5 wt%. Interestingly, a hydrophobic $SiO_2$ containing nanocomposite membrane showed better electrochemical performance (29% higher than pristine SPAES) despite of low proton conductivity due to its adhesive properties with a catalyst layer in a single cell test. All the silica-SPAES membranes exhibited better performance than a pristine SPAES membrane.

• Applied Chemistry for Engineering
• /
• v.21 no.6
• /
• pp.670-675
• /
• 2010

Inorganic-organic hybrid material such as vinyl-nano sized silica ball was synthesized by acrylo-alkoxysilane and nano silica ball with different particle size. And then they were formulated into acrylic-melamine clearcoat. This material is fully characterized with various analytical methods and applied for strength measurement. The glossy effect, matting effect and anti-scratching properties of materials were investigated for further growth and maintenance. When the particle size of nano silica ball is 20~30 nm, the glossy retain effect was increased by 7% compared to bare acrylic-melamine clearcoat. When a commercially available silica Aerosil 200 (Hydrophilic fumed silica, average particle size 12 nm, Degussa) react with vinyl alkoxysilane vinyl-fumed silica complex form. The vinyl-fumed silica along with clearcoat increases only 2% increase at glossy retain. Nano-scratch test results also support the glossy retain effect of vinyl nano-sized silica ball in clearcoat.

• Journal of Adhesion and Interface
• /
• v.18 no.1
• /
• pp.25-32
• /
• 2017

For application to display module junction process, the silk screen printing based on UV curable acrylic pressure sensitive adhesive(PSA) with silica nano-particles and the rheological properties were studied to investigate the effect on printability and adhesion. The monomers for PSA were based on 2-ethylhexyl acrylate(2-EHA) and acrylic acid(AA) 93:7, butyl acylate(BA), 2-hydroxyethyl acrylate(2-HEA) and tetrahydrofurfuryl acrylate(THFA) were added. Additionally, hydrophobic and hydrophilic nano-particles AEROSIL R974 and AEROSIL 200 were added, respectively. When the ratio of nano-particle was used above 4 or 7 phr, G' and ${\eta}^*$ were increased significantly. When the ratio of AEROSIL 200 was used above 7 phr, the penetration property was decreased during the silk screen printing. We found that the adhesion was decreased with increasing the nano-particle content, and it was decreased in the case of the hydrophilic nano-particle AEROSIL 200.