• Journal of Advanced Marine Engineering and Technology
• /
• 제29권7호
• /
• pp.750-757
• /
• 2005

The objective of this study is an understanding of the effect of inlet flow angle on the output power performance of a Francis hydraulic turbine, An optimum induced angle at the inlet of the turbine is one of the most important design parameters to have the best performance of the turbine at a given operating condition, In general. rotating speed of the turbine is varied with the change of water mass flowrate in a volute, The induced angle of the inlet water should be properly adjusted to the operating condition to have maximum energy conversion efficiency of the turbine, In this study. a numerical simulation was conducted to have detail understanding of the flow phenomenon in the flow path and output power of the model Francis turbine. The indicated power produced by the model turbine at a given operating condition was found numerically and compared to the brake power of the turbine measured by experiment at KIER. From comparison of two results, turbine efficiency or energy conversion efficiency of the model turbine was estimated. From the study, it was found that the rotating power of the turbine linearly increased with the rotating speed. It means that the higher volume flow rate supplied. the bigger torque on the turbine shaft generated. The maximum brake efficiency of the turbine is around 46$\%$ at 35 degree of induced angle. The difference between numerical and experimental output of the model turbine is defined as mechanical efficiency. The maximum mechanical efficiency of the turbine is around 93$\%$ at 25$\∼$30 degree of induced angle.

• 한국측량학회지
• /
• 제33권2호
• /
• pp.103-110
• /
• 2015

본 논문에서는 통합기준점의 통합망 조정을 위해 학술용 망조정 소프트웨어에 대해 비교하고, 전국 단위로 통합망 조정을 실시하였다. 기존 통합기준점의 평면좌표 결정에서는 연도별로 다른 소프트웨어를 사용하였기 때문에 측량 시점과 데이터처리 해석 방법에서 오차가 발생하였으며, 이러한 오차를 줄이기 위해 다년간에 걸쳐 관측한 세션별 관측망을 하나의 망으로 구성하여 통합망 조정을 수행하였다. 통합망 조정을 위해서 Quasi-Observation Combination Analysis(QOCA)와 Global Kalman filter VLBI and GPS analysis program(GLOBK)를 비교·분석하였으며, 최종적인 통합망 조정 처리에는 GLOBK를 사용하여 단일 망조정을 실시하였다. 전국 단위의 통합망 조정을 실시한 결과, 수직방향의 RMSE는 ±0.03m 로서 다소 크게 나타났지만, 수평방향의 RMSE는 ±0.006m로서 기존결과와 근사한 결과를 얻을 수 있었다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권6호
• /
• pp.606-612
• /
• 2000

This study was performed to investigate the average anthropometric value of normal Korean men and women and to compare the preceding literatures. Additionally, average Korean profilogram was made to serve as a template for diagnosis of facial form. Eighty five Korean subjects(41 men, 44 women) aged between 21 to 26 were selected by members of the author's department on the basis of intact dentition and Class I occlusion without facial asymmetry. Frontal and lateral photographs were taken under standardized condition with digital camera. The image was magnified and adjusted according to the FH plane of cephalometric radiographs and digitized using personal computer. To compare the Western beauty, 25 esthetically pleasing female was selected to measure various angle and distance of the face. 1. It was possible to calculate the mean coordinate value of Korean normal samples which enables the direct visualization and comparison with the use of template. The method in this study was easy to applicate under the Microsoft $Windows^{(R)}$ bases. 2. Maxillary vertical hypoplasia, upper and lower lip protrusion was characteristics of Korean norms and relatively narrow alar base distance, less conspicuous nasal projection was observed. As the vermilion exposure and upper lip length was more than western norm, chin looks shorter than western. To compare the Korean and Western esthetically pleasing profile, facial convexity and nose was less conspicuous in Korean women.

