Advances in environmental research

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Adsorption of methylene blue from an aqueous dyeing solution by use of santa barbara amorphous-15 nanostructure: Kinetic and isotherm studies

  • Alizadeh, Reza (Department of Science and Environmental Engineering, Khatam Al Anbia University of Technology) ;
  • Zeidi, Amir (Department of Science and Environmental Engineering, Khatam Al Anbia University of Technology)
  • Received : 2017.03.23
  • Accepted : 2017.05.27
  • Published : 2017.06.25
⟨ Previous Next ⟩

Abstract

Santa Barbara Amorphous-15(SBA-15) nanoparticles were utilized as the inexpensive and effective adsorbents to remove methylene blue dye from the aqueous solution.SBA-15 was created by Zhao et al method. Infrared spectroscopy, X-ray diffraction and scanning electron microscopy (SEM) were used for the evaluated physical properties of SBA-15. The results of diffraction X-ray indicated that was the crystalline structure for it. Also IR spectroscopy indicated was a silica the whole structure of the groups and SEM image verify the structure of relatively identical particles size of SBA-15. Factors affecting adsorption including the amounts of adsorbent, pH and contact time were investigated by a SBA-15 nanomaterial design. The extent of dye removal enhanced with increasing initial dye concentration and pH from 4 to 10. The higher percentage adsorption were obtained under optimum conditions of variables (sorbent dose of 200 mg/liter, initial MB concentration 10 mg/liter, initial pH of 10 and temperature of $25^{\circ}C$). Maximum adsorption happened after the 2 hour and the kinetic processes of the dyes adsorption were described by applying the pseudo-first-order and the pseudo-second-order and the relatively High correlation with the kinetic Ellovich models. It was found that the pseudo-second-order models kinetic equation described the data of dye adsorption with a good correlation (R2>0.999) which indicated chemisorption mechanism. Freundlich and Langmuir adsorption models were investigated in conditions of variables (adsorbent dose 0.01 gr/liter, MB concentration 10, 20, 30 mg/liter, pH of 4, 7, 10, contact time 90 min and temperature of $27^{\circ}C$). The adsorption data were represented by Langmuir isotherm model. These values are higher than the adsorption capacities of some other adsorbents that have recently been published in the literature.

