• Journal of Electrochemical Science and Technology
• /
• 제7권1호
• /
• pp.1-12
• /
• 2016

The production of oxygen and hydrogen from solar water splitting has been considered to be an ultimate solution for energy and environmental issues, and over the past few years, nano-sized semiconducting metal oxides alone and with graphene have been shown to have great promise for use in photocatalytic water splitting. It is challenging to find ideal materials for photoelectrochemical water splitting, and these have limited commercial applicability due to critical factors, including their physico-chemical properties, the rate of charge-carrier recombination and limited light absorption. This review article discusses these main features, and recent research progress and major factors affect the performance of the water splitting reaction. The mechanism behind these interactions in transition metal oxides and graphene based nano-structured semiconductors upon illumination has been discussed in detail, and such characteristics are relevant to the design of materials with a superior photocatalytic response towards UV and visible light.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.285-288
• /
• 2007

In the recent years the using of low-density material such as high-strength Al alloy on the various industries is becoming light-weight. High strength and hollow Al alloy is good material for stiffness and recycling. Therefore the advanced manufacturing technology with Al alloy is continuously required in many industrial fields. In this study simplified hallow rectangular section of Al alloy is analyzed by FE analysis. Bending stress is affected punching and rotating of wing-die. The analysis of press bending is preformed at first. The elastic recovery value of component and stress distribution acting from the result of the bending angle of three types were obtained. The designed precesses were analyzed by the commercial FE code, Deform-3D. Forming dies for each process were designed and prototypes were manufactured by the verified forming process. Some of the important features of design parameters in the press bending were reviewed.

• 전기학회논문지
• /
• 제64권3호
• /
• pp.473-479
• /
• 2015

Thermal relays are sometimes used instead of long time overcurrent relays for motor protection. But, it is difficult for any relay design engineer to adequately approximate motor heating curves which represent the average of a difficult-to-define thermal zone. Thermal relays frequently may not provide sufficient protection on heavy overloads. Digital multifunction relays are microprocessor-based devices. These relays offer highly reliable and advanced protection of motors. If a situation can be mathematically described, the microprocessor in a digital relay can be programmed to tackle that problem. Today's motor protection is accomplished with digital protective relays. Digital relays offer additional, highly important features to complement protection. The best way to prevent short in motor is to not overheat and degrade the insulation.

• 복식
• /
• 제58권9호
• /
• pp.1-17
• /
• 2008

One of features of fashion in Joseon period is culture of overlapping of several clothes. This culture appeared with Hapbong(合縫:sewing of several clothes as one) at late Joseon period and developed into simpler and more practical fashion culture. Hapbong is mainly identified at men's official uniform such as Jaebok(祭服), Jobok(朝服), Kwanbok(官福), Gugunbok(具軍服), and women's formal dress such as Wonsam(圓衫) and Dangeui(唐衣) which formed several clothes get to be a set. Such fashion was designed to maintain dignity and power while simple to wear. And It has the trace of overlapping visually on the collar, sleeve, breast-tie and others. Hapbong is attributable to thoughts of practical science, post-toadyism, modernization, renovated the system of clothing, and advanced sewing technique.

• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.141-147
• /
• 2017

Mechanical shim is an advanced technology for reactor power and axial offset control with control rod assemblies. To address the adverse accuracy impact on the ex-core power range neutron flux measurements-based axial offset control resulting from the variable positions of control rod assemblies, the lead-lag-compensated in-core self-powered vanadium detector signals are utilized. The prompt ${\gamma}$ current of self-powered detector is ignored normally due to its weakness compared with the delayed ${\beta}$ current, although it promptly reflects the flux change of the core. Based on the features of the prompt ${\gamma}$ current, a method for configuration of the lead-lag dynamic compensator is proposed. The simulations indicate that the method can improve dynamic response significantly with negligible adverse effects on the steady response. The robustness of the design implies that the method is of great value for engineering applications.