• 대한지구과학교육학회지
• /
• 제5권2호
• /
• pp.139-147
• /
• 2012

The purpose of this study was to explain how extraordinary the scientific technology or our ancestor was from the modern perspective by remodeling the most unique astronomical instrument, So-ganui (小簡儀), developed in the Sejong Period (世宗時代) after being examined with contemporary and the principles of the science and observational technology would be properly understood and measured directly. When measuring the altitude of the sun and azimuth using So-ganui, it was adjusted with the horizontal coordinate system and measured using Jipyeonghwan (地平環), Ipeunhwan (立運環) and Guyhyeong (窺衡). Based such measuring principles, the measurement accuracy proposed using So-ganui are as follows. The remodeled So-ganui produced approximately ${\pm}0.29$ degrees error on average at high altitude while in measuring the azimuth degrees, there was difference of ${\pm}0.35$ degrees. Since the theoretically, the measurement error for So-ganui was ${\pm}0.5$ degrees, the remodeled So-ganui could accurately measure at the high altitude compared to So-ganui from the Sejong period. In the study, So-ganui, which has disappeared, has been remodeled in modern perspective to be used as the educational material to accurately understand the principles of science and measurement technology from the Sejong period. The findings could contribute to raising the reputation in the astronomical observations from the documents from the Sejong period. Furthermore, this study has materialized the celestial and sky our ancestors have viewed with the observational principles of their times, on the computer screen via a webcam, bringing out interest in the traditional science for the students.

• Journal of Radiation Protection and Research
• /
• 제28권2호
• /
• pp.97-108
• /
• 2003

복잡한 지형상에서 바람장 분포를 산정하기 위해 변분기법에 근거한 3차원 바람장 모델을 개발하였다. Lagrangian multiplier와 조정된 바람장 분포를 얻기 위하여 직각 및 지형을 따르는 좌표계상에서 3차원 타원형 편미분 방정식이 수립되었다. 반구, 반 실린더 및 안장 형태의 지형상에서 바람장의 변화를 추정하기 위해 계산이 수행되었고, 또한 지형을 따르는 좌표계상에서 바람장 모델이 Gauss precision moduli의 변화에 따른 바람장 특성을 평가하기 위하여 적용되었다. 산정결과 수평 및 수직 바람 성분은 Gauss precision moduli값의 선정에 강하게 영향을 받고 있음이 확인되었다.

• The Journal of Korean Physical Therapy
• /
• 제28권1호
• /
• pp.8-13
• /
• 2016

Purpose: The purpose of the present current study was to examine control of upper limb multi-joint movements with differential coordination stability. To achieve the goals of the study, torque analyses were utilized to answer questions about how torque components were differed among various elbow-wrist coordination patterns. Methods: Eight self-reported right-handed college students (3 males and 5 females, mean age=20.6 yr) were volunteered. The task required participants to rhythmically coordinate the flexion-extension motions of their elbow and wrist with coordination relationship of $0^{\circ}$, $90^{\circ}$, and $180^{\circ}$relative phases between the two joints. Mean relative phase and phase stability (standard deviation of relative phase) were computed to for analysisze of overall coordination performance. To determine the figure out characteristics of torque components in elbow and wrist joints, impulse values of muscle torque (MT) and interactive torque (IT) and MT as a percentage of cycle duration (MT-PCD) were analyzed. Results: Torque results showed that the proximal elbow joint generated motions with mainly muscle efforts regardless of coordination patterns, while the distal wrist joint adjusted the coordination patterns by changing amount of MT. Impulse analyses showed that the least stable $90^{\circ}$ pattern was performed by utilizing a similar coordination strategy of the most stable $0^{\circ}$ pattern. Conclusion: The present current study suggests that the roles of distal and proximal joints differ in order to achieve various multi-joint coordination movements. This study provides information for use in gives an idea to development of rehabilitation or training programs for to persons with an impaired upper limb motor ability.

• 한국광학회지
• /
• 제33권6호
• /
• pp.252-259
• /
• 2022

투과 매트릭스 방법을 이용하여 다중모드 광섬유 출력단에서 빛의 세기 분포를 제어하는 연구를 수행하였다. 공간 빛 변조기를 이용하여 원형으로 배치된 Hadamard 고유모드 위상분포를 실험적으로 구현하고, 네 가지 위상 값 변조 방법을 통하여 다중모드 광섬유의 투과 매트릭스를 실험적으로 도출하였다. 도출한 투과 매트릭스를 기반으로 광섬유에 입사하는 빛에 공간적인 위상 분포를 사전에 적용함으로써 광섬유 출력단의 원하는 위치에 빛을 집속하고자 하였다. 다중모드 광섬유 출력단 코어의 특정 위치에서 주변 배경 신호 대비 최대 359.6배 큰 세기로 빛을 집속할 수 있었으며 다중모드 광섬유 코어 영역 전반에 걸쳐 평균적으로 104.6배 향상된 값으로 빛을 집속할 수 있었다.

