• 자원리싸이클링
• /
• 제27권1호
• /
• pp.3-13
• /
• 2018

3D 적층가공(3D Additive manufacturing, AM) 기술은 기존산업의 패러다임을 혁신하는 새로운 비즈니스 모델로 자리매김하고 있다. 2000년대 초 선보인 건축용 3D 프린팅(3D printed building) 기술 또한 미국과 유럽을 중심으로 기계/전자 기술과 연계하여 빠르게 발전하고 있다. 그러나 건축용 3D 프린터 시스템의 경우 기존 전통적인 건설공법에 사용되는 시멘트/콘크리트 원료 제품과는 다른 기계적 특성을 요구한다. 이에 따라 시멘트 산업과 자원리사이클링 산업에서 생산되는 소재원료의 활용도를 높이기 위해서는 건축용 3D 프린팅 기술의 특성을 반영하기 위한 소재가공 및 활용기술 개발, 새로운 물성평가 및 테스트 방법의 확보, 환경적 안정성과 관련된 장기간의 데이터베이스 확보가 필요하다.

• Nuclear Engineering and Technology
• /
• 제40권7호
• /
• pp.561-570
• /
• 2008

When reactivity insertion such as refueling occurs in CANDU reactors, the power and the water levels are tilted in the upper outer zone of the LZCS (Liquid Zone Control System) and fluctuate unstably for a certain period of time (1-5 days). The instability described above is observed in most CANDU reactors in service around the world, but its root cause is unidentified and no solutions to this problem have been established. Therefore, this study attempted to prove experimentally and analytically that the root cause lies in the hold-up of light water on the top of the TSP (Tube Support Plate) due to the mismatch between net volumetric flow rate of light water and helium crossing the narrowed porous TSP installed within the LZCS compartment. Our method was to perform a hydrodynamic simulation of in/outflow of light water and helium. Two solutions for the aforementioned instability of LZCS are suggested. One is to regulate the compartment for both inflowing helium gas and outflowing light water; the other is to enlarge the flow paths of helium and light water within TSP. The former may be applicable to nuclear reactors in service and the latter to those planned for construction.

• 한국도로학회논문집
• /
• 제16권3호
• /
• pp.1-8
• /
• 2014

PURPOSES : The purpose of this paper is to demonstrate to the practicing engineers, how to apply the advanced composite materials theory to the road structures. For general construction material used, there is certain theoretical limit in sizes. For super road structure construction, the reduction in panel weight is the first step to take in order to break such size limits. METHODS : For a typical road structures panel, both concrete and advanced composite sandwich panels are considered. The concrete panel is treated as a special orthotropic plate. RESULTS : All types of advanced composite sandwich panels are considered as a self-weights less than one tenth of that of concrete panel. The concrete panel is treated as a special orthotropic plate to obtain more accurate result. CONCLUSIONS : Advanced composite sandwich panels are considered as a self-weights less than one tenth (10%) of that of concrete panel, with deflections less than that of the concrete panel. This conclusion gives good guide line for design of the light weight of road structures.

• 기술혁신연구
• /
• 제2권1호
• /
• pp.170-190
• /
• 1994

The importantce of a development of competitiveness in domestic construction industry is growing as some of domestic construction markets is scheduled to open to foreign competing firms with higher level of construction technology and management. A national level of competitiveness in domestic construction industry and firms are partially, but significantly, affected by a technology level and a characteristics of production pattern. The purpose of the study is mainly to analyze and identify a technology level, production pattern and a development stage of R&D activities of domestic construction industry and firms. Based on these findings the study draws on a concluding remarks and derives technology policy implications. Results of analysis in the study impliy that (1) competitiveness of domestic construction firms(industry) in terms of technology level is relatively weak as compare to that of advanced foreign competing firms, (2) degrees of substitution of capital for labor are seemed to be relatively high, (3) R&D (investment) activities of domestic construction firms are generally spread out in forms of import, adjustment and betterment, and (4) only a small number of big domestic construction firms are seemed to afford to R&D investment for research facilities and equipments, but not enough for higher level of R&D man-power. The study suggests that technology policy for construction industry should be based on a fundamental policy directions. For example the increase in size and heightened quality level of R&D man-power should be placed in a top priority in policy agenda. Sound and specific policy items should be developed for planning and design, and maintenace and inspection technology in order to lead domestic industry to compete with foreign firms with full strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.46-47
• /
• 2020

