• 한국환경과학회지
• /
• 제11권3호
• /
• pp.227-234
• /
• 2002

Laboratory experiments were conducted to examine the behavior of metalaxyl in environment which was used as pesticide in green soil of golf course and as functions of the characteristics of adsorption, desorption and degradation in soil texture and organic matter contents. Acid water containing metalaxyl was conducted to evaluate the effects on adsorption, desorption and degradation. The adsorption of metalaxyl played more significant role in organic contents than clay contents, and pH Increases more pH 2.5 than pH 5.6. The desorption of metalaxyl from contaminants soil decreased higher organic contents LS-soil than S-soil, but the desorption amount of metalaxyl increased more pH 5.6 than pH 2.5. The rate of degradation of metalaxyl in green soil environmental increased higher organic contents LS-soil than S-soil and decreased more pH 2.5 than pH 5.6. These results indicated that the behavior of metalaxyl of the green soil was affected the soil texture of the golf course. Increasing of organic contents, the adsorption amount of metalaxyl on soil increased. Moreover the decrease of the pH of solution increased adsorption amounts and decreased desorption amounts. As the results, the transportation of metalaxyl in soil decreased the acidic rates. The acidification of soil by the acid rain increased the adsorption amount of metalaxyl, but the degradation of metalaxyl decreased. Therefore, it is possible to sustain contamination in run-off the stream and ground water by residuals in soil.

• 한국토양환경학회지
• /
• 제2권2호
• /
• pp.61-72
• /
• 1997

본 연구에서는 산과 계곡에 폐기물로 방치되어 있는 석탄폐석의 재활용 및 자원화의 측면에서 수처리에 이용될 수 있는 흡착제의 개발을 위한 기초실험이 수행되었다. 석탄폐석으로는 굴진폐석과 선탄폐석이 이용되었으며, 석탄폐석 자체가 지니고 있는 흡착능 실험과 열처리로 인한 흡착능 개선 여부를 검토하였다. 처리 대상물질은 중금속, 색도, 그리고 COD등을 선정하였다. 실험조건은 회분식과 컬럼식으로 구분하여 각각 이루어졌으며, 실험결과 다음과 같은 결론을 얻을 수 있었다. 1) 천연상태의 석탄폐석은 약 20~30%의 중금속 흡착능을 지니고 있는 것으로 나타났으며, 탄화 공정인 간단한 열처리만으로도 약 2~5배의 흡착능 향상이 이루어졌다. 2)석탄폐석의 열처리 조건 변화에 따른 중금속 흡착능을 비교한 결과, 50$0^{\circ}C$에서 6시간 반응시킨 것이 가장 우수하였다. 3)칼럼실험에 있어 기존의 입상활성탄 보다 처리효율이 저조하나 석탄폐석은 무가공 상태로도 약 20~60%의 COD 및 색도를 제거할 수 있었다. 4) $500^{\circ}C$, 에서 6시간 열처리된 폐석의 컬럼실험에서 생물학적 유출수의 색도 제거에 우수함을 알 수 있었으며, 중금속 및 COD제거에 있어서는 여과 속도에 따라 많은 차이를 보였다. 따라서 석탄폐석을 흡착제로의 활용이 가능할 것으로 판단되며, 본 연구 이외에 활성화 공정을 적용할 경우 흡착정도는 더 향상 될 것으로 판단된다.

• 한국토양환경학회지
• /
• 제5권3호
• /
• pp.17-23
• /
• 2001

토양중 pendimethalin의 흡착과 이동특성을 파악하기 위하여 사양토, 미사질토 및 양토를 대상으로 회분식 및 칼럼식 실험을 통하여 얻어진 결과는 다음과 같다. Pendimethalin은 진탕 6시간에서 사양토의 경우 59.6%, 미사질토의 경우 77.3%, 양토의 경우 64.0%가 흡착되어 평형흡착에 근접하는 경향을 나타냈으며, 흡착등온식은 Freundlich식에 잘 일치하였으나, Langmuir식에는 적합하지 않았다. 사양토, 미사질토 및 양토에 대한 pendimethalin의 흡착계수는 각각 8.0, 16.1, 9.5로 나타났다. 흡착칼럼 배출구에서 pendimethalin이 처음 검출된 시간 및 유출량은 사양토의 경우 112min. 700ml, 미사질토의 경우 630min, 2100m1, 양토의 경우 189min, 900ml이었다. 0.05Co를 파과점으로 할 경우 각 토양의 파과점에 도달되는 시간은 각각 256min, 810min, 420min이었다.

