• Proceedings of the Korea Information Processing Society Conference
• /
• 한국정보처리학회 2009년도 추계학술발표대회
• /
• pp.555-556
• /
• 2009

본 논문에서는 Workflow Management System(이하 WMS)인 Kepler와 Pegasus를 정책 기반 자원 관리 시스템과 통합한 Hybrid Workflow 관리 시스템을 제안하고, 이를 통해 사용자의 서비스 수준 합의 (Service Level Agreement, SLA) 사항에 따라 서비스 요구 수준을 보장할 수 있는 Workflow 관리 시스템을 구현하여 성능 평가를 수행하였다.

• Journal of the Korean Ceramic Society
• /
• 제48권6호
• /
• pp.600-603
• /
• 2011

The microstructure of particle stabilized wet foams can be tailored by using parameters including the amphiphile concentration, contact angle, and surface tension. The influence of these parameters on the porosity is satisfactorily described in terms of a combined influence of the contact angle and surface tension of the initial suspensions that are directly affected by the amphiphile concentration. The resulting macroporous structures exhibited a total porosity of 82%. The foam cells were predominantly closed due to the air bubbles of the original wet foams being completely covered.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.23.1-23.1
• /
• 2007

• Bulletin of the Korean Chemical Society
• /
• 제20권8호
• /
• pp.875-878
• /
• 1999

A new concept ？？soft solution processing？？ has been introduced to fabricate advanced solid state materials in an economical, environmentally friendly, and energy and material efficient way. The prepared films show the desired and prospective properties despite of low temperature synthesis and no post-synthesis annealing. Successful examples demonstrate that soft solution processing is capable of preparing advanced materials with planned properties through the easy control of reaction conditions in a suitable aqueous solution in a single synthetic step without huge energy consumption and without any sophisticated equipment.

• Applied Chemistry for Engineering
• /
• 제26권3호
• /
• pp.270-274
• /
• 2015

We develop advanced oxidation processes for the treatment of spent electroless nickel plating solution. Apart form recovering nickel by leaching and enrichment, more emphasis is placed on rendering the waste water recyclable via oxidizing phosphite and hypophosphite into phosphate which can then be precipitated easily. $UV/H_2O_2$ process is employed and the conversion efficiency of COD and $PO_4-P$, and $H_2O_2$ consumption are analyzed. Furthermore, the $UV/H_2O_2/O_3$ process in conjunction with $O_3$ generator enables us to not only save the treatment time by 6 hours but also reduce $H_2O_2$ consumption by 30%.

• Korean Journal of Materials Research
• /
• 제26권5호
• /
• pp.266-270
• /
• 2016

Glass-ceramics were developed many years ago and have been applied in many fields such as electronics, chemistry, optics, etc. Much is already known about glass-ceramic technology, but many challenges in glass-ceramic research are still unresolved. Recently, large amounts of slag have steadily increased in the steel industry as by-products. To promote recycling of industrial waste, including steel industry slags, many studies have been performed on the fabrication of basalt-based high-strength glass-ceramics. In this study, we have fabricated such ceramics using various slags to replace high performance cast-basalt, which is currently imported. Glass-ceramic material was prepared in similar chemical compositions with commercial cast-basalt through a pyro process using slags and power plant by-product (Fe-Ni slag, converter slag, dephosphorization slag, Fly ash). The properties of the glass-ceramic material were characterized using DTA, XRD, and FE-SEM; measurements of compressive strength, Vicker's hardness, and abrasion were carefully performed. It is found that the prepared glass-ceramic material showed better performance than that of commercial cast-basalt.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권6호
• /
• pp.383-389
• /
• 2016

This paper presents a novel automatic white balance (AWB) algorithm for consumer imaging devices. While existing AWB methods require reference white patches to correct color, the proposed method performs the AWB function using only an input image in two steps: i) white point detection, and ii) color constancy gain computation. Based on the dark channel prior assumption, a white point or region can be accurately extracted, because the intensity of a sufficiently bright achromatic region is higher than that of other regions in all color channels. In order to finally correct the color, the proposed method computes color constancy gain values based on the Y component in the XYZ color space. Experimental results show that the proposed method gives better color-corrected images than recent existing methods. Moreover, the proposed method is suitable for real-time implementation, since it does not need a frame memory for iterative optimization. As a result, it can be applied to various consumer imaging devices, including mobile phone cameras, compact digital cameras, and computational cameras with coded color.

• Journal of the Korean Ceramic Society
• /
• 제48권5호
• /
• pp.463-466
• /
• 2011

Wet foams formed through direct foaming were stabilized using various concentrations of amiphiphilic particles that could control pore size and porosity. These porous materials showed moderate strength upon compression with high porosity. Bubble size and wet foam stability were tailored by amphiphile concentration, particle concentration, contact angle, and pH of the suspension to obtain crack-free porous solid after sintering. Closed and open pores were obtained with sizes of 30~300 ${\mu}m$ and porosities of over 80%.

• Journal of the Korean Magnetics Society
• /
• 제5권5호
• /
• pp.758-761
• /
• 1995

The magnetization of $Mn_{1-x}Co_{x}Pt_{3}$ ordered alloys was measured at various temperatures and the pressure effect on $T_{c}$ for X=0.25, 0.5 and 0.6 was examined. The X dependence of $T_{c}$ determined by Arott plot has a minimum near X=0.6. The field-cooling effect measurement for X=0.5 shows a reentrant spin glass behavior. It is found that there is a concentration showing no pressure dependence of $T_{c}$ between X=0.25 and 0.5. These magnetic properties are discussed with a rigid band model.

• Journal of the Korean Magnetics Society
• /
• 제5권5호
• /
• pp.362-365
• /
• 1995

The magnetic properties for $Fe_{24}Pt_{76}\;and\;Fe_{26}Pt_{74}$ have been investigated. The temperature vs. magnetic susceptibility curve for $Fe_{24}Pt_{76}$ had no peak near the Neel temperature. The magnetization proccess at 4.2 K showed only a linear variation up to the high magnetic field of 240 kOe. That for $Fe_{26}Pt_{74}$ at 77 K showed a metamagnetic transition at 100 kOe. These properties were discussed on the basis of a band picture.