• 공업화학
• /
• 제34권6호
• /
• pp.596-602
• /
• 2023

크롬 기반 금속유기골격체(MIL-101(Cr))를 제조하고 이들을 활용한 유사화학작용제 diisopropyl methyl phosphonate(DIMP) 흡착 실험을 통해 방독면 정화통이나 보호의 충진물질로서 활용 가능성을 평가하였다. MIL-101(Cr)은 조절인자로 아세트산(MIL-101(Cr)-A)과 수산화나트륨(MIL-101(Cr)-N)을 활용하여 각각 제작하였는데, 아세트산을 조절인자로 사용하였을 때 보다 넓은 비표면적과 높은 DIMP 흡착량을 보였다. MIL-101(Cr)-A는 상대습도 90% 환경에서 10일 동안 노출 시 흡착제 무게 대비 약 160%의 수분을 흡수하여 활성탄 등 다른 흡착제와 비교할 때 흡수율이 높았다. MIL-101(Cr)-A를 상대습도 90% 환경에서 일정기간 노출한 시료에 대한 DIMP 흡착량 실험 결과 24시간 이후에는 노출되지 않았을 때 흡착량의 약 40% 수준으로 감소하였으나, 이 흡착량은 상용 방독면 정화통 충진 활성탄과 비교하였을 때 여전히 높은 흡착량으로 추후 방독면 정화통이나 보호의 충진물질로서 활용가능성이 높은 것으로 판단된다.

• Advances in environmental research
• /
• 제4권2호
• /
• pp.119-133
• /
• 2015

Water pollution means that the physical, chemical and biological properties of water are changing. In this study, adsorption was chosen as the treatment method because it is an eco-friendly and low cost approach. Magnetite is a magnetic material that can synthesize chemical precipitation. Magnetite was used for the removal of copper in artificial water samples. For this purpose, metal removal from water dependent on the pH, initial concentration of metal, amount of adsorbent and effect of sorption time were investigated. Magnetite was characterized using XRD, SEM and particle size distribution. The copper ions were determined by atomic absorption spectrometry. The adsorption of copper on the magnetite was studied in a batch process, with different aqueous solutions of Cu (II) at concentrations ranging from 10 to $50mg\;l^{-1}$. Optimum conditions for using magnetite were found to be concentration of $10mg\;L^{-1}$, pH: 4.5, contact time: 40 min. Optimum adsorbent was found to be 0.3 gr. Furthermore, adsorption isotherm data were analyzed using the Langmuir and Freundlich equations. The adsorption data fitted well with the Freundlich ($r^2=0.9701$) and Langmuir isotherm ($r^2=0.9711$) equations. Kinetic and equilibrium aspects of the adsorption process were studied. The time-dependent Cu (II) adsorption data were described well by a pseudo-second-order kinetic model.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.189-190
• /
• 2020

The importance of indoor air quality management has recently been highlighted due to environmental problems such as indoor air pollution. Among indoor air pollutants, carbon dioxide occurs in cooking, heating, burning, and causes forgetfulness, dementia and amnesia. Radon, which occurs in building materials, soil and ground, is a type 1 carcinogen that causes lung cancer in the body through breathing. These substances can be released from the room through ventilation, but there is a limit to reducing the amount of indoor activity due to reduced ventilation conditions due to increased indoor activity time. However, these substances can be removed from the gas by adsorption. The purpose of this study was to identify the properties of granular active and powdered active white soil and mix them to make cement-based active white soil adsorbent matrix for carbon dioxide, fine dust and radon gas adsorption, and to evaluate indoor air improvements according to the mixing scale. The results of the experiment showed that active carbon dioxide adsorption performance increased for carbon dioxide and radon as the exchange rate increased through physical adsorption. In particular, the higher the replacement rate of the granular active bag, the better adsorption performance was shown.

• 한국환경과학회지
• /
• 제14권1호
• /
• pp.61-69
• /
• 2005

Adsorption characteristics of toluene vapor, which is one of important source of volatile organic compounds (VOCs), by activated carbon were investigated using a fixed bed adsorption column. The operating parameters such as breakthrough curve, adsorption capacity, mass transfer zone (MTZ), and length of unused bed (LUB) were studied. The experimental results showed that the breakthrough time decreased with increasing inlet toluene concentration and gas flow rate. MTZ and LUB increased with the increase of inlet concentration, gas flow rate, and particle size of activated carbon. The adsorption capacity increased with the increase of inlet toluene concentration, while it decreased with increasing particle size. However, it was kept at constant value regardless of the increase of gas flow rate. Adsorption isotherm of toluene vapor could be represented by the Freundlich adsorption equation fairly well. From the adsorption experiments using some VOC gases such as toluene, xylene, butyl acetate. butanol and acetone, it was also found that the adsorption capacity was higher in the case of gas with higher boiling point and lower vapor pressure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1565-1568
• /
• 1996

