• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.7
• /
• pp.389-397
• /
• 2014

This paper focuses on advanced receiver for interference suppression or cancellation from neighbor cells in the 3GPP Rel-12 standard. From UE (User Equipment) perspective, the advanced receiver which can manage inter-cell interference of adjacent cell is required to support and manage fast-growing wireless data traffic. In 3GPP standard, NAICS which is one of approaches to improve SINR and receiver performance by directly suppression or cancellation of data (PDSCH) and control (PDCCH) signal from interference cells is discussed. In this paper, we briefly introduce the concept and candidate receivers for NAICS (Network Assisted Interference Cancellation and Suppression) based on 3GPP Rel-12 standard, and simulation results for basic NAICS receiver performance are provided.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.227-232
• /
• 2008

Stirling engine for solar thermal power is an essential part of Dish-Stirling system which generates electricity by using direct normal irradiation and will go into commercialization in near future. For the Stirling engine used in this study is Solo 161 model the capacity of which is 10 kWe and was already used for the Dish-Stirling system of KIER in Jinhae. The receiver of Stirling engine absorbes concentrated solar radiation and transfer it to working fluid of Hydrogen. The working condition of striling engine is high temperature and high pressure to make high efficiency. Therefore the receiver should stand against high temperature of above 800 $^{\circ}C$ and high pressure of max. 150 bar with good performance of heat transfer. The receiver is composed of 78 Inconel tubes of 1/8" with thickness of 0.71 mm and two reserviors which is connected with two cylinders. In order to know the charaterristics of heat transfer of Stirling engine receiver, simulation on the heat transfer of the receiver of Solo 161 is conducted by using CFD code of Fluent. The heat flux on the receiver surface has a shape of Gaussian distribution so, it is necessary to simulate a whole receiver. However, It is difficult and time consuming to simulate the whole receiver that one tube with different heat flux conditions are considered in this study. From the simulation results, heat transfer charateristics of receiver are observed and tube wall and fluid temperature and heat transfer coefficient are obtained and compared with the calculated results from Dittus-Boelter's correlation.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3124-3126
• /
• 2000

The application of IR(Infrared) communication is very wide and IR receiver has become a standard of home entertainment. A preamplifier with single 5V supply was designed for IR receiver IC. To operate at long distance, receiver IC should have high gain and low noise characteristic. To provide constant output signal magnitude, independent of transciever distance, gain limiting stage is needed. And to cut-off DC noise component effectively, large resistance and capacitance are required. Transimpedance type preamplifier, and diode limiting amplifier, and current limiting amplifier were designed. It is another function of current limiting amplifier that transforms single input signal to differential output signal. Using AMS BiCMOS model, both BJT version and MOS version was designed. Total power consumption is O.lmW, and IC size is $0.3mm^2$

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.313-318
• /
• 2011

When wireless channels undergo fast fading, non-coherent frequency shift keying (FSK) (de)modulation schemes may be considered for amplify-and-forward (AF) cooperative communications. In this paper, we derive the bit-error-rate performance of partial non-coherent receiver as a lower bound of the optimal non-coherent receiver for FSK modulated AF cooperative communications. From the simulation and analytical results, it is found that the derived lower bound is very closed to simulation results. This result shows that knowing partial channel state information may not improve system performance significantly. On the other hand, conventional optimal non-coherent receiver involves complicated integration operation. To address the above complexity issue, we also propose a near optimal non-coherent receiver which does not involve integration operation. Simulation results have shown that the performance gap between the proposed near optimal receiver and the optimal receiver is small.

• Journal of Broadcast Engineering
• /
• v.9 no.1
• /
• pp.32-42
• /
• 2004

In this paper we apply space-time block code with multiple transmitter/receiver antennas to the Advanced Television Systems Committee (ATSC) terrestrial broadcasting systems. Especially, we apply Aiamouti scheme with two transmitter antennas and multiple receiver antennas to the ATSC broadcasting system. Also. diversity technique with multiple receiver antennas and space-time block code scheme with multiple transmitter/receiver antennas are compared. Our simulation results show that the ATSC broadcasting system with multiple transmitter/receiver antennas has an extremely good performance than the scheme with single transmitter/receiver antenna in the Rayleigh fading channel.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.11
• /
• pp.3-11
• /
• 2015

An advanced receiver which can manage inter-cell interference is required to cope with the explosively increasing mobile data traffic. 3rd Generation Partnership Project (3GPP) has discussed network assisted interference cancellation and suppression (NAICS) to improve signal-to-noise-plus-interference ratio (SINR) and receiver performance by suppression or cancellation of interference signal from inter-cells. In this paper, we propose the advanced receiver based on soft decision to reduce the interference from neighbor cell in LTE-Advanced downlink system. The proposed receiver can suppress and cancel the interference by calculating the unbiased estimation value of interference signal using minimum mean square error (MMSE) or interference rejection combing (IRC) receiver. The interference signal is updated using soft information expressed by log-likelihood ratio (LLR). We perform the system level simulation based on 20MHz bandwidth of 3GPP LTE-Advanced downlink system. Simulation results show that the proposed receiver can improve SINR, throughput, and spectral efficiency of conventional system.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.312-318
• /
• 2014

The altitudes of GEO satellites are higher than those of GPS satellites. Therefore the visibility and the received power of GPS signals are totally different from those of the users near the Earth's surface. In this study, we analyzed the visibility of GPS signals received on GEO satellites. And we also developed a software GPS receiver that works on GEO satellites using CCMDB algorithm which is a weak signal receiver algorithm. GPS signals received on a GEO satellite are generated by a commercial hardware GPS simulator and used for the verification of the developed software GPS receiver. The mean 3D position and velocity error are calculated as 165.636 m and 0.5081 m/s.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.5
• /
• pp.2275-2293
• /
• 2020

This paper focuses on the simplified receiver design for multi-user circular block oversampled filter bank (CB-OSFB) uplink systems. Through application of discrete Fourier transform (DFT), the special banded structure and circular properties of the modulation matrix in the frequency domain of each user are derived. By exploiting the newly derived properties, a simplified zero-forcing (ZF) receiver is proposed for multi-user CB-OSFB uplink systems in the multipath channels. In the proposed receiver, the matrix inversion operation of the large dimension multi-user equivalent channel matrix is transformed into DFTs and smaller size matrix inversion operations. Simulation is given to show that the proposed ZF receiver can dramatically reduce the computational complexity while with almost the same symbol error rate as that of the traditional ZF receiver.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.826-832
• /
• 2015

In wireless networks, it is important to guarantee the energy efficiency and receiver fairness for satisfying service provider and customer at the same time. In this paper, we propose a resource allocation algorithm which improves energy efficiency as well as receiver fairness based on optimization techniques. In the proposed algorithm, subchannel and power are allocated to receivers iteratively in the consideration of channel state information, amount of dissipated power, and receiver rate, in order to improve energy efficiency and receiver fairness. Through simulation, we show the effectiveness and superiority of the proposed algorithm in terms of energy efficiency and receiver fairness.

• Journal of electromagnetic engineering and science
• /
• v.6 no.4
• /
• pp.229-234
• /
• 2006

This paper presents an advanced method of simulation for EM(electromagnetic) environment that affects on mobile receivers. A new calibration algorithm in the process of simulation is introduced. With a proposed calibration method, the time required for simulation is reduced and this makes it possible to simulate a near-real time EM environment in a shielded anechoic chamber. EM environment data acquisition and logging techniques with GPS for simulation were developed.