• Asia-Pacific Journal of Business
• /
• v.12 no.1
• /
• pp.41-56
• /
• 2021

Purpose - This empirical study examined the influence of post-communist countries sociol-political factor of freedom of expression preconditioning, and trust in agency, mediating performance expectancy of social media users representing the citizens' behavioural intention to utilize social media in a post-communist country, the case of Mongolia. Design/methodology/approach - This research collected 403 valid survey data from citizens those who use social media in Mongolia. The study used Partial Least Squire (PLS) analysis with the research conceptual model founded on the UTAUT model. Findings - The study shown that citizens in post-communist, they strongly willing freedom of expression, which driving as a positive precondition factor, and this has an indirect positive influence, and trust in agency mediates to enhance performance expectancy. Social influence, and effort expectancy factors have direct positive influence on the intention to use of social media systems in the public sector domain of Mongolia. Research implications or Originality - This research proposed a new model to test citizens' intention to use social media as a communication tool to engage with public organizations in the pre-adoption stage of post-communist countries. Theoretically, this research builds up to the unique theoretical contribution with social media by examining a new social media-based third-party intercommunication medium, incorporating intent to utilize for citizens with government in post-communist countries. Practically, this article lays out the directions to aid social media usage for government sector with concerning citizens intentions in the post-communist situation.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.5
• /
• pp.85-94
• /
• 2019

The modular apartment has been completed for the first time in Korea through the national research and development (R&D) project in December 2017, and 30 households moved in. Although conditions such as technicality and constructability have to be satisfied to adopt and spread the modular apartments in the future, economic feasibility is the most important factor among the conditions. The economic feasibility of modular apartments can be compared with that of existing reinforced concrete (RC) structure apartments. It is highly important to reduce the construction cost through standardization above all. The standardization refers to establishment of national design standards and principles, and it is important for manufacturers and building companies to comply with those standards and principles. The modular construction (MC) skill in Korea is at an early adoption stage and the MC market is not widely expanded yet. Thus, the application of the MC design, which is the basis of the standardization, has not been widely accepted. However, related R&D projects are now performing mainly by the Ministry of Land, Infrastructure, and Transport to promote modular apartments in recent years and the design standardization standard (draft) is now prepared to be notified as a result of the steady research. Furthermore, pilot complexes for demonstration purpose are under construction, starting from public rental apartments. Thus, MC method-applied public rental houses will be spread in near future. This study aims to investigate the current design status in the Ga-Yang Housing as a pilot modular complex to produce and supply more economical and efficient modular houses, and analyze the problems by comparing the design standardization standards with pre-notified design standardization standards and summarize the modifications between them thereby presenting foundational data for establishment of the design standardization in the modular business industry.

• English & American cultural studies
• /
• v.10 no.2
• /
• pp.1-27
• /
• 2010

By taking the form of a fictional autobiography, a Japanese American woman writer Lydia Minatoya tries to solve the inexpressible confliction which Japanese Americans experience in their living in America. In her first published fiction, Talking to High Monks in the Snow, the writer faithfully tries to follow the Japanese I-story tradition where meandering of personal petit histories and frequent self-pities are constructed without solid action, characters and plot. Here appear many accidental others whom function as significant yet fleeting subalterns. In contrast, in the second fiction, The Strangeness of Beauty published seven years later, the I-narratives undergoes some drastic transformations by authorial intrusion, dramatic and haiku styles, and appearances of actorial agents. Just working as an invisible yet important stagehand (kuroko in Japanese) behind the stage of life, the author now handles her own self-inquiry through more controllable distance and maturity as directors or photographers often do. However, despite achieving dramatic actions and artistic elegance mainly thanks to her adoption of western masterpieces's grand narratives, Minatoya seems to stop in the midway in her tallying work of fiction with fact by delaying the larger imaginable conflict through which the temporarily gained autonomy can be turned into a disaster anytime. Nonetheless, the reader feels relieved and encouraged after recognizing the fragile Asian female self's transformation as a new, flexible and autonomous self by her unwavering contact with two contrasting cultures and providing silent minority female characters with gradually stronger and uncannier voices.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.8
• /
• pp.13-21
• /
• 2021

In this paper, we developed an artificial intelligence literacy education program to strengthen the AI convergence education capacity and cultivate literacy of in-service elementary and secondary teachers, and verify the effect on the degree of interest in artificial intelligence convergence education by applying it. As a test tool, the level of interest questionnaire scale developed by George, Hall & Stiegelbauer(2006) was used based on the center of interest acceptance model of Hall et al.(1979). As a result of analyzing the degree of interest in artificial intelligence convergence education before and after the application of the artificial intelligence literacy education program, the types of non-users were found both before and after the application of the program, but the overall degree of interest increased compared to before application. As a result of analyzing the satisfaction result of the artificial intelligence literacy education program, a response that was satisfied in most areas was derived, but there was a tendency to be somewhat less satisfied with the case of convergence and application of artificial intelligence and industry.

