• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.541-547
• /
• 2000

Experiments were done for the comparison of performance and flow characteristics between a two stage axial flow fan and a counter-rotating axial flow fm. The fan performance curves were obtained by the Korean Standard Testing Methods for Turbo Fans and Blowers (KS B 6311). The fan flow characteristics were measured using a five-hole probe by the non-nulling method. Each stage of the two stage axial flow fan used for the present study has an eight bladed rotor and thirteen stator blades. The front and the rear rotor of the counter-rotating axial flow fan have eight blades each and are driven by coaxial counter rotating shafts through a gear box located between the rear rotor and the electric motor. Both of the two axial fan configurations use identical rotor blades and the same operating conditions for the one-to-one comparison of the two. Performance characteristics of the two configurations were obtained and compared by varying the blade setting angles and axial gaps between the blade rows. The passage flow fields between the hub and tip of the fans were measured and analyzed for the particular operating conditions of peak efficiency, minimum and maximum pressure coefficients.

• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1252-1257
• /
• 2009

항공기의 외부장착물 분리해석이 가능한 Off-line 6-DOF 시뮬레이션 프로그램을 개발 하였다. 개발한 프로그램은 풍동시험이나 CFD 해석을 통해 구축된 공력 데이터베이스를 이용하여 외부장착물의 분리 궤적을 예측할 수 있다. 공력 계수의 계산에는 flow angle 방법을 적용하였으며 분리 궤적 계산에는 사출력과 구속 조건의 적용이 가능하도록 하였다. 개발한 프로그램을 이용하여 군용항공기의 분리 궤적을 계산하였으며 이를 CTS 시험 결과와 비교하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권4호
• /
• pp.365-370
• /
• 2011

This paper presents the air-to-air missile autopilot design for a $180^{\circ}$ heading reversal maneuver during boost-phase. The missile's dynamics are linearized at a set of operating points for which angle of attack controllers are designed to cover an extended flight envelope. Then, angle of attack controllers are designed for this set of points, utilizing a pole-placement approach. The controllers' gains in the proposed configuration are computed from aerodynamic coefficients and design parameters in order to satisfy designer-chosen criteria. These design parameters are the closed-loop frequency, damping ratio, and time constant; these represent the characteristics of the control system. To cope with highly nonlinear and rapidly time varying dynamics during boost-phase, the global gain-scheduled controller is obtained by interpolating the controllers' gains over variations of the angle of attack, Mach number, and center of gravity. Simulation results show that the proposed autopilot design provides satisfactory performance and possesses good [ed: or "sufficient" or "excellent"] capabilities.

• 한국항공우주학회지
• /
• 제39권9호
• /
• pp.816-822
• /
• 2011

본 연구에서는 프로펠러의 형상 및 환경 요소의 영향에 따른 추력값을 빠르게 계산할 수 있는 프로그램을 개발하였다. 여기서 유도 요소를 계산하기 위해서, 카와다에 의해 소개된 준-무한 나선와류 모델을 이용하였다. 본 code의 구조는 Wrench의 프로펠러 양력선 이론에 기초하여 제작되었으며, 프로펠러의 추력, 파워 및 효율 등의 공력값을 계산할 수 있다. 1차적인 프로그램의 신뢰성 있는 검증을 위해 NACA 보고서의 시험 결과와 비교 및 검증을 시행하였다. 2차적인 프로그램의 검증을 위해서는, 프로펠러 회전속도와 전진 속도에 변화를 주면서 아음속 풍동 시험을 수행하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제6권1호
• /
• pp.52-60
• /
• 2005

The CFD coupled aeroelastic analyses have significant advantages over linear panel methods in their accuracy and usefulness for the simulation of actual aeroelastic motion after specific initial disturbance. However, in spite of their advantages, a heavy computation time is required. In this paper, a method is discussed to save a computational cost in the time domain aeroelastic analysis based on the system identification technique. The coefficients of system identification model are fit to the computed time response obtained from a previously developed aeroelastic analysis code. Because the non-dimensionalized data is only used to construct the model structure, the resulting model of the unsteady CFD solution is independent of dynamic pressure and this independency makes it possible to find the flutter dynamic pressure without the unsteady aerodynamic computation. To confirm the accuracy of the system identification methodology, the system model responses are compared with those of the CFD coupled aeroelastic analysis at the same dynamic pressure.

