• 약학회지
• /
• 제39권3호
• /
• pp.283-288
• /
• 1995

Rapid gas chromatographic profiling method was applied to saliva from healthy subjects for the analysis of free organic acids. Saliva samples were first saturated with NaHCO$_{3}$ and extracted with diethyl ether. The aqueous phase was solid-phase extracted using Chromosorb P as the adsorbent and diethyl ether as the eluent after the acidification and NaCl saturation, followed by triethylamine treatment. The resulting tiiethylammonium salts of acids were directly converted into stable tert.-butyl-dimethylsflyl derivatives, with subsequent analysis by dual-capiuary column gas chromatography and gas chromatograpy -mass spectrometry. From the ten saliva samples studied, twenty eight free organic acids including various fatty acids, hydroxy acids, dicarboxylic acids, md aromatic acids were tentatively identified. Among the acids identified , the concentration of lactic acid was highest for five saliva samples while $\alpha$-hydroxyisocaproic acid was most abundant for me sample, and succinic acid and glycolic acid for two samples. respectively. When the GC profiles were simplified to the corresponding acid retention index spectra of bar graphical form, they presented characteristic patterns for each individual.

• 통합자연과학논문집
• /
• 제10권1호
• /
• pp.43-50
• /
• 2017

Synthetic resins were combined 1-aza-12-crown-4 macrocyclic ligand with styrene divinylbenzene copolymer having 1%, 2%, 8%, and 16% crosslink by a substitution reaction. These synthetic resins were confirmed by chlorine content, elementary analysis, SEM, surface area, and IR-spectrum. As the results of the effects of pH, crosslink of synthetic resin, and dielectric constant of a solvent on metal ion adsorption for resin adsorbent, the metal ions showed high adsorption at pH 3 or over. Adsorption selectivity for the resin in ethanol solvent was the order of uranium ($UO_2{^{2+}}$) > cobalt ($Co^{2+}$) > dysprosium ($Dy^{3+}$) ion, adsorbability of the metal ion was the crosslink in order of 1%, 2%, 8%, and 16% and it was increased with the lower dielectric constant. In addition, theses metal ions could be separated in the column with 1% crosslink resin by using nitric acid (pH 2.0) as an eluent.

• 산업기술연구
• /
• 제27권A호
• /
• pp.19-24
• /
• 2007

This research was done for possible treatment of impermeable surfaces rainwater runoff containing heavy metal ions by manganese oxide coated on polypropylene support. Manganese oxide was coated by Birnessite Coating Methods(BCM)and the coating analyzed by SEM and FT-IR techniques. The efficiency of heavy metal ions adsorption was also assessed via both batch and column tests. Adsorption efficiencies of Cd, Zn, Cu, and Pb were 99.4%, 98.9%, 96.7%, and over 95.7%, respectively. The adsorption progress pattern reveals quite fast adsorption at initial periods of treatment and change to slower rates at later times.

• 약학회지
• /
• 제36권2호
• /
• pp.120-125
• /
• 1992

Ths sorption and desorption properties of four different solid adsorbents were evaluated for the trace enrichment of diphenylhydantoin from biological samples. Graphitized carbon black(GCB) gave the highest adsorption coefficient. And among the organic solvents examined, methanol gave the highest desorption coefficient. Using the GCB column, the optimum elution volume of the eluting solvent was evaluated from the breakthrough curve of diphenylhydantoin. The usefulness of GCB as the solid adsorbent was examined for the solid-phase extraction of diphenylhydantoin from serum in the concentration range of $20-50\;{\mu}g/ml$.

• 한국지반환경공학회 논문집
• /
• 제15권8호
• /
• pp.39-44
• /
• 2014

초임계 조건에서 제조된 망간산화물이 코팅된 활성탄($Mn_3O_4$/AC)에 의한 납 흡착특성을 규명하기 위해 칼럼실험을 통해 파과특성에 미치는 운전변수의 영향에 관해 실험하였다. 활성탄에 망간산화물을 코팅시킴으로써 물질전달대와 평형흡착량은 대략 2.8배 증가하는 것으로 나타났다. 흡착층 높이의 증가는 수용액이 흡착대에 체류하는 시간을 증가시켜 파과시간, 물질전달대와 평형흡착량을 증가시키는 것으로 나타났다. 칼럼으로 공급되는 유량이 증가함에 따라 수용액으로부터 흡착제로 납이 빠르게 전달되어 접촉되므로 파과시간과 물질전달대가 감소하였다. 유량 증가는 흡착대에서 납의 체류시간을 감소시켜 흡착경계면에서의 확산현상을 감소시키므로 평형흡착량을 감소시키는 것으로 나타났다. 칼럼으로 유입되는 납 농도가 증가하면 흡착제로 전달되는 납의 양이 증가하여 물질전달이 빠르게 완료되므로 파과시간과 물질전달대가 감소하는 것으로 나타났다.

• Environmental Engineering Research
• /
• 제10권5호
• /
• pp.247-256
• /
• 2005

A combination of the submerged membrane activated-sludge bioreactor(SMABR) equipped with non-woven fabric filter and oyster-zeolite (OZ) packed-bed adsorption column was studied to evaluate the advanced tertiary treatment of nitrogen and phosphorous. The non-woven filter module was submerged in the MBR and aeration was operated intermittently for an optimal wastewater treatment performance. Artificial wastewater with $COD_{Cr}$ of 220 mg/L, total nitrogen (T-N) of 45 mg/L, and total phosphorous (T-P) of 6 mg/L was used in this study. MLSS was maintained about $4,000\;{\sim}\;5,000\;mg/L$ throughout the experiments. The experiments were performed for 100-day with periodic non-woven filter washing. The results showed that $COD_{Cr}$ could be effectively removed in SMABR alone with over 94% removal efficiency. However, T-N and T-P removal efficiency was slightly lower than expected with SMABR alone. The permeate from SMABR was then passed through the OZ column for tertiary nutrients removal. The final effluent analysis confirmed that nutrients could be additionally removed resulting in over 87% and 46% removal efficiencies for T-N and T-P, respectively. The results of this study suggest that the waste oyster-shell can be effectively reclaimed as an adsorbent in advanced tertiary wastewater treatment processes in combination with SMABR equipped with non-woven fabric filter.

