• Industrial Engineering and Management Systems
• /
• 제11권4호
• /
• pp.310-330
• /
• 2012

Scheduling is an important tool for a manufacturing system, where it can have a major impact on the productivity of a production process. In manufacturing systems, the purpose of scheduling is to minimize the production time and costs, by assigning a production facility when to make, with which staff, and on which equipment. Production scheduling aims to maximize the efficiency of the operation and reduce the costs. In order to find an optimal solution to manufacturing scheduling problems, it attempts to solve complex combinatorial optimization problems. Unfortunately, most of them fall into the class of NP-hard combinatorial problems. Genetic algorithm (GA) is one of the generic population-based metaheuristic optimization algorithms and the best one for finding a satisfactory solution in an acceptable time for the NP-hard scheduling problems. GA is the most popular type of evolutionary algorithm. In this survey paper, we address firstly multiobjective hybrid GA combined with adaptive fuzzy logic controller which gives fitness assignment mechanism and performance measures for solving multiple objective optimization problems, and four crucial issues in the manufacturing scheduling including a mathematical model, GA-based solution method and case study in flexible job-shop scheduling problem (fJSP), automatic guided vehicle (AGV) dispatching models in flexible manufacturing system (FMS) combined with priority-based GA, recent advanced planning and scheduling (APS) models and integrated systems for manufacturing.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.177-180
• /
• 1999

Nowadays, one of the major technical issues in manufacturing is to create an environment to promote collaboration among diverse engineering activities. Collaborative engineering is an innovative approach integrating widely distributed engineering activities through promoting information sharing and actual collaboration. It requires close interactions among developers, suppliers and customers, and consideration of entire product life cycle from concept to disposal. A carefully-designed operating system is crucial for successful collaboration of many different activities in a Networked Virtual Manufacturing System(NVMS). High extensibility, flexibility and efficiency ale the key characteristics requested of an operating system to handle the complexity of the NVMSs. In this paper, we propose a model of the operating system for collaborative engineering using concurrent quasi-procedural method(QPM). QPM is a goal-driven data management technique for distributed and parallel computing environments. It is to be applied to the evaluation of activities to be executed, validities of input data, execution path of activities for a needed output, and expected to greatly improve the productivity of operations by preventing redundant evaluations. Collaboration among many different engineering activities in NVMSs is to be performed by the network of agents that encapsulate the capabilities of both users and their tools.

• Current Optics and Photonics
• /
• 제1권4호
• /
• pp.364-371
• /
• 2017

Compared to one made of glass, an aluminum mirror features light weight, compact design, low cost, and quick manufacturing. Reflective mirrors and supporting structures can be made from the same material, to improve the athermal performance of the system. With the rapid development of ultraprecise machining technologies, the field of applications for aluminum mirrors has been developed rapidly. However, most of them are rotationally symmetric in shape, and are used for infrared applications. In this paper, the design and manufacture of an off-axis aluminum mirror used for a three-mirror-anastigmat (TMA) optical system at visible wavelengths is presented. An optimized, lightweight design provides a weight reduction of more than 40%, while the surface deformation caused by earth's gravity can meet the required tolerance. The two pieces of an off-axis mirror can be diamond-turned simultaneously in one setup. The centrifugal deformation of the off-axis mirror during single-point diamond turning (SPDT) is simulated through the finite-element method (FEM). The techniques used to overcome centrifugal deformation are thoroughly described in this paper, and the surface error is reduced to about 1% of the original value. After post-polishing, the form error is $1/30{\lambda}$ RMS and the surface roughness is better than 5 nm Ra, which can meet the requirements for visible-light imaging.

• 한국레이저가공학회지
• /
• 제15권4호
• /
• pp.12-15
• /
• 2012

On behalf of the existing semiconductor process, the electronic devices to low-cost mass production to mass print the way, the research for development of roll-to-roll printing process is actively underway. This study was performed in about the research on the manufacturing technology of the printing roll used in the printing process of electronic devices. The indirect laser imprinting technology was used to create printable roll, and after coating copper on the surface of steel and thereon after coating polymer, after removing the polymer on the surface of roll, the printable roll was made. The laser system and roll feeder system were constructed and control program was developed. We has found the optimal conditions to perform laser patterning experiments using a system developed and We can make the minimum line width of 18 ${\mu}m$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2007년도 제32회 학술대회 초록집
• /
• pp.104-104
• /
• 2007

• 연구논문집
• /
• 통권26호
• /
• pp.57-68
• /
• 1996

Recently, a lot of researches on material handling system are actively studied for realization of FA(Factory Automation), FMS(Flexible Manufacturing System) and CIM(Computer Integrated Manufacturing). Management and application of material handling system are precondition technologies playing an important part in integration of production system including manufacturing. assemhly, and inspection cell. In this paper, the general situation of automation technology is investigated and technology level is analyzed in comparision with an advanced country. And the operation trend and part of material handling system including AS/RS, AGV, and Conveyor, are studied. And also technologies related to material handling system in the inside and outside of the country are studied.

• 융복합기술연구소 논문집
• /
• 제5권1호
• /
• pp.33-36
• /
• 2015

In recent years, developed and developing country such as U.S., Japan, and China push forward to enhance their manufacturing industry through national policies such as advanced manufacturing(U.S.), Industrie 4.0 (Germany), and Made in China 2025. Also, in Korea, Ministry of Trade, Industry, and Energy(MOTIE) claimed Manufacturing3.0 for encouraging domestic manufacturing industry. Manufacturing industry plays an important role in encouraging economy and employment. In this paper, we survey, analyze and summarize the current national policy for enhancing manufacturing industry.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2007년도 제32회 학술대회 초록집
• /
• pp.122-122
• /
• 2007

• 한국기계가공학회지
• /
• 제13권3호
• /
• pp.22-27
• /
• 2014

Nanosized zeolite was prepared in an autoclave at a hydrothermal temperature range of 100 to $170^{\circ}C$. In TEM and particle-size analyses, the size of the nanosized powders was found to be 10-300 nm, and its distribution is uniform and spherical, depending on the hydrothermal temperature. XRD confirms that the nanosized powder is MFI zeolite.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.3-8
• /
• 2006

The application of three-dimensional (3-D) CAD has been popularized for design and production and digital manufacturing has been spreading in many industrial fields. By simulation of the production process using 3-D digital models, which are the core of CIM (Computer Integrated Manufacturing) system, the efficiency and safety of production are improved at each stage of work, and optimization of manufacturing can be achieved. This paper firstly describes the concept of "simulation based production" in shipbuilding and also digital manufacturing; the 3-D CAD system is indispensable for effective simulation because ship structure is three dimensionally complex. By simulation, "computer optimized manufacturing" can be possible. The most effective fields of simulation in shipbuilding are in jobs where many parties have to cooperate, while existing two-dimensional drawings are hardly observed the whole structures due to interference between structures or equipment of complex shape. In this paper some examples of the successful application in IHIMU (IHI Marine United Inc.) are shown: assembly of a pipe unit, erection of a complex hull block, carriage of equipment, installation of a propeller, and access in an engine room.