• 한국기계가공학회지
• /
• 제10권1호
• /
• pp.23-30
• /
• 2011

This study is to analyze the internal flow at the inside of computer case which is commonly used. The inner configuration are modelled and simulation analysis is done by ANSYS-CFX. Dead volume is happened according to the positioning of VGA and HDD. The advanced model is suggested by removing this volume and making the smooth cooling flow. This model is formed with the constraint conditions same as the existing model. As compared with the existing model, flow configuration is different and the average temperature becomes lower through flow analysis about the advanced model.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(2)
• /
• pp.636-643
• /
• 1995

The accurate determination of the fuel-cladding gap conductance as functions of rod burnup and power level may be a key to the design and safety analysis of a reactor. The incorporation of a sophisticated gap conductance model into nuclear design code for computing thermal hydraulic feedback effect has not been implemented mainly because of computational inefficiency due to complicated behavior of gap conductance. To avoid the time-consuming iteration scheme, simplification of the gap conductance model is done for the current design model. The simplified model considers only the heat conductance contribution to the gap conductance. The simplification is made possible by direct consideration of the gas conductivity depending on the composition of constituent gases in the gap and the fuel-cladding gap size from computer simulation of representative power histories. The simplified gap conductance model is applied to the various fuel power histories and the predicted gap conductances are found to agree well with the results of the design model.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2000년도 추계학술대회 논문집
• /
• pp.174-179
• /
• 2000

Proposed in the paper is a V-FMS (Virtual Flexible Manufacturing System) model to be used as a prototyping tool for FMS design. The proposed V-FMS framework follows an object-oriented modeling (OOM) paradigm and is based on a set of user requirements for FMS prototyping. The V-FMS model consists of four types of object: virtual device, transfer handler, state manager and flow controller. A virtual device model, which corresponds to a static model in OOM, consists of two parts, shell and core, for reusability. A transfer handler corresponds to a functional model of OOM and it stores low level device commands required to perform job flow operations between giving and taking devices. The state manager and the flow controller constitute a dynamic model of OOM. The proposed V-FMS model has been implemented for a couple of linear type FMS-lines

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.501-509
• /
• 2019

In this paper a body-centered cubic(BCC) crystal plasticity model based on microscopic dislocation mechanism is introduced and numerically implemented. The model is coupled with irradiation effect via tracking dislocation loop evolution on each slip system. On the basis of the model, uniaxial tensile tests of unirradiated and irradiated RPV steel(take Chinese A508-3 as an example) at different temperatures are simulated, and the simulation results agree well with the experimental results. Furthermore, crystal plasticity damage is introduced into the model. Then the damage behavior before and after irradiation is studied using the model. The results indicate that the model is an effective tool to study the effect of irradiation and temperature on the mechanical properties and damage behavior.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2306-2313
• /
• 2010

This paper describes a model based fault detection algorithm for an Advanced ESC System which consists of Hydraulic Control Unit (HCU) with built-in wheel pressure sensors. Advanced ESC System can be used for various value-added functions such as Stop & Go Function and Regenerative Brake Function. Therefore, HCU must have a reliable fault detection. Due to the huge amount of sensor signals, existing specific sensor based fault detection of HCU cannot guarantee the safety of vehicle. However, proposed algorithm dose not require the sensors. When model based fault detection algorithm detects severe failures of the HCU, it warns the driver in advance to prevent accidents due to the failures. For this purpose, a mathematical model is developed and validated in comparison to actual data. Simulation results and data acquired from an actual system are compared with each other to obtain the information needed for the fault detection process.

• Steel and Composite Structures
• /
• 제17권6호
• /
• pp.835-850
• /
• 2014

The fire resistance of composite steel and concrete structures may be determined by using the simplified methods provided in EN 1994-1-2. For the particular situations not covered by the standard, an advanced calculation model might be applied, using special purpose programs for the analysis of structures in fire. The validation of these programs has always been an important issue for software developers, but also for designers and authorities. Clause 4.4.4 from EN 1994-1-2 refers to the validation of the advanced calculation models and states that these models must be validated through relevant test results. The paper presents the calculation of fire resistance of the composite columns in a high-rise building built in Romania, and focusses on the validation of the calculation model (computer program SAFIR), for this particular case. This validation, asked by the Romanian authorities, considers the available experimental results of a fire test, performed on a similar composite steel-concrete column.

• Journal of Magnetics
• /
• 제6권3호
• /
• pp.101-107
• /
• 2001

A model to describe the effect of stator slotting in the airgap region of a linear brushless permanent magnet motor (LBLPMM) is proposed for analytical prediction of magnetic field distribution. It is a two-dimensional model based on superposition of the effect of stator slotting and main field due to permanent magnet (PM) without stator slotting. The effect of stator slotting is expressed in form of a generalized equation, which is obtained by numerical analysis and is a function of motor geometric parameters, so the proposed model effectively accounts for the effect of stator slotting in the airgap field distribution according to change of motor geometry or relative motion of stator and armature. Results of prediction from the proposed model are compared with corresponding finite element analysis.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권3호
• /
• pp.237-244
• /
• 2013

A continuous, explicit drain-current equation for short-channel double-gate (DG) MOSFETs has been derived based on the explicit surface potential equation. The model is physically derived from Poisson's equation in each region of operation and adopted in the unified regional approach. The proposed model has been verified with numerical solutions, physically scalable with channel length and gate/oxide materials as well as oxide/channel thicknesses.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2007년도 High Temperature Superconductivity Vol.XVII
• /
• pp.4-4
• /
• 2007

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.957-960
• /
• 2000

A novel extraction method of high frequency small-signal model parameters for MOSFETS is proposed. From S-parameter measurement, this technique accurately extracts the model parameters including the charge conservation capacitance parameters. To consider charge conservation, nonreciprocal capacitance is considered. The modeled parameters fit the measurements very well without any optimization.