The adsorption and desorption behavior of orgnaic gases were investigated using the resonant frequency and admittance method. Sensitive material were depositied on the quartz crystal microbalence by using Langmuir-Blodgett method. To investigate the response characteristics of organic gases, Resonant frequency-Resonant admittance (F-A) diagram was used. The quantity and quality information about organic gases can be obtained by that diagram. As a results, when the organic gases were adsorpted into sensitive material, the physical property changees of sensitive material were occured.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.405-408
• /
• 1996

The rheological changes in sensitive materials was investigated by using QCA. Langmuir-Blodgett method was used to transfer sensitive material to the quartz crystals because of its facility to control the thickness. To develop gas sensor using quartz crystal, the rheological change of sensitive LB films were observed using the resonant resistance concept. And the rheological changes as to adsorption of organic vapours were used to analyze the response mechanism between organic vapours and sensitive LB films. We considered with resonant frequency of quartz crystal to obtain one-channel gas sensor and analytical tools of organic vapours response. In our results, we analyzed the organic vapours response by the rheological changes and mass loading as to adsorption of organic vapours.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.105-106
• /
• 2022

Now, the world is increasingly anxious about fine dust due to abnormal temperatures caused by global warming and increased yellow dust caused by desertification, and the World Health Organization (WHO) pointed out that more than 99% of the world's population is exposed to fine dust. In this situation, the reduction rate of fine dust and carbon dioxide of the matrix was tested by using expanded graphite, an eco-friendly and porous material, to improve air quality. As a result of the test, since expanded graphite is a material that expands between layers compared to conventional graphite, the reduction rate of fine dust and carbon dioxide decreases as the replacement rate of expanded graphite increases.

• Membrane and Water Treatment
• /
• 제15권3호
• /
• pp.131-137
• /
• 2024

Euryale ferox Salisb. is an important plant resource and valuable tonic in traditional Chinese medicine. The seed of Euryale ferox Salisb. is rich in starch. There are few reports of modification and functional properties of Euryale ferox starch. In present study, the Euryale ferox starch was extracted, carboxymethyl etherified starches were synthesized, the starch-based hydrogels were prepared, and adsorptive properties were investigated. The results of investigation showed that carboxymethyl etherified Euryale ferox starch-based adsorbent has the potential for methylene blue removal. Therefore, Euryale ferox starch has an appealing application prospect in adsorption for scavenging dyes from real complex waste liquid.

• 대한화장품학회지
• /
• 제24권3호
• /
• pp.51-58
• /
• 1998

Generally pigment differs from dye stuff because it cannot be melted in water but also because it is stable physically and chemically. In this study you will discover the function, properties and effects of Micai-TiO$_2$-SiO$_2$pigment as abase material pigment. But until now used Mica of the base material is about 7-l5${\mu}{\textrm}{m}$ with an average diameters of 15${\mu}{\textrm}{m}$. A new characteristic superficial pigment was obtained from covering the TiO$_2$ and SiO$_2$ with the adsorption result of isoelectric point of a Mica flake, TiO$_2$ and SiO$_2$In the composition reaction study of adsorption was done as well as the physical characteristics of the superficial texture of the obtained material. L,a,b of color change as oil was absorbed, optical nature and change of reflection according to direct and diffused reflection. In the composition of Mica slurry the best result obtained was in a solution with pH 2.0 to 2.3. Following this result, we can come to the idea that electrical attraction was done during the change of electrical charge of the Mica and TiO$_2$ deposit. Also this pigment shows a big scale between the direct reflection and diffused reflection light. Using this characteristic in cosmetic, it was obtained a natural but a contrast between light and shadow making possible a sculptured make-up. Color change due to oil adsorption was insignificant which improved the last of make up.

• Membrane and Water Treatment
• /
• 제11권3호
• /
• pp.231-235
• /
• 2020

Industrialization and modern developments have led to an influx of toxic heavy metals into the aquatic environment, and the accumulation of heavy metals has serious adverse effects on humans. Among the various heavy metal treatment methods, adsorption is very useful and frequently used. Plastic materials, such as polypropylene and polyethylene, have been widely used as filter media due to their mechanical and chemical stability. However, the surface of plastic material is inert and therefore the adsorption capability of heavy metals is very limited. In this study, granular media and fiber media composed of polypropylene and polyethylene are used, and the surface modification was conducted in order to increase adsorption capability toward heavy metals. Oxygen plasma generated hydroxyl groups on the surface of the media to activate the surface, and then acrylic acid was synthesized on the surface. The grafted carboxyl group was confirmed by FT-IR and SEM. Heavy metal adsorption capability of pristine and surface modified adsorbents was also evaluated. Overall, heavy metal adsorption capability was increased by surface modification due to electrostatic interaction between the carboxyl groups and heavy metal ions. Fibrous PP/PE showed lower improvement compared to granular PP media because pore blockage occurred by the surface modification step, thereby inhibiting mass transfer.