• Ocean Systems Engineering
• /
• 제6권1호
• /
• pp.1-21
• /
• 2016

The global performance of the 5 MW OC4 semisubmersible floating wind turbine in random waves with or without steady/dynamic winds is numerically simulated by using the turbine-floater-mooring fully coupled dynamic analysis program FAST-CHARM3D in time domain. The numerical simulations are based on the complete second-order diffraction/radiation potential formulations along with nonlinear viscous-drag force estimations at the body's instantaneous position. The sensitivity of hull motions and mooring dynamics with varying wave-kinematics extrapolation methods above MWL(mean-water level) and column drag coefficients is investigated. The effects of steady and dynamic winds are also illustrated. When dynamic wind is added to the irregular waves, it additionally introduces low-frequency wind loading and aerodynamic damping. The numerically simulated results for the 5 MW OC4 semisubmersible floating wind turbine by FAST-CHARM3D are also extensively compared with the DeepCWind model-test results by Technip/NREL/UMaine. Those numerical-simulation results have good correlation with experimental results for all the cases considered.

• 한국항공우주학회지
• /
• 제37권2호
• /
• pp.121-130
• /
• 2009

전진 비행중인 자동회전 로터에 대한 비정상 수치해석 기법이 개발되었다. 자동회전 로터의 플래핑과 회전운동 방정식은 주어지는 시간간격에 따라 연속적으로 적분되며 이 때 회전면에서의 유도 속도장은 동적 유도흐름 이론(dynamic inflow theory)에 의해 계속 업데이트 되면서 블레이드의 모든 요소에서 유효 받음각을 결정하여 비정상 상태를 모사한다. 로터의 임의의 초기 회전속도 및 플래핑각에서 정상상태로 천이(transition)되는 과정을 시뮬레이션 하였고 블레이드 에어포일 공력 데이터들을 이용하여 방정식들의 수치해인 자동회전의 정상상태를 예측하였다. 2차원 Navier-Stokes 솔버로 받음각과 레이놀즈수에 따라 해석된 에어포일 데이터를 이용하여 자동회전의 비정상 시뮬레이션을 수행한 해석 결과는 풍동실험 결과와 잘 일치하였다

• 한국군사과학기술학회지
• /
• 제17권1호
• /
• pp.149-157
• /
• 2014

In this paper, we investigated the sensitivity of aerostatic force coefficients of multi-layer radom in the various wind speeds. The test was conducted in KOCED Wind Tunnel Center in Chonbuk National University, and wind speeds were in the range from 5 m/s to 26 m/s in order to determine the Reynolds number independence. The test results of present multi-layer radom were not affected by the Reynolds number, The maximum positive pressure coefficient was found to be 1.08 at the center of the front of the plane in angle of attack of 0 degree, the maximum negative pressure coefficient was -2.03 at the upper right corner in angle of attack of 120 degree, while maximum drag coefficient was 1.11 in angle of attack of 180 degree.

• Tribology and Lubricants
• /
• 제21권3호
• /
• pp.114-121
• /
• 2005

As fuel cell system is environmental friendly generator, its performance depends on its air supply system. Because, fuel cell stack generates electrical energy by electron and the electron is generated by reacting between air and hydrogen. So, more and more compressed air is supplied, more and more the energy can be obtained. In this study, turbo-expander supported by air foil bearing is introduced as the air supply system used by fuel cell systems. The turbo-expander is a turbo machine which operates at high speed, so air foil bearings suit its purpose for the bearing elements. Analysis for confirming the stability and endurance is conducted. Based on FDM and Newton-Raphson method, characteristics of air foil bearing, dynamic coefficients, pressure field and load capacity, are obtained. Using the characteristics of air foil bearing, the rotordynamic analysis is performed by finite element method. The analysis (stability analysis and critical speed map) shows that turbo-expander is stability at running speed. After the analysis, the test process and results are presented. The goals of test are running up to 90,000 RPM, flow rate of 150 $m^3/h$ and pressure ratio of 1.15. The test results show that the aerodynamic performance and stability of turbo-expander are satisfied to the primary goals.

• 한국시뮬레이션학회논문지
• /
• 제28권3호
• /
• pp.83-89
• /
• 2019

본 연구는 회전 비행체(Magnus rotor)를 탑재한 분산탄두의 분산 균일도에 미치는 요인 분석과 성능지표를 도출하기 위해 모탄의 속도 V와 회전속도 ${\omega}$, 비행경로각(flight path angle) ${\gamma}$ 그리고 고도 h의 변화에 따른 해석 결과를 기술했으며, 이때 모탄의 회전속도와 속도의 비를 새로운 변수로 정의했다. 자탄의 분산 해석에는 풍동실험을 통해 획득한 공력계수를 사용한 6 자유도 운동방정식을 이용했으며, 분산도 분석을 위해 회귀분석과 결정계수를 구해 분산도를 평가했다. 해석결과 최적의 회전속도와 낙하속도의 비, 비행경로각(flight path angle)을 구할 수 있었으며, 방출고도는 분산도에 회전속도와 낙하속도의 비, 비행경로각(flight path angle)의 영향에 비해 영향은 크지 않고, 자탄의 분산반경에 영향이 큰 것을 확인했다.