• 농업생명과학연구
• /
• 제51권1호
• /
• pp.205-212
• /
• 2017

경운기 시뮬레이터 운전자가 가상환경에서 교육에 몰입할 수 있도록 현실세계에 가상 물체를 겹쳐 보여주는 증강 현실 기술을 구현하였다. 3D 카메라 입력 장치로부터 초당 30 frame 이상 속도로 경운기 모의 운전 장치의 영상을 획득한다. 획득된 현실 영상을 크로마키 처리하여 가상 현실과 결합하였다. RGB 영상의 HSI 변환 실험결과 색상 최대값 0.52, 최소값 0.153, 채도 최대값 0.57, 최소값 0.16, 명도 최대값 1, 최소값 0.12이 크로마키 처리를 위해 최적값이었다. 본 연구에서는 키패드를 이용하여 크로마키 처리된 현실 영상의 위치를 전 후 상 하 좌 우를 버튼으로 조정하여 초기 결합위치를 조정할 수 있고 최종 조정된 값은 저장하여 유지 관리되도록 하였다. 이를 토대로 초당 30프레임 이상의 속도로 가상현실과 크로마키 처리 영상을 결합한 증강현실 구현이 가능함을 보였다.

• 한국측량학회지
• /
• 제25권5호
• /
• pp.393-398
• /
• 2007

국가 기준측지계가 세계측지계로 변경됨에 따라 모든 국가기준점의 좌표를 기존의 동경측지계에서 세계측지계로 변환해야 한다. 본 연구에서는 우리나라 삼각점자료 중에서 현재까지 남아있는 EDM 단일 관측지역의 세계측지계 좌표를 산정하였다. 이전의 정밀 2차 데이터 셋을 확보하여 이설자료를 조사 및 검증하여 데이터 셋에 갱신하고, 새로운 데이터 셋을 구축하였다. 구축된 데이터 셋을 국토지리정보원에서 고시한 변환파라미터를 이용하여 KGD2002 좌표계로 변환하였으며, EGM96 모델을 이용하여 지오이드고를 산정하고, 이전에 보정하지 않았던 지오이드고에 대한 영향을 분석하여 보정하였다 보정된 자료를 데이터 셋에 반영하고, GPS 2등 및 GPS망과 EDM망의 경계부분의 GPS 3등 기준점을 확보하여 경위도(BL) 망조정을 수행하여 최종 성과를 산출하였다. 최종 망조정 결과 표준편차(Mo)가 최소 1.37", 최대 2.13"로 나타났으며, 본 연구를 통하여 산출된 성과는 국가기준점성과로 사용 가능할 것으로 판단된다.

• Korean Journal of Radiology
• /
• 제24권5호
• /
• pp.454-464
• /
• 2023

Objective: We aimed to investigate current expectations and clinical adoption of artificial intelligence (AI) software among neuroradiologists in Korea. Materials and Methods: In April 2022, a 30-item online survey was conducted by neuroradiologists from the Korean Society of Neuroradiology (KSNR) to assess current user experiences, perceptions, attitudes, and future expectations regarding AI for neuro-applications. Respondents with experience in AI software were further investigated in terms of the number and type of software used, period of use, clinical usefulness, and future scope. Results were compared between respondents with and without experience with AI software through multivariable logistic regression and mediation analyses. Results: The survey was completed by 73 respondents, accounting for 21.9% (73/334) of the KSNR members; 72.6% (53/73) were familiar with AI and 58.9% (43/73) had used AI software, with approximately 86% (37/43) using 1-3 AI software programs and 51.2% (22/43) having up to one year of experience with AI software. Among AI software types, brain volumetry software was the most common (62.8% [27/43]). Although 52.1% (38/73) assumed that AI is currently useful in practice, 86.3% (63/73) expected it to be useful for clinical practice within 10 years. The main expected benefits were reducing the time spent on repetitive tasks (91.8% [67/73]) and improving reading accuracy and reducing errors (72.6% [53/73]). Those who experienced AI software were more familiar with AI (adjusted odds ratio, 7.1 [95% confidence interval, 1.81-27.81]; P = 0.005). More than half of the respondents with AI software experience (55.8% [24/43]) agreed that AI should be included in training curriculums, while almost all (95.3% [41/43]) believed that radiologists should coordinate to improve its performance. Conclusion: A majority of respondents experienced AI software and showed a proactive attitude toward adopting AI in clinical practice, suggesting that AI should be incorporated into training and active participation in AI development should be encouraged.