• 한국염색가공학회지
• /
• 제3권1호
• /
• pp.1-7
• /
• 1991

The influences, that various mercerization conditions had on the dying property of cotton fiber, were studied. Crystallization degrees accompained by lattice transformation of slack-mercerized cotton by IR spectroscopic analysis and morphology of the slack-merceized cotton by SEM were observed in this research. The above results were as follows; 1. Equilibrium dye adsorption rates of slack-mercerized cotton with C. I. Reactive Blue 19 were gained in the case of 8M NaOH, $10^{\circ}C$, 20 min., about 2 times as large as the rates of untreated cotton and gained about 2.5 times in the case of 8M $NH_3$, $10^{\circ}C$, , 20 min. 2. Equilibrium dye adsorption rates of slack-mercerized cotton with C. I. Reactive Blue 2 were gained in the case of 2M NaOH, $10^{\circ}C$, 20 min., about 1.7 times as large as the rates of untreated cotton and gained about 2.4 times in the case of 8M $NH_3$, $10^{\circ}C$, 20 min. 3. It was confirmed by SEM that untreated cotton fibrils are formed in the shape of screw and treated cotton is rearranged in the direction of fiber axis.

• Transactions on Electrical and Electronic Materials
• /
• 제7권3호
• /
• pp.112-117
• /
• 2006

In this paper we present that the effects of polymer adsorption on stabilities and CMP performance of ceria abrasive particles. Characterization of ceria abrasive particles in the presence of poly(vinyl pyrrolidone) (PVP) was performed by the measurements of adsorbed amounts of PVP, average sizes, and the back scattering intensities of the ceria abrasive particles as functions of PVP molecular weight and PVP concentration. The ceria abrasive particles in the presence of PVP were used to polish $SiO_2\;and\;Si_3N_4$ films deposited on Si wafers in order to understand the effect of PVP adsorption on chemical mechanical polishing (CMP) performance, together with ceria abrasive particles without PVP. Adsorption of PVP on the ceria abrasive particles enhanced the stability of ceria abrasive particles due to steric stabilization of the thick adsorbed layer of PVP. Removal rates of the deposited $SiO_2\;and\;Si_3N_4$ films by the ceria abrasive particles in the presence of PVP were much lower than those in the absence of PVP and their magnitudes were decreased with an increase in the concentration of free PVP chains in the dispersion media. This suggests that the CMP performance in the presence of PVP could be mainly controlled by the hydrodynamic interactions between the adsorbed PVP chains and the free ones. Moreover, the molecular weight dependence of PVP on the removal rates of the deposited films was hardly observed. On the other hand, high removal rate selectivity between the deposited films in the presence of PVP was not observed.

• 한국환경과학회지
• /
• 제24권2호
• /
• pp.151-162
• /
• 2015

The adsorption characteristics of Sr ions and Cs ions in single and binary solution by zeolite A were investigated in batch experiment. The adsorption rate of Sr ions and Cs ions by zeolite A obeyed pseudo-second-order kinetic model in single and binary solution. The initial adsorption rates (h) and adsorption capacities of both ions obtained from pseudo-second-order kinetic model, and the values were decreased with increasing concentration of the competitive ions (0~1.5 mM). Also, adsorption isotherm data in binary solution were well fitted to the extended Langmuir model, the maximum adsorption capacities of Sr and Cs calculated from the model were 1.78 mmol/g and 1.64 mmol/g, respectively. The adsorption of Sr and Cs ions by zeolite A was carried out in the presence of other cations such as $Na^+$, $K^+$, $Mg^{2+}$ and $Ca^{2+}$. The results showed that the zeolite A can maintain a relatively high adsorption capacity for Sr and Cs ions and exhibits a high selectivity in the presence of competitive cations. The effect of competition had an order of $Ca^{2+}$ > $K^+$ > $Mg^{2+}$ > $Na^+$ for Sr ions and $K^+$ > $Ca^{2+}$ > $Na^+$ > $Mg^{2+}$ for Cs ions at the same cation concentration.

