• 상하수도학회지
• /
• 제34권3호
• /
• pp.201-210
• /
• 2020

2 (Langmuir, Freundlich, Elovich, Temkin, and Dubinin-Radushkevich) and 3 (Sips and Redlich-Peterson)-parameter isotherm models were applied to evaluated for the applicability of adsorption of Cu(II) and/or phosphate isotherm using chitosan bead. Non-linear and linear isotherm adsorption were also compared on each parameter with coefficient of determination (R²). Among 2-parameter isotherms, non-linear Langmuir and Freundlich isotherm showed relatively higher R² and appropriate maximum uptake (q_m) than other isotherm equation although linear Dubinin-Radushkevich obtained highest R². 3-parameter isotherm model demonstrated more reasonable and accuracy results than 2-parmeter isotherm in both non-linear and linear due to the addition of one parameter. The linearization for all of isotherm equation did not increase the applicability of adsorption models when error experiment data was included.

• Environmental Engineering Research
• /
• 제23권3호
• /
• pp.330-338
• /
• 2018

This study investigated the possibility of using potassium titanate oxide ($K_2Ti_4O_9$) and acrylic acid-grafted polypropylene fabric (PP-g-AA) as adsorbents capable of removing strontium from aqueous solutions. $K_2Ti_4O_9$ showed the highest rate of strontium removal in the weak alkaline range, while the PP-g-AA increased strontium removal in the neutral range. Moreover, the adsorption capacity of the $K_2Ti_4O_9$ was not affected by the coexistence of K and Na ions, while the adsorption capacity decreased when Ca and Mg ions were present at the same concentration as that of strontium. When coexisted at the same concentration as strontium, Na, K, Ca, and Mg ions strongly reduced the adsorption capacity of the PP-g-AA. The results also indicated that the adsorption of strontium on $K_2Ti_4O_9$ was consistent with both the Langmuir and Freundlich adsorption isotherms. In contrast, the adsorption of strontium on the PP-g-AA was more consistent with the Langmuir isotherm model. Moreover, the adsorption equilibrium time of $K_2Ti_4O_9$ was generally 12 h, while that of the PP-g-AA was 5 h, indicating that the adsorption rates were consistent with the pseudo-second order kinetics model. $K_2Ti_4O_9$ and the PP-g-AA could be regenerated by simple washing with 0.5 N HCl.

• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.3319-3326
• /
• 2014

Eosin yellow는 유용한 염료나 색소로 사용되지만 유해한 독성을 가진 물질이다. 본 연구에서는 활성탄을 사용하여 eosin yellow를 흡착하는데 필요한 흡착평형과 흡착동역학에 대하여 pH, 초기농도, 접촉시간 등을 변수로 하여 조사하였다. 등온흡착평형관계를 검토한 결과 평가된 Langmuir 상수값, $R_L$=0.067-0.083과 Freundlich 상수값 $\frac{1}{n}=0.237-0.267$로부터 활성탄에 의한 eosin yellow의 흡착조작이 적절한 처리방법이 될 수 있음을 알았고, Temkin 상수값, B=1.868-2.855 J/mol과 Dubinin-Radushkevich 식 상수값, E=5.345-5.735 kJ/mol로부터 흡착공정이 물리흡착공정임을 알았다. 흡착공정에 대한 동력학적 해석을 통해 반응속도식의 적용결과는 유사이차반응속도식이 유사일차반응속도식에 비해 일치도가 높은 것으로 나타났으며, 입자내확산식에 의해 흡착공정은 경계층확산과 입자내확산의 2단계로 진행되는 것을 알았다.

• Korean Chemical Engineering Research
• /
• 제57권2호
• /
• pp.210-218
• /
• 2019

실로퓨트를 이용한 식물세포 Taxus chinensis 유래 주요 타르성분인 2-피콜린 흡착 실험을 수행하였다. 2-피콜린 초기농도, 흡착 온도 및 시간을 달리한 회분식 흡착 평형 데이터를 Langmuir, Freundlich, Temkin, Dubinin-Radushkevich 등온흡착식에 적용하였다. 실로퓨트를 이용한 2-피콜린의 흡착은 Langmuir 흡착등온식에 가장 적합함을 알 수 있었다. 흡착온도가 증가함에 따라 흡착용량이 감소하는 경향을 보였으며 실로퓨트를 이용한 2-피콜린 흡착 공정이 적합함을 알 수 있었다. 동역학적 해석을 통하여 본 흡착 공정은 유사 이차 반응속도식에 잘 따름을 알 수 있었으며, 입자 내 확산과 경계층 확산이 율속 단계에 거의 영향을 미치지 않았다. 열역학적 해석을 통해 흡착 과정이 발열이며, 비가역적 비자발적으로 수행되었다. 흡착량이 증가함에 따라 등량흡착열은 감소하는 경향을 보여 흡착제의 표면 에너지가 불균일함을 알 수 있었다.