Now a days, Lots of research about 4th industrial revolution are progressing. Attempt of technologies on construction engineering field, such as construction management by drone, building equipments based on the IoT technology and etc., are continuously tried by government and private enterprises. Meanwhile, the application of advanced technologies on the military facilities should be reviewed cautiously, because of the national defense environment such as military security. Therefore, this study aim to understanding of present status of military facilities for introduction of 4th industrial revolution technology. To achieve the aim of the study, question investigation targeting working groups for military facility management is conducted.

• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3675-3678
• /
• 2014

• 대한안전경영과학회지
• /
• 제18권4호
• /
• pp.47-55
• /
• 2016

Recently, industrial accidents rate has been gradually decreasing due to the development of safety management methods, but until now, the accident rate in the construction sector is higher than other industries. Large-scale construction sites are operating systematic safety systems to reduce industrial accidents. However, small and medium sized construction sites do not have systematic safety system and lack safety management ability, so that disaster is not reduced compared with large scale construction site. As a result, disaster prevention technology instruction system has been implemented to reduce the disasters of small and medium scale construction sites. However, in the case of a small construction site less than 2 billion won, there is little decrease in the accident rate, and in some cases, the accident rate increases. After the technical guidance system has been implemented, it is necessary to identify the performance and problems of implementation and to improve its effectiveness. In this study, we suggest the improvement plan to improve the efficiency of the technical guidance system by analyzing the problems and actual conditions of technical guidance operation in small and medium sized construction work sites.

• KIEAE Journal
• /
• 제13권6호
• /
• pp.121-128
• /
• 2013

This study attempted to explore the MC design methods of modular construction using discontinuous double module grids and further, the design methods of walls. Modular construction is generally characterized with multiple units called modules with a module dimension of 3M(300mm) appearing in the form of double grids. The discontinuous double grids including correction values and gap values occurs inevitably in the modular construction where units are joined horizontally. Therefore, it is desirable to carry out the MC design taking into account these discontinuous double grids. In this study, the MC design was applied to the plane of wooden houses in modular construction, going through a process of setting the size of pillars and inside dimensions, of determining the dimension of discontinuous double grids that occur during the assembly of units, and of setting the dimension of outer walls in conjunction with the derived dimensions. The dimension of outer walls was applied differently depending on the range of regional use by analyzing the energy performance with the materials used. Consequently, the materials and components of factory-produced buildings can be used directly without processing, and the suitability of the outer wall design can be pre-determined by previewing the calculation of the cross-sectional configuration and heat transmission coefficients of outer walls in modular construction, allowing to be used as a decision-making tool of design.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.249-258
• /
• 2007

Recently orders of projects in the field of oil and gas plants have increased due to rising oil prices and consumption. The markets of oil and gas plants are expanding into the Middle East area and all over the world. Because the oil and gas markets have a lot of overseas construction operations, competition among advanced companies is more important. However, companies in the period of growth have not had enough competitive powers of license in the design phase. Therefore, they are faced with difficulty of adopting the technology which is maximizing the effect of investments, and scheduling of a long-range plan. In order to achieve adequate technology management and competitive power, this study considers a long-range plan through an analysis of an appropriate introduction and the strategic planning process of technology management.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.343-344
• /
• 2023

In order to expand its entry into not only the domestic construction market but also overseas global markets, it is necessary to secure technological competitiveness, and as a fundamental measure, it is necessary to increase the proportion of R&D investment and establish and revitalize R&D organizations. Therefore, the purpose of this study is to analyze construction sales and construction R&D investment for global construction companies in Korea and Japan, derive implications, and provide basic data for government policy establishment and global construction company strategy establishment. As a result of analyzing R&D investments in construction companies in Korea and Japan, it can be seen that Japanese construction companies have higher R&D investment costs compared to sales compared to Korea. In particular, the proportion of R&D investment continues to increase year-on-year, strengthening global competitiveness due to technology development. In addition, Japanese construction companies have established a technology research institute to discover and conduct future R&D research such as advanced IT, disaster prevention, and environment.