• 대한토목학회논문집
• /
• 제6권4호
• /
• pp.29-42
• /
• 1986

산업발달로 인하여 산업공장에서 다량의 중금속이 배출되어 하천을 오염시키고 있다. 이로 인하여 수중생물에도 중금속이 축적되고, 농업용수로 이용한 농촌의 토양을 오염시키고 농작물에 중금속이 축척되는 것을 알 수 있다. 이러한 피해를 줄이기 위한 방안으로 물속에 용해되어 있는 각종 중금속을 제거시키는 것이 가장 시급한 문제이다. 따라서 본 연구에서는 폐 타이어를 이용하여 중금속중 카드뮴, 구리, 아연, 은 등의 이온을 흡착, 제거하기 위한 실험을 행했으며, 동시에 활성탄에 의한 실험을 행함으로써 폐 타이어의 효율을 비교 고찰한다. 따라서 폐기물 재활용과 공장폐수 처리장의 시설 및 운영비 절감면의 경제성에도 목적이 있다. 중금속 농도는 Automic Absorption Spectrophotometer로 측정하였으며, 온도, 흡착제주입량, 흡착제의 크기, 원수의 농도, 접촉시간 등에 따른 흡착평형식을 실험하여 흡착능을 알아내고, 또한 Column 실험을 통하여 접촉시간에 따른 중금속제거 특성과 흡착제의 여상깊이의 변화에 따른 중금속제거를 추정하여 BDST(Bed Depth/Service Time)식을 설정하여 실제 중금속 처리를 위한 설계치를 제시한다.

• 대한화학회지
• /
• 제55권3호
• /
• pp.454-462
• /
• 2011

C-Metylcalix[4]resorcinarene(CMCR)에서 Pb(II)와 Cr(III)의 흡착 특징에 대한 연구는 수행되어왔다. CMCR은 resorcinol, acetaldehyde 그리고 HCl로 부터 1단계 합성으로 만들어졌다. 일괄처리시스템에서 대부분의 변수는 CMCR이 Pb(II)와 Cr(III)에 대해 좋은 흡착제라는 것을 확인했다. Cr(III)은 Pb(II)보다 더 크게 흡착되지만 Cr(III)의 흡착속도는 Pb(II) 보다 더 느리다. Pb(II)와 Cr(III) 흡착의 흡착운동에너지는 batch안에서 유사 2차 운동 모델을 따른다. 그러나 고정상 컬럼 시스템에서 Pb(II)의 운동에너지는 일차 모델을 따른다. 흡착된 Pb(II)을 되찾기 위한 탈착 연구는 증류수와 HCl을 가지고 순차적으로 수행되었다. 그리고 그 결과는 흡착은 화학흡착에 의해 지배된다는 것을 보여주었다.

• 한국환경과학회지
• /
• 제20권7호
• /
• pp.873-879
• /
• 2011

Adsorption experiment of carbon dioxide was performed on MCM41 silica impregnated with two kinds of EDA(ethylenediamine) and MEA(monoethanolamine). The prepared adsorbents were characterized by BET surface area, X-ray diffraction and FT-IR. The $CO_2$ capture study was investigated in a U type packed column with GC/TCD. The results of XRD for MCM-41 and amine-impregnated MCM41 showed typical the hexagonal pore system. BET results showed the MCM 41 impregnated amine to have a surface area of 141 $m^2/g$ to 595 $m^2/g$ and FT-IR revealed a N-H functional group at about 1400$cm^{-1}$ to 1600$cm^{-1}$. The $CO_2$ adsorption capacity on EDA and MEA was as follow: MCM41-EDA30 > MCM41 -EDA40 >MCM41-EDA20 >MCM-EDA10 and MCM41-MEA40 >MCM41-MEA30 > MCM41-MEA20> MCM41-MEA10. The MCM41-EDA30 showed the highest adsorption capacity due to physical adsorption and chemical adsorption by amino-group content. The results suggest that mesoporous media with EDA is effective adsorbent for $CO_2$ capture from flue gases.

• Environmental Engineering Research
• /
• 제25권1호
• /
• pp.104-113
• /
• 2020

Adsorptive breakthrough modelling is essential for design of a sorption packed bed. In this work, breakthrough modelling of the furfural uptake in bagasse fly ash (BFA) packed bed has been performed. Effect of various parameters like bed height (Z = 15-60 cm), flow rate (Q = 0.02-0.04 L/min) and initial furfural concentration (C_o = 50-200 mg/L) on the breakthrough curve of furfural sorption in a BFA packed bed have been studied. Enhanced breakthrough performance was observed for the higher value of Z, and lower values of C_o and Q. For C_o = 100 mg/L, packed bed operated at Q = 0.03 L/min and Z = 60 cm was found to have lowest adsorbent utilization rate of 5.61 g/L with highest breakthrough volume of 14.67 L. Bed depth service time and Thomas models well represented the experimental data points under all experimental conditions. It can be concluded that BFA can be utilized efficiently in continuous system for the removal of furfural. Overall, more than 99% of furfural was adsorbed in BFA packed bed at experimental conditions.