• Advances in environmental research
• /
• v.4 no.2
• /
• pp.135-142
• /
• 2015

In this study, we evaluated the adsorption/desorption of uranium (U) in pure soil environment using continuous column reactor. We additionally investigated the adsorption/desorption mechanism of U on vivianite surface in molecular scale using quantum calculation. We observed that below $0.1{\mu}M$ of U was detected after 20 d from U injection ($1{\mu}M$) in adsorption test. However, all of absorbed U was detached from vivianite surface in 24 h by injection of CARB solution ($1.44{\times}10^{-2}M\;NaHCO_3$ and $2.8{\times}10^{-3}M\;Na_2CO_3$). Based on exchange energy calculation, we found that $UO_2(CO_3)_2{^{2-}}$ and $UO_2(CO_3)_3{^{4-}}$ species have higher repulsive energy than $UO_2(OH)_2$ species. The results obtained from this study could be applied to predict the behavior of uranium in contaminated and remediation sites.

• Journal of Environmental Science International
• /
• v.24 no.9
• /
• pp.1123-1129
• /
• 2015

This research was performed by means of several different virgin granular activated carbons (GAC) made of each coal, coconut and wood, and the GACs were investigated for an adsorption performance of iodine-131 in a continuous adsorption column. Breakthrough behavior was investigated that the breakthrough points of the virgin two coals-, coconut- and wood-based GACs were observed as bed volume (BV) 7080, BV 5640, BV 5064 and BV 3192, respectively. The experimental results of adsorption capacity (X/M) for iodine-127 showed that two coal- based GACs were highest (208.6 and $139.1{\mu}g/g$), the coconut-based GAC was intermediate ($86.5{\mu}g/g$) and the wood-based GAC was lowest ($54.5{\mu}g/g$). The X/M of the coal-based GACs was 2~4 times higher than the X/M of the coconut-based and wood-based GACs.

• The Journal of Natural Sciences
• /
• v.13 no.1
• /
• pp.35-50
• /
• 2003

Granular clay minerals for adsorption of the organic dye prepared a Na-Bentonite and optimum condition calcined temperature $700^{\circ}C$ and polyvinyl alcohol quantity was 25%. Granular clay mineral stable range was pH3 to pH9 and specific area was $83m^2/g$. The adsorption of the organic dye on the Granular clay mineral showed result good adsorption with acid medium and then enthalpy was -3.36 ~ -0.84 kcal/mol. It was exhibit typical physical adsorption.

• Journal of Electrochemical Science and Technology
• /
• v.7 no.2
• /
• pp.153-160
• /
• 2016

The inhibition ability of N,N-bis(2,4-dihydroxyhydroxybenzaldehyde)-1,3-Propandiimine (DHBP) as a schiff base against the corrosion of API-5L-X65 steel in 1 M HCl solution was evaluated by electrochemical impedance spectroscopy, potentiodynamic polarization and scanning electron microscopy. Electrochemical impedance studies indicated that DHBP inhibited corrosion by blocking the active corrosion sites. The inhibition efficiency increased with increasing inhibitor concentrations. EIS data was analysed to equivalent circuit model and showed that the charge transfer resistance of steel increased with increasing inhibitor concentration whilst the double layer capacitance decreased. The adsorption of this compound obeyed the Langmuir adsorption isotherm. Gibbs free energy of adsorption was calculated and indicated that adsorption occurred through physical and spontaneous process. The corrosion inhibition mechanism was studied by potential of zero charge. Polarization studies indicated that DHBP retards both the cathodic and anodic reactions through adsorption on steel surface. Scanning electron microscopy was used to study the steel surface with and without inhibitor.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.3
• /
• pp.315-322
• /
• 1996

Recently, hospital acquired infections have an increase interest as a public problems, which are caused of indoor pollutants in hospital. Microorganisms, ethylene oxide, formaldehyde, and anesthetic gases are main hazardous pollutants in hospital. The possible pathways of the infection are a respiratory channel as well as a blood channel. The blood channel is concerned since these pollutants might be dissolved into the Ringer's solution. The objective of this research was to evaluate the removal efficiencies of adsorption trap for formaldehyde and microorganisms as indoor pollutants which permeated into the Ringer's solution. Dissolved formaldehyde in the solution was increased with the injection dose time. The amount of dissolved formaldehyde was 67.5 $\pm$ 9.5% in Ringer's solution when injection dose time was controlled about 7hrs. An adsorption trap was designed for preventing formaldehyde and microorganisms to be permeated into Ringer's solution. The adsorption trap was packed with 0.4g of active carbon (60/80 mesh) in a sterilized plastic tube (7.79 cm length, 0.46 cm i.d.) and both ends were packed with glass wool. Devised infusion set equipped with the adsorption trap showed 99.9% of removal efficiency for formaldehyde. Microorganism numbers detected on sterilized water for injection and 5% dextrose infusion used in the hospital were 2,695 $\times 10^3$ cells/l and 4,190 $\times 10^3$ cells/l, respectively. Removal efficiency by the adsorption trap was 92.3 $\pm$ 8.5% as for microorgnisms.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.2
• /
• pp.237-242
• /
• 2006