• 설비공학논문집
• /
• 제17권8호
• /
• pp.746-753
• /
• 2005

Adsorption chillers have been receiving considerable attentions as they are energy-saving and environmentally benign systems. In order to evaluate adsorption rates, experiments were performed in the batch type adsorption apparatus. Three types of silica gels were investigated under an assortment of experimental conditions that are representatives of the actual operating environments in the adsorber of adsorption chillers. Experimental results revealed the effects of silica gel particle size, bed temperature, and fin pitch of fin tube on the adsorption rate. The $0.25\~1.18mm$ particle size of silica gel with high adsorption rate was selected as a suitable adsorbent. The measured adsorption rate became bigger with decreasing particle size. From the comparison of adsorption rate, it is found that the fin tube has about $21\%$ higher value than that of the bare tube. The effect of heat and mass flux is found to be more significant in the fin tube than in the bare tube.

• Environmental Engineering Research
• /
• 제23권3호
• /
• pp.330-338
• /
• 2018

This study investigated the possibility of using potassium titanate oxide ($K_2Ti_4O_9$) and acrylic acid-grafted polypropylene fabric (PP-g-AA) as adsorbents capable of removing strontium from aqueous solutions. $K_2Ti_4O_9$ showed the highest rate of strontium removal in the weak alkaline range, while the PP-g-AA increased strontium removal in the neutral range. Moreover, the adsorption capacity of the $K_2Ti_4O_9$ was not affected by the coexistence of K and Na ions, while the adsorption capacity decreased when Ca and Mg ions were present at the same concentration as that of strontium. When coexisted at the same concentration as strontium, Na, K, Ca, and Mg ions strongly reduced the adsorption capacity of the PP-g-AA. The results also indicated that the adsorption of strontium on $K_2Ti_4O_9$ was consistent with both the Langmuir and Freundlich adsorption isotherms. In contrast, the adsorption of strontium on the PP-g-AA was more consistent with the Langmuir isotherm model. Moreover, the adsorption equilibrium time of $K_2Ti_4O_9$ was generally 12 h, while that of the PP-g-AA was 5 h, indicating that the adsorption rates were consistent with the pseudo-second order kinetics model. $K_2Ti_4O_9$ and the PP-g-AA could be regenerated by simple washing with 0.5 N HCl.

• Tribology and Lubricants
• /
• 제17권3호
• /
• pp.171-178
• /
• 2001

In order to elucidate the lubricating mechanism of polyolester base oils [POEs], the wear characteristics of 27 kinds of polyolester base oils including mixed POEs were investigated. Their wear results were discussed in terms of the effect of molecular structure on wear performance and compared with those of mineral oil. In addition, the adsorption ability of POEs to reduced iron and their hydrolysis rates were measured and the effect of their molecular structures on the adsorptivity and hydrolysis rate of POEs was discussed, respectively. Finally, the lubricating mechanism anlyzed from these results of wear characteristics, adsorptivity and hydrolysis rate was proposed. That is to say, POEs are firstly adsorbed to friction surface and decomposed by hydrolysis or thermal degradation. Fatty acids obtained by degradation of POEs form adsorption film on friction surface. The larger become cohesive ability among fatty acid molecules in the adsorption film, the better gets the wear performance of POEs.

• 산업기술연구
• /
• 제27권A호
• /
• pp.19-24
• /
• 2007

This research was done for possible treatment of impermeable surfaces rainwater runoff containing heavy metal ions by manganese oxide coated on polypropylene support. Manganese oxide was coated by Birnessite Coating Methods(BCM)and the coating analyzed by SEM and FT-IR techniques. The efficiency of heavy metal ions adsorption was also assessed via both batch and column tests. Adsorption efficiencies of Cd, Zn, Cu, and Pb were 99.4%, 98.9%, 96.7%, and over 95.7%, respectively. The adsorption progress pattern reveals quite fast adsorption at initial periods of treatment and change to slower rates at later times.