• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.143-149
• /
• 2014

The Disaster planning for the reservoir should be more quickly and intuitively establish measures by means of the sequential monitoring of change status of the reservoir water level and water surface area. This paper presents an approach using the orthophoto image produced by the periodic unmanned aerial photogrammetry and analyzed the feasibility. Total three time of unmanned aerial survey were conducted to make orthophoto images for the Seongnae reservoir and we analyzed the amount of changes for water level and surface area compare with each images. As the Analysis results, it was possible to effectively observe the increase in the water level rises and the surface area due to the rainfall. The maximum deviations of orthophoto images was 7.5cm in X-direction, 10.8cm in Y-direction and 14.1cm in elevation compare with ground surveying results. Therefore, we conclude that the unmanned aerial photogrammetry could be applied with comprehensive reservoir monitoring works for disaster management for reservoir in the future. And, the orthophoto production takes about two hours to shoot the images, and approximately four hours is considered for the image processing. So, the unmanned aerial photogrammetry is considered to be the best disaster work that requires urgent because analysis is possible in the shooting day.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.5
• /
• pp.349-356
• /
• 2017

In this study, we propose a method to investigate topographic characteristics by applying machine learning which is an artificial intelligence analysis method based on the spatial data constructed using UAV and the training data created through spatial analysis. This method provides an alternative to the subjective judgment and accuracy of spatial data, which is a problem of existing topographic characteristics survey for officially assessed land price. The analysis method of this study is expected to improve the problems of topographic characteristics survey method of existing field researchers and contribute to more accurate decision of officially assessed land price by providing more objective land survey method.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_3
• /
• pp.1965-1974
• /
• 2021

Satellite remote sensing approach can be actively used for forest monitoring. Especially, it is much meaningful to utilize Korea multi-purpose satellites, an independently operated satellite in Korea, for forest monitoring of Korea, Recently, several studies have been performed to exploit meaningful information from satellite remote sensed data via machine learning approaches. The forest information produced through machine learning approaches can be used to support the efficiency of traditional forest monitoring methods, such as in-situ survey or qualitative analysis of aerial image. The performance of machine learning approaches is greatly depending on the characteristics of study area and data. Thus, it is very important to survey the best model among the various machine learning models. In this study, the performance of deep neural network to classify artificial or natural forests was analyzed in Samcheok, Korea. As a result, the pixel accuracy was about 0.857. F1 scores for natural and artificial forests were about 0.917 and 0.433 respectively. The F1 score of artificial forest was low. However, we can find that the artificial and natural forest classification performance improvement of about 0.06 and 0.10 in F1 scores, compared to the results from single layered sigmoid artificial neural network. Based on these results, it is necessary to find a more appropriate model for the forest type classification by applying additional models based on a convolutional neural network.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.107-119
• /
• 2019

As the development of ICT and integration technology, many changes and innovations in agriculture field are implemented. The agricultural sector has shifted from a traditional industry to a new industrial form called the 6th industry combined with various advanced technologies such as ICT and IT. Various approaches have been attempted to analyze and predict crops based on spatial information. In particular, a variety of research has been carried out recently for crop cultivation and smart farms using drones. The goal of this study was to establish an agricultural drought monitoring system using drones to produce scientific and objective indicators of drought. A soil moisture sensor was installed in the drought area and checked the actual soil moisture. The soil moisture data was used by the reference value to compare and analyze the temperature and NDVI established by drones. The soil temperature by the drone thermal image sensor and the NDVI by the drone hyperspectral was analyzed the correlation between crop condition and soil moisture in study area. To verify this, the actual soil moisture was calculated using the soil moisture measurement sensor installed in the target area and compared with the drone performance. This study using drone drought monitoring system may enhance to promote the crop data and to save time and economy.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.1
• /
• pp.80-91
• /
• 2021