$Fe_3O_4$ and $CoFe_2O_4$ magnetic nanoparticles have been synthesized successfully in aqueous solution and coated with oleic acid. The solid and organic solution of the synthesized nanoparticles was obtained. Self-assembled monolayer films were formed using organic solution of these nanoparticles. The crystal sizes determined by Debye-Scherre equation with XRD data were found close to the particle sizes calculated from TEM images, and this indicates that the synthesized particles are nanocrystalline. Especially, EDS, ED, FT-IR, TGA/DTA and DSC were used to characterize the nanoparticles and the oleic acid adsorption, and it was found that oleic acid molecule on the $Fe_3O_4$ nanoparticle is a bilayer adsorption, while that on $CoFe_2O_4$ nanoparticle is single layer adsorption. The superparamagnetic behavior of the nanoparticles was documented by the hysteresis loop measured at 300 K.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.1
• /
• pp.27-36
• /
• 2007

Milled Korean pine (Pinus densiflora) wood was used to evaluate its adsorption capacity of Cu(II) ions from aqueous solution by running a series of batch experiments. Prior to the tests, the milled woods were pretreated with 1N NaOH, 1N $NHO_3$, and distilled water, respectively, to examine the effect of pretreatment. Within the tested pH range in this study between 3 and 6, copper adsorption efficiency of NaOH-treated wood(96~99%) was superior than $NHO_3$-treated wood(19~31%) and distilled water-treated wood(18~35%). Adsorption behavior of copper onto both raw and $NHO_3$-treated woods was mainly attributed to interaction with carboxylic acid group. For NaOH-treated wood, carboxylate ion produced by hydrolysis was a major functional group responsible for Cu sorption. NaOH treatment of wood changed the ester and carboxylic acid groups into carboxylate group, whereas $NHO_3$ treatment did not affect the production of functional groups which could bind copper. A pseudo second-order kinetic model fitted well for the sorption of copper ion onto NaOH-treated wood. A batch isotherm test using NaOH-treated wood showed that equilibrium sorption data were better represented by the Langmuir model than the Freundlich model.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.16-22
• /
• 2021

We search for an appropriate initial adsorption coordination of precursor on surface by using genetic algorithm (GA) and density functional theory. SiH₄ and Al(CH₃)₃ as precursor, and OH-terminated Si (001) as surface are used for this study. Selection, crossover, and mutation as hyperparameters of GA are applied to search for the adsorption coordination of the precursors on the surface as a function of generation. Bond distances between precursors and the surface are used to explain the adsorption behavior of the precursors.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.1
• /
• pp.138-147
• /
• 2022

The synergistic effect of 2-chloromethylbenzimidazole (2-CBI) and potassium iodide (KI) for mild steel in 1 M hydrochloric acid solution was investigated by potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS). The results showed that, with the addition of 100 ppm potassium iodide, the inhibition efficiecy (IE) of 100 ppm 2-CBI in 1 M hydrochloric acid had been improved from 91.14% to 96.15%. And synergistic parameter of 100 ppm 2-CBI with different amounts of potassium iodide is always greater than 1. The adsorption of potassium iodide combining with 100 ppm 2-CBI obeys to the Langmuir adsorption isotherm. Thermodynamic adsorption parameters, including ∆G⁰_ads, ∆H_a and ∆S_a of the adsorption of the combinned inhibitor, as well as the E_a of the mild steel corrosion in 1 M HCl with the combinned inhibitor, were calculated.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.11
• /
• pp.642-648
• /
• 2015

Oak wood based activated carbon was modified with surface impregnation of $Fe^{3+}$ and $Al^{3+}$ metal ions mixture for enhancements of phosphate adsorption capacity in aqueous solution. The phosphate adsorption capacity of the prepared metal impregnated carbon (MC) was about 8 times higher than that of the original activated carbon (OC). Adsorption equilibrium capacities of the phosphate increased with increasing system temperature. The adsorption equilibrium isotherm of phosphate on the prepared MC could be represented by the Langmuir equation. Thermodynamic parameters also indicated that adsorption system was spontaneous and endothermic reaction. The internal diffusion coefficient was measured to analyze the adsorption behavior and kinetic rate. To determine the internal diffusion coefficient, pore diffusion model (PDM) was employed and the result was in good agreement with experimental data.