Keywords

References

  1. Asouhidou, D.D. (2009), "Adsorption of Remazol Red 3BS from aqueous solutions using APTES-and cyclodextrin-modified HMS-type mesoporous silicas", Coll. Surf. A: Physicochem. Eng. Asp., 346(1), 83-90. https://doi.org/10.1016/j.colsurfa.2009.05.029
  2. Asadi, A. (2012), "Direct poly azo dye decolorization using nanophotocatalytic uv/nio process", 23(6), 1042-1050.
  3. Badiei, A. (2014), "Adsorptive removal of toxic dye from aqueous solution and real industrial effluent by tris (2-aminoethyl) amine functionalized nanoporous silica", Environ. Progr. Sustain. Energy, 33(4), 1242-1250. https://doi.org/10.1002/ep.11923
  4. Benhamou, A. (2009), "Aqueous heavy metals removal on amine-functionalized Si-MCM-41 and Si-MCM-48", J. Hazard. Mater., 171(1), 1001-1008. https://doi.org/10.1016/j.jhazmat.2009.06.106
  5. Chen, Z. (2012), "Multicarboxylic hyperbranched polyglycerol modified SBA-1 5for the adsorption of cationic dyes and copper ions from aqueous media", Appl. Surf. Sci., 258(13), 5291-5298. https://doi.org/10.1016/j.apsusc.2012.02.021
  6. Chowdhury, S. (2011), "Adsorption thermodynamics, kinetics and isosteric heat of adsorption of malachite green onto chemically modified rice husk", Desalin., 265(1), 159-168. https://doi.org/10.1016/j.desal.2010.07.047
  7. Crini, G. and Badot, P.M. (2008), "Application of chitosan, a natural aminopolysaccharide, for dye removal from aqueous solutions by adsorption processes using batch studies: A review of recent literature", Progr. Polym. Sci., 33(4), 399-447. https://doi.org/10.1016/j.progpolymsci.2007.11.001
  8. Donia, A.M. (2009), "Effect of structural properties of acid dyes on their adsorption behaviour from aqueous solutions by amine modified silica", J. Hazard. Mater., 161(2), 1544-1550. https://doi.org/10.1016/j.jhazmat.2008.05.042
  9. Deng, H. (2011), "Adsorption of methylene blue on adsorbent materials produced from cotton stalk", Chem. Eng. J., 172(1), 326-334. https://doi.org/10.1016/j.cej.2011.06.013
  10. El Haddad, M. (2012), "Evaluation of performance of animal bone meal as a new low cost adsorbent for the removal of a cationic dye rhodamine B from aqueous solutions", J. Saudi Chem. Soc., 34-41.
  11. Ghanbarian, M. (2008), "A pilot study of RO16 discoloration and mineralization in textile effluents using the nanophotocatalytic process", J. Wat. Wastewat., 69, 45-51.
  12. Guendy. (2009), "Enhancing of textil wastewater treatment using different catalysts for advanced oxidation process", Aust. J. Bas. Appl. Sci., 3.
  13. Hou, H. (2012), "Removal of congo red dye from aqueous solution with hydroxyapatite/chitosan composite", Chem. Eng. J., 211, 336-342.
  14. Huang, C.H. (2011), "Adsorption of cationic dyes onto mesoporous silica", Micropor. Mesopor. Mater., 141(1), 102-109. https://doi.org/10.1016/j.micromeso.2010.11.002
  15. Ho, Y.S. and McKay, G. (1998), "Kinetic models for the sorption of dye from aqueous solution by wood", Proc. Safety Environ. Protect., 76(2), 183-191. https://doi.org/10.1205/095758298529326
  16. Han, R. (2006), "Removal of methylene blue from aqueous solution by chaff in batch mode", J. Hazard. Mater., 137(1), 550-555. https://doi.org/10.1016/j.jhazmat.2006.02.029
  17. Kavitha, D. and Namasivayam, C. (2007), "Experimental and kinetic studies on methylene blue adsorption by coir pith carbon", Biores. Technol., 98(1), 14-21. https://doi.org/10.1016/j.biortech.2005.12.008
  18. Kazemi, L. (2004), "Decolorization of R-120 dye using ozone and ozone/UV in a semi-batch reactor", Can. J. Chem. Eng., 82, 1284-1288.
  19. Khaled, A. (2009), "Removal of direct N blue-106 from artificial textile dye effluent using activated carbon from orange peel: Adsorption isotherm and kinetic studies", J. Hazard. Mater., 165(1), 100-110. https://doi.org/10.1016/j.jhazmat.2008.09.122
  20. Kresge, C. (2008), "Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism", Nat., 359(6397), 710-712. https://doi.org/10.1038/359710a0
  21. Li, Y. (2013), "Comparative study of methylene blue dye adsorption onto activated carbon, graphene oxide, and carbon nanotubes", Chem. Eng. Res. Des., 91(2), 361-868. https://doi.org/10.1016/j.cherd.2012.07.007
  22. Li, X. (2015), "Preparation, characterization, and application of mesoporous silica-grafted graphene oxide for highly selective lead adsorption", Chem. Eng. J., 273, 630-637. https://doi.org/10.1016/j.cej.2015.03.104
  23. Liang, Z. (2008), "Stepwise growth of melamine-based dendrimers into mesopores and their CO2 adsorption properties", Micropor. Mesopor. Mater., 111(1), 536-543. https://doi.org/10.1016/j.micromeso.2007.08.030
  24. Mane, V.S., Mall, I.D. and Srivastava, V.C. (2007), "Use of bagasse fly ash as an adsorbent for the removal of brilliant green dye from aqueous solution", Dyes Pigment., 73(3), 269-278. https://doi.org/10.1016/j.dyepig.2005.12.006
  25. Mirhasani, A. (2014), Optimization of the Adsorption of Malachite Green on the NH2-SBA-15 Nano-Adsorbent Using the Taguchi Method by QUALITEK-4, Software an Isotherm, Kinetic, and Thermodynamic Study.
  26. Neamtu. (2004), "Decolorization of disperse red 354 azo dye in water by several oxidation processes a comparative study", Dyes Pigment., 60, 61-68. https://doi.org/10.1016/S0143-7208(03)00129-3
  27. Paul, M., Pal, N. and Bhaumik, A. (2012), "Selective adsorption and release of cationic organic dye molecules on mesoporous borosilicates", Mater. Sci. Eng.: C, 32(6), 1461-1468. https://doi.org/10.1016/j.msec.2012.04.026
  28. Shahbazi, A.,Younesi, H. and Badiei, A. (2011), "Functionalized SBA-15 mesoporous silica by melaminebased dendrimer amines for adsorptive characteristics of Pb (II), Cu (II) and Cd (II) heavy metal ions in batch and fixed bed column", Chem. Eng. J., 168(2), 505-518. https://doi.org/10.1016/j.cej.2010.11.053
  29. Taguchi, A. and Schuth, F. (2005), "Ordered mesoporous materials in catalysis", Micropor. Mesopor. Mater., 77(1), 1-45. https://doi.org/10.1016/j.micromeso.2004.06.030
  30. Tseng, H. (2012), "Synthesis of TiO2/SBA-15 photocatalyst for the azo dye decolorization through the polyol method", Chem. Eng. J., 210, 529-538. https://doi.org/10.1016/j.cej.2012.09.036
  31. Xiao, N. (2015), "Adsorptive removal and kinetics of methylene blue from aqueous solution using NiO/MCM-41 composite", Phys. E: Low-dimens. Syst. Nanostruct., 65, 4-12. https://doi.org/10.1016/j.physe.2014.08.006
  32. Yue, Y. (1999), "Direct synthesis of AlSBA mesoporous molecular sieves: Characterization and catalytic activities", Chem. Commun., 19, 1967-1968.
  33. Zhao, D. (1998), "Nonionic triblock and star diblock copolymer and oligomeric surfactant syntheses of highly ordered, hydrothermally stable, mesoporous silica structures", J. Am. Chem. Soc., 120(24), 6024-6036. https://doi.org/10.1021/ja974025i
  34. Zhao, D. (1998), "Triblock copolymer syntheses of mesoporous silica with periodic 50 to 300 angstrom pores", Sci., 279(5350), 548-552. https://doi.org/10.1126/science.279.5350.548

Cited by

  1. Isotherm, kinetic and thermodynamic studies of dye removal from wastewater solution using leach waste materials vol.8, pp.1, 2017, https://doi.org/10.12989/aer.2019.8.1.023