The purpose of this study is to present the applicability to the effective survey into the actual condition of lands such as analysis of occupied location of government owned lands based on orthoimages created from aerial photographs taken by UAV. The boundary point coordinates and areas of the parcels were observed respectively by VRS-GNSS surveying and orthoimages for each land use of two categories of land, i.e. building site and farmland. As a result of comparing boundary point coordinates and areas extracted from UAV orthoimages with VRS-GNSS surveying data which were used as reference data, the RMS error of the coordinates for the boundary points was ±0.074m for both X and Y in the building site, and ±0.150m and ±0.127m for the X and Y respectively in the farmland. The positional error of the boundary point was 1.7~ 2 times higher in the farmland than in the building site where the boundary points were relatively clear. The RMS error of ±8.964㎡ of areas in the farmland was 4.7 times higher than that of ±1.898㎡ of areas in the building site. The area errors of all 22 parcels measured from the orthoimage were found to be within the allowed error range, indicating that it is feasible to apply the orthoimage generated by UAV to survey of government owned lands in terms of accuracy.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.1 s.19
• /
• pp.77-82
• /
• 2002

This study try to attempt to manage on-line system of land cadastral by computing land registration information, for application to computerized cadastral work through Geo-Spatial Information System. And also, in order to consult D/B of cadastral information, cadastral non-coincidence area uncapable to D/B when land-survey, taking advantage of GSIS drawing made by the present condition drawing and the aerial photograph survey by general survey, makes actual cadastral control point by some selected investigators. And so, it can be compared and analysed by the result of the present survey and, through the interpretation of the relatives, it aims to improve the precision of survey technique in consulting cadastral information D/B in the future.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.2
• /
• pp.22-37
• /
• 2018

Unmanned aerial vehicles (UAV) have attracted considerable attention both at home and abroad. The UAV is equipped with a camera that shoots images, which is advantageous for access to areas where archaeological investigations are not possible. Moreover, it is possible to acquire three-dimensional spatial image information by modeling the terrain through aerial photographing, and it is possible to specify the interpretation of the terrain of the survey area. In addition, if we understand the change of the terrain through comparison with past aerial photographs, it will be very helpful to grasp the existence of the ruins. The terrain modeling for searching these remains can be divided into two parts. First, we acquire the aerial photographs of the current terrain using the drone. Then, using image registration and post-processing, we complete the image-joining and terrain-modeling using past aerial photographs. The completed modeled terrain can be used to derive several analytical results. In the present terrain modeling, terrain analysis such as DSM, DTM, and altitude analysis can be performed to roughly grasp the characteristics of the change in the form, quality, and micro-topography. Past terrain modeling of aerial photographs allows us to understand the shape of landforms and micro-topography in wetlands. When verified with actual findings and overlapping data on the modelling of each terrain, it is believed that changes in hill shapes and buried Microform can be identified as helpful when used in low-flying applications. Thus, modeling data using aerial photographs is useful for identifying the reasons for the inability to carry out archaeological surveys, the existence of terrain and ruins in a wide area, and to discuss the preservation process of the ruins. Furthermore, it is possible to provide various themes, such as cadastral maps and land use maps, through comparison of past and present topographical data. However, it is certain that it will function as a new investigation methodology for the exploration of ruins in order to discover archaeological cultural properties.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.25-27
• /
• 2004

Han River water landscape changes between 1966 and 2002 were detected by interpreting IKONOS images, aerial photographs. Digital photogrammetry technique was used in this process. Most of water landscape change are disappearance of sandbars and meandering streams in 1966. It is mainly due to the stream straightening for housing site development.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1244-1247
• /
• 2002

This paper discusses various algorithms to the fusion of multi-spectral image. These fusion techniques have a wide variety of applications that range from hospital pathology to battlefield management. Different algorithms in each fusion level, namely data, feature, and decision are compared. The PCT-Based algorithm, which has the characteristic of data compression, is described. The algorithm is experimented on a foliated aerial scene and the fusion result is presented.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.487-493
• /
• 2014

A geographic survey, which requires much of working hours in the digital mapping process, is consisted with the complementary survey and the attribute survey of topography and topographic features, and depended on the field survey. In previous research, using the location-based image had been recommended for diminishing the workload of field survey and post processing. For this research, we have developed the hardware and software for gathering and processing the location-based images with referencing results from the previous research. Those Geographic surveys were performed using developed system on 1/5,000 map sheets for Si and Gun area, respectively. The results have been evaluated as the mobile geographic survey system were able to replace the large part of field survey, and also the working hours were decreased by 37.5% at Si area. However, the complementary survey was needed for the attributes of topography and topographic features that were occluded by the parked vehicles or located in the areas without entry of vehicles.