• Journal of information and communication convergence engineering
• /
• 제5권1호
• /
• pp.7-11
• /
• 2007

The aim of this paper is to design and implement a new ECG signal monitoring and analysis method for the home care of elderly persons or patients, using wireless sensor network (WSN) technology. The wireless technology for home-care purpose gives new possibilities for monitoring of vital parameter with wearable biomedical sensors and will give the patient freedom to be mobile and still be under continuously monitoring. Developed platform for portable real-time analysis of ECG signals can be used as an advanced diagnosis and alarming system. The ECG features are used to detect life-threatening arrhythmias, with an emphasis on the software for analyzing the P-wave, QRS complex, and T-wave in ECG signals at server after receiving data from base station. Based on abnormal ECG activity, the server transfer diagnostic results and alarm conditions to a doctor's PDA. Doctor can diagnose the patients who have survived from arrhythmia diseases.

• 한국컴퓨터정보학회논문지
• /
• 제24권9호
• /
• pp.69-75
• /
• 2019

We propose a method to analyze user requirements to design a virtual reality-based risk management system. This paper presents surveys, interviews, prototype evaluation methods, and implementation process. Architectural heritage is easily exposed to natural and artificial dangers caused by various material combinations and structural features. So, risk management of cultural heritage plays a key role in preserving and managing cultural heritage. However, risk management has been carried out through empirical methods using distributed data. This study analyzes user requirements for designing functions and interfaces of VR-based risk management system and evaluates prototypes to overcome the above problems. As a result, most heritage managers wanted a system function to support risk analysis and response. They also found that they prefer 2D information such as existing drawings and photos rather than 3D information. The results of the user requirements analysis derived from this study will be used to create risk management applications.

• International journal of advanced smart convergence
• /
• 제9권4호
• /
• pp.101-105
• /
• 2020

In this study, we are going to discuss the role of sound, which exists as the background of a movie scene, and the relationship between seeing and hearing. In order to analyze the form in which the scene and sound are matched, the visual content of the image must be analyzed first. In this study, we analyzed Stanley Kubrick's film . Generally, there are both visual and auditory features in the scene of the movie. In some cases, the sound is emphasized more than the scene, and the scene is emphasized more than the sound. In particular, the sound in movies enables a wider imagination and a three-dimensional experience. Images and sounds will have different meanings and effects depending on the purpose of use. By analyzing the correlation between visual scene and auditory sound based on the role sound plays in the film in this study, we would like to confirm that sound is one essential element that has the role of equivalent and independent expression, not the role of assisting images.

• International Journal of Advanced Culture Technology
• /
• 제11권1호
• /
• pp.18-26
• /
• 2023

The use of holographic standardized patient (HSP) with mixed reality can provide students with the opportunity to enhance clinical reasoning skills. This is still relatively new, so there is a lack of guidelines for educators. Thus, we aimed to develop the instructional model of HSP-based education, for enhancing clinical reasoning skills in undergraduate healthcare education, which could systematically guide educators in designing and implementing HSP-based teaching and learning activities appropriately. Using a design and development research, a theoretically constructed initial mode in this study was iteratively improved and underwent validation through expert review and model usability test. Features of the model were discussed, along with theoretical and practical implications and suggestions for further research.

• Journal of Electrical Engineering and Technology
• /
• 제7권2호
• /
• pp.178-183
• /
• 2012

The design of the integrated quench protection (QP) system for the high current superconducting magnet (SCM) has been fabricated and tested for the toroidal field (TF) coil system of the Korea Superconducting Tokamak Advanced Research (KSTAR) device. The QP system is capable of protecting the TF SCM, which consists of 16 identical coils serially connected with a stored energy of 495 MJ at the design operation level at 35.2 kA per turn. Given that the power supply for the TF coils can only ramp up and maintain the coil current, the design of the QP system includes two features. The first is a basic fast discharge function to protect the TF SCM by a dump resistor circuit with a 7 s time constant in case of coil quench event. The second is a slow discharge function with a time constant of 360 s for a daily TF discharge or for a stop demand from the tokamak control system. The QP system has been successfully tested up to 40 kA with a short circuit and up to 34 kA with TF SCM in the second campaign of KSTAR. This paper describes the characteristics of the TF QP systems and test results of the plasma experiment of KSTAR in 2009.