• Computers and Concrete
• /
• v.30 no.4
• /
• pp.277-287
• /
• 2022

Due to the scarcity of extortionate experimental data, fatigue failure of the reinforced concrete (RC) element might be achieved economically adopting nonlinear finite element (FE) analysis as an alternative approach. However, conventional implicit dynamic analysis is expensive, quasi-static method overlooks interaction effects and inertia, direct cyclic analysis computes stabilized responses. Apart from this, explicit dynamic analysis may provide a numerical operating system for factual long-term responses. The study explores the fatigue behavior based on a simplified explicit dynamic solution employing nonlinear time domain analysis. Among fourteen RC beams, one beam is selected to validate under static loading, one under fatigue with the experimental study and other twelve to check the detail fatigue behavior. The SWOT (Strength, Weakness, Opportunities, Threats) analysis has been carried out to pinpoint the detail scenario in the adoption of numerical approach as an alternative to the experimental study. Excellent agreement of FE and experimental results is seen. The 3D nonlinear RC beam model at service fatigue limits is truthful to be used as an expedient contrivance to envisage the precise fatigue behavior. The simplified analysis approach for RC beam under fatigue offers savings in computation to predict responses providing acceptable accuracy rather than the complicated laboratory investigation. At higher frequency, the flexural failure occurs a bit earlier gradually compared to the repeated loading case of lower frequency. The deflection increases by 6%-10% at the end of first cycle for beams with increasing frequency of cyclic loading. However, at the end of fatigue loading, greater deflection occur earlier for higher load range because of more rapid stiffness degradation. For higher frequency, a slight boost in concrete compressive strains at an initial stage of loading has been seen indicating somewhat stepper increment. Stiffness degradation in larger loading cycle at same duration escalates the upsurge of the rate of strain in case of higher frequency.

• Journal of Korean Public Health Nursing
• /
• v.35 no.3
• /
• pp.448-468
• /
• 2021

Objectives: This study aimed to understand the trends and issues of health-related intervention research using Intervention Mapping over the last ten years in South Korea. Intervention Mapping is a representative planning protocol to develop theory-and-evidence-based health promotion programs. Methods: The scoping review method was undertaken, and a total of 20 studies were analyzed using Intervention Mapping six steps. Results: The Korean health-related intervention studies using Intervention Mapping showed low methodological quality. In step 1, only 7 out of 20 studies organized a planning group consisting of various stakeholders. In step 2, about half of the studies did not present a matrix, which is the core essential component of Intervention Mapping. In step 5, only 1 out of 20 studies presented program adopters and maintainers. In step 6, most studies described effect evaluation relatively, but only one study mentioned process evaluation. Conclusions: In order to develop sustainable and cost-effective programs, systematic planning using Intervention Mapping is required from the research planning stage. In addition, a concrete and realistic plan needs to be established for the development of programs and adoption, dissemination and maintenance of programs.

• Korean Journal of Community Nutrition
• /
• v.27 no.4
• /
• pp.296-308
• /
• 2022

Objectives: This study aimed to develop evaluation criteria for the elementary-school-based health promotion program using the RE-AIM framework and to examine their feasibility. Methods: Previous evaluation studies on health interventions for elementary-school students using the RE-AIM framework were reviewed systematically to identify appropriate evaluation criteria. A diet and physical activity intervention based on the transtheoretical model was implemented in a pilot study using the "Happy Me" application. The feasibility of using the RE-AIM framework to evaluate it was examined. Results: The review yielded the following evaluation criteria: "reach," the ratio of participants out of the total target population; "efficacy/effectiveness," the difference in outcomes between the intervention and control groups, or between a pre- and post-test; "adoption," the rate of use of the program and participation in the next stage of the program; "implementation," the progress on the program components; "maintenance," the participants' and teachers' intention to continue using the program. The pilot study reached 76.6% of the targeted population. The intake of sugar-sweetened beverages decreased (P < 0.0001), and the duration of walking increased (P < 0.0001). Other indicators could not be evaluated; therefore, potential indicators were suggested. Conclusions: This study produced feasible evaluation criteria for elementary-school-based health promotion using the RE-AIM framework. Nevertheless, the feasibility needs to be validated with a broader range of studies and long-term interventions.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.75-84
• /
• 2020