• Advances in environmental research
• /
• 제6권2호
• /
• pp.113-125
• /
• 2017

Santa Barbara Amorphous-15(SBA-15) nanoparticles were utilized as the inexpensive and effective adsorbents to remove methylene blue dye from the aqueous solution.SBA-15 was created by Zhao et al method. Infrared spectroscopy, X-ray diffraction and scanning electron microscopy (SEM) were used for the evaluated physical properties of SBA-15. The results of diffraction X-ray indicated that was the crystalline structure for it. Also IR spectroscopy indicated was a silica the whole structure of the groups and SEM image verify the structure of relatively identical particles size of SBA-15. Factors affecting adsorption including the amounts of adsorbent, pH and contact time were investigated by a SBA-15 nanomaterial design. The extent of dye removal enhanced with increasing initial dye concentration and pH from 4 to 10. The higher percentage adsorption were obtained under optimum conditions of variables (sorbent dose of 200 mg/liter, initial MB concentration 10 mg/liter, initial pH of 10 and temperature of $25^{\circ}C$). Maximum adsorption happened after the 2 hour and the kinetic processes of the dyes adsorption were described by applying the pseudo-first-order and the pseudo-second-order and the relatively High correlation with the kinetic Ellovich models. It was found that the pseudo-second-order models kinetic equation described the data of dye adsorption with a good correlation (R2>0.999) which indicated chemisorption mechanism. Freundlich and Langmuir adsorption models were investigated in conditions of variables (adsorbent dose 0.01 gr/liter, MB concentration 10, 20, 30 mg/liter, pH of 4, 7, 10, contact time 90 min and temperature of $27^{\circ}C$). The adsorption data were represented by Langmuir isotherm model. These values are higher than the adsorption capacities of some other adsorbents that have recently been published in the literature.

• Korean Chemical Engineering Research
• /
• 제50권1호
• /
• pp.83-87
• /
• 2012

활성탄소섬유를 사용하여 염소소독 후 수돗물 내에 부산물로 존재하는 4종 트리할로메탄을 제거하였다. THMs의 종류별 농도 및 용액의 온도를 달리하면서 흡착실험을 수행하고 활성탄소섬유의 표면특성에 따른 흡착능력과 흡착메카니즘을 살펴본 결과, 4종의 THMs은 모두 Langmuir 타입의 흡착등온곡선을 보이면서 매우 신속하게 활성탄소섬유에 흡착되었다. THMs의 흡착은 활성탄소섬유의 표면에 균일하게 발달된 미세공의 입구에 물리적 및 화학적 수소결합으로 이루어졌다고 판단된다. Langmuir 타입은 특히 저농도 오염원 일때 제거효율이 높기 때문에 수돗물 내에 약 $30{\mu}g/L$ 수준으로 존재하는 THMs의 제거에는 활성탄소섬유가 매우 효과적임을 알 수 있다. 4종 THMs 종류별 흡착량은 큰 차이는 없으나 chloroform, bromodichloromethane, dibromochloromethane, 및 bromoform 의 순서로 증가하였다. 이는 brom 원자수의 증가와 일치하며 극성의 감소로 용해도가 낮아짐에 따라 흡착량이 증가한 것이다.