Modular construction is a construction method whereby prefabricated volumetric units are produced in a factory and are installed on site to form a building block. The construction productivity can be substantially improved by the manufacturing and assembly of standardized modular units. 3D printing is a computer-controlled fabrication method first adopted in the manufacturing industry and was utilized for the automated construction of small-scale houses in recent years. Implementing 3D printing in the fabrication of modular units brings huge benefits to modular construction, including increased customization, lower material waste, and reduced labor work. Such implementation also benefits the large-scale and wider adoption of 3D printing in engineering practice. However, a critical issue for 3D printed modules is the loading capacity, particularly in response to horizontal forces like wind load, which requires a deeper understanding of the building structure behavior and the design of load-bearing modules. Therefore, this paper presents the state-of-the-art literature concerning recent achievement in 3D printing for buildings, followed by discussion on the opportunities and challenges for examining 3D printing in modular construction. Promising 3D printing techniques are critically reviewed and discussed with regard to their advantages and limitations in construction. The appropriate structural form needs to be determined at the design stage, taking into consideration the overall building structural behavior, site environmental conditions (e.g., wind), and load-carrying capacity of the 3D printed modules. Detailed finite element modelling of the entire modular buildings needs to be conducted to verify the structural performance, considering the code-stipulated lateral drift, strength criteria, and other design requirements. Moreover, integration of building information modelling (BIM) method is beneficial for generating the material and geometric details of the 3D printed modules, which can then be utilized for the fabrication.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.17-28
• /
• 2024

As listed as one of the most important requirements for Post-Quantum Cryptography standardization process by National Institute of Standards and Technology, the resistance to various side-channel attacks is considered very critical in deploying cryptosystems in practice. In fact, cryptosystems can easily be broken by side-channel attacks, even though they are considered to be secure in the mathematical point of view. The timing attack(TA) and the simple power analysis attack(SPA) are such side-channel attack methods which can reveal sensitive information by analyzing the timing behavior or the power consumption pattern of cryptographic operations. Thus, appropriate measures against such attacks must carefully be considered in the early stage of cryptosystem's implementation process. The Montgomery multiplier is a commonly used and classical gadget in implementing big-number-based cryptosystems including RSA and ECC. And, as recently proposed as an alternative of building blocks for implementing post quantum cryptography such as lattice-based cryptography, the big-number multiplier including the Montgomery multiplier still plays a role in modern cryptography. However, in spite of its effectiveness and wide-adoption, the multiplier is known to be vulnerable to TA and SPA. And this paper proposes a new countermeasure for the Montgomery multiplier against TA and SPA. Briefly speaking, the new measure first represents a multiplication operand without 0 digits, so the resulting multiplication operation behaves in a very regular manner. Also, the new algorithm removes the extra final reduction (which is intrinsic to the modular multiplication) to make the resulting multiplier more timing-independent. Consequently, the resulting multiplier operates in constant time so that it totally removes any TA and SPA vulnerabilities. Since the proposed method can process multi bits at a time, implementers can also trade-off the performance with the resource usage to get desirable implementation characteristics.

• Information Systems Review
• /
• v.25 no.2
• /
• pp.31-56
• /
• 2023

As the COVID-19 pandemic is prolonged, non-contact work has increased, as well as the demand for automation of simple and repetitive questions and tasks with success of using them. Therefore, companies are attempting to expand the area of automated business and apply various technologies such as AI to complex and various business processes of E2E to provide automation of all business. However, the extension to Intelligent Process Automation (IPA) is still in its beginning stage so that it is difficult to find practical use cases and related solutions. In this aspect, it is safe to say that there is insufficient evidence for companies which have various and complex enterprise processes to make a decision about the adoption. In this study, to solve this problem, a Hyper Automation Platform (HAP) that consists of RPA, Chatbot, and AI technology was proposed. Moreover, an implementation method that can bring intelligent process automation using HAP, and practical use-cases were provided so that it makes it possible to review the implementation of the HAP objectively and comprehensively. This study is meaningful and valuable to check the feasibility of the Hyper Automation concept and to actively utilize HAP.