• Membrane and Water Treatment
• /
• 제14권1호
• /
• pp.1-10
• /
• 2023

This study explored the feasibility of calcium-rich food waste, Mactra veneriformis shells (MVS), as an adsorbent for phosphate removal, and its removal efficiency was enhanced by the thermal activation process. The CaCO3 in MVS was converted to CaO by thermal activation (>800 ℃), which is more favorable for adsorbing phosphate. Thermal activation did not noticeably influence the specific surface area of MVS. The MVS thermally activated at 800 ℃ (MVS-800), showed the highest phosphate adsorption capacity, was used for further adsorption experiments, including kinetics, equilibrium isotherms, and thermodynamic adsorption. The effects of environmental factors, including pH, competing anions, and adsorbent dosage, were also studied. Phosphate adsorption by MVS-800 reached equilibrium within 48h, and the kinetic adsorption data were well explained by the pseudo-first-order model. The Langmuir model was a better fit for phosphate adsorption by MVS-800 than the Freundlich model, and the maximum adsorption capacity of MVS-800 obtained via the Langmuir model was 188.86 mg/g. Phosphate adsorption is an endothermic and involuntary process. As the pH increased, the phosphate adsorption decreased, and a sharp decrease was observed between pH 7 and 9. The presence of anions had a negative impact on phosphate removal, and their impact followed the decreasing order CO₃^2- > SO₄²- > NO₃^- > Cl^-. The increase in adsorbent dosage increased phosphate removal percentage, and 6.67 g/L of MVS-800 dose achieved 99.9% of phosphate removal. It can be concluded that the thermally treated MVS-800 can be used as an effective adsorbent for removing phosphate.

• 대한화학회지
• /
• 제54권1호
• /
• pp.125-130
• /
• 2010

본 연구에서는 수용액 중에서 유해한 brilliant green (BG) 제거를 위한 탄소와 산화철 나노복합재료의 흡착특성을 살펴보았다. 탄소와 산화철 나노복합재료는 화학침전법과 $750^{\circ}C$에서 질산 철과 탄소를 열처리 함으로서 합성하였다. 그 생성물은 TEM, XRD, 그리고 TGA를 이용하여 확인하였다. 나노복합재료에 대한 BG의 흡착 연구는 열역학적 인자와 반응속도론적인자들을 이용하여 수행하였다. 흡착 속도식은 준 이차 속도식이 준 일차 속도식에 비해 잘 들어맞는다고 보여준다. 실험 결과는 Langmuir 과 Freundlich 흡착 등온선을 이용하여 분석하였다. 평형 데이터는 Langmuir모델에 잘 들어맞으며 최대 단일 층 흡착 용량 64.1 mg/g 을 갖는다. 열역학적 인자들은 나노복합재료에 BG의 흡착 으로부터 유도하며 흡착은 자발적이며 흡열 과정임을 확인하였다.

• 대한환경공학회지
• /
• 제33권9호
• /
• pp.686-691
• /
• 2011

본 연구는 MEA가 함침된 MCM-41에 대하여 이산화탄소 흡착실험과 특성 분석을 하였다. 흡착제의 XRD, FT-IR, $N_2$흡탈착 실험을 통하여 물리적 특성을 분석하였으며, 흡착실험은 15%의 이산화탄소를 사용하여 GC-TCD를 통하여 분석하였다. MEA 함침량이 10~40 wt%까지 함침량이 증가할수록 이산화탄소 흡착능은 증가하였다. 그러나 MEA 함침량이 50 wt%에서 흡착능이 감소하였다. 많은 아민이 제공되면 흡착제 표면에서 제공된 아민이 변형되는 경향이 있다. 그러므로 이산화탄소 흡착능이 감소될 수 있다. 본 연구의 결과로 이산화탄소 흡착을 위한 MCM-41에 MEA의 함침 함량의 조절이 중요하다는 것으로 사료되어진다.

• 한국환경과학회지
• /
• 제20권2호
• /
• pp.241-249
• /
• 2011

In this research, equilibrium of adsorption and kinetics of As(V) removal were investigated. The coal mine drainage sludge(CMDS) was used as adsorbent. To find out the physical and chemical properties of CMDS, XRD (X-ray diffraction), XRF (X-ray fluorescence spectrometer) analysis were carried out. The CMDS was consist of 70% of goethite and 30% of calcite. From the results, an adsorption mechanism of As(V) with CMDS was dominated by iron oxides. Langmuir adsorption isotherm model was fitted well more than Freundlich isotherm adsorption model. Adsorption capacities of CMDS 1 was not different with CMDS 2 on aspect of amounts of arsenic adsorbed. The maximum adsorption amount of two CMDS were respectively 40.816, 39.682 mg/g. However, the kinetic of two CMDS was different. The kinetic was followed pseudo second order model than pseudo first order model. Concentrations of arsenic in all segments of the polymer in CMDS 2 does not have a constant value, but the rate was greater than the value of CMDS 1. Therefore, CMDS 2, which is containing polymer, is more effective for adsorbent to remove As(V).