• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.169-174
• /
• 2005

본 논문에서는 시간영역 유한차분법(FDTD: Finite-Difference Time-Domain Method)과 설계민감도법(Design Sensitivity Analysis)을 이용하여 유전체 산란체(Dielectric Scatterer)를 복원하기 위한 역산란문제(Inverse Scattering의 새로운 해석기법을 제안하였다. 이때 복원의 빠른 수렴을 위하여 도함수를 이용한 설계민감도법을 도입하였고 본 연구에서는 시간영역 유한차분법으로부터 직접 설계민감도 수식을 도출하였다. 계산의 효율성을 위하여 보조변수법(Adjoint Variable Method)을 도입하여 보조변수 방정식을 도출하고 최적화 알고리듬으로 최대경사도법을 이용하여 반복적인 추정을 통하여 유전체를 복원하였다. 본 연구의 타당성의 보이기 위하여 2차원 $TM^2$에서의 유전체 복원 사례를 제시한다.

• 한국전산구조공학회논문집
• /
• 제23권5호
• /
• pp.535-541
• /
• 2010

본 연구에서는 정상상태의 비선형 열탄성 문제에 대하여 탄성 계수 및 열전도 계수에 대해서 보조변수법을 이용한 연속체 기반의 설계민감도 방정식을 유도하였고, 온도와 변위장이 연성된 보조방정식을 정의하여 효율적으로 설계민감도 해석을 수행하여 위상 최적설계에 적용하였다. 수치 예제를 통하여 열탄성 문제에서 위상 최적설계가 갖는 요소망 의존성을 살펴보았다. 또한 열 하중이 지배적인 경우와 기계적 하중이 지배적인 경우를 비교하여 다중 물리 연성문제에서 위상 최적설계가 갖는 하중에 대한 의존성을 고찰하였다.

• 한국항공우주학회지
• /
• 제34권7호
• /
• pp.18-27
• /
• 2006

일반적인 신뢰성 최적 설계는 결정론적 최적 설계에 비해 매우 많은 계산비용이 필요하므로 공력 형상 최적화와 같은 큰 문제에 직접 적용하기는 매우 어렵다. 본 연구에서는 이러한 한계를 극복하기 위하여 이점 근사화 기법과 adjoint 민감도 해석 기법을 결합한 효율적인 신뢰성 설계 과정을 제안한다. 이 방법은 계산비용은 결정론적 방법과 거의 동일하지만 계산 결과에 있어서는 기존의 신뢰성 설계 기법과 유사한 결과를 얻을 수 있다. 이를 이용하여 3차원 공력 형상 최적 설계를 매우 효율적으로 수행할 수 있었다.

• Journal of Magnetics
• /
• 제16권3호
• /
• pp.240-245
• /
• 2011

A new hybrid ON/OFF method is presented for the fast solution of electromagnetic inverse problems in high frequency domains. The proposed method utilizes both topological sensitivity (TS) and material sensitivity (MS) to update material properties in unit design cells. MS provides smooth design space and stable convergence, while TS enables sudden changes of material distribution when MS slows down. This combination of two sensitivities enables a reduction in total computation time. The TS and MS analyses are based on a variational approach and an adjoint variable method (AVM), which permits direct calculation of both sensitivity values from field solutions of the primary and adjoint systems. Investigation of the formulations of TS and MS reveals that they have similar forms, and implementation of the hybrid ON/OFF method that uses both sensitivities can be achieved by one optimization module. The proposed method is applied to dielectric material reconstruction problems, and the results show the feasibility and effectiveness of the method.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.66-78
• /
• 2007

A multi-point aerodynamic shape optimization technique has been developed for helicopter rotor blades in hover based on a continuous adjoint method on unstructured meshes. The Euler flow solver and the continuous adjoint sensitivity analysis were formulated on the rotating frame of reference. The 'objective function and the sensitivity were obtained as a weighted sum of the values at each design point. The blade section contour was modified by using the Hicks-Henne shape functions. The mesh movement due to the blade geometry change was achieved by using a spring analogy. In order to handle the repeated evaluation of the design cycle efficiently, the flow and adjoint solvers were parallelized based on a domain decomposition strategy. A solution-adaptive mesh refinement technique was adopted for the accurate capturing of the wake. Applications were made to the aerodynamic shape optimization of the Caradonna-Tung rotor blades and the UH-60 rotor blades in hover.

• 대한수학회보
• /
• 제54권2호
• /
• pp.679-686
• /
• 2017

The present paper is devoted to self-adjoint cyclically compact operators on Hilbert-Kaplansky module over a ring of bounded measurable functions. The spectral theorem for such a class of operators is given. We use more simple and constructive method, which allowed to apply this result to compact operators relative to von Neumann algebras. Namely, a general form of compact operators relative to a type I von Neumann algebra is given.

• Journal of applied mathematics & informatics
• /
• 제5권3호
• /
• pp.669-690
• /
• 1998

In this paper we develop a new theory of adjoint and symmetric method in the class of general implicit one-step fixed-stepsize methods. These methods arise from simple and natral def-initions of the concepts of symmetry and adjointness that provide a fruitful basis for analysis. We prove a number of theorems for meth-ods having these properties and show in particular that only the symmetric methods possess a quadratic asymptotic expansion of the global error. In addition we give a very simple test to identify the symmetric methods in practice.

• Journal of Mechanical Science and Technology
• /
• 제16권5호
• /
• pp.710-719
• /
• 2002

This study investigates a nonlinear inverse convection problem for a laminar-forced convective flow between two parallel plates. The upper plate is exposed to unknown heat flux while the lower plate is insulated. The unknown heat flux is determined using temperature measured on the lower plate. The thermophysical properties of the fluid are temperature dependent, which renders the problem nonlinear. The sequential gradient method is applied to this nonlinear inverse problem in order to solve the problem efficiently. The function specification method is incorporated to stabilize the sequential estimation. The corresponding adjoint formalism is provided. Accuracy and stability have been examined for the proposed method with test cases. The tendency of deterministic error is investigated for several parameters. Stable solutions are achieved eve]1 with severely impaired measurement data.

• Computers and Concrete
• /
• 제7권1호
• /
• pp.63-81
• /
• 2010

We present the shape determination method of 3-D reinforcement corrosion based on observed temperature on concrete surface. The non-destructive testing for reinforcement corrosion in concrete using a heat image on concrete surface have been proposed by Oshita. The position of the reinforcement of corrosion or the cavity can be found using that method. However, the size of those defects can not be precisely measured based on the heat image. We therefore proposed the numerical determination system of the shape for the reinforcement corrosion using the observed temperature on the concrete surface. The adjoint variable method is introduced to formulate the shape determination problem, and the finite element method is employed to simulate the heat transfer problem. Some numerical experiments and the examination for the number of the observation points are shown in this paper.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.127-134
• /
• 2004

In this paper, using an adjoint variable method, we develop a design sensitivity analysis (DSA) method applicable to heat conduction problems in steady state. Also, a topology design optimization method is developed using the developed DSA method. Design sensitivity expressions with respect to the thermal conductivity are derived. Since the already factorized system matrix is utilized to obtain the adjoint solution, the cost for the sensitivity computation is trivial. For the topology design optimization, the design variables are parameterized into normalized bulk material densities. The objective function and constraint are the thermal compliance of structures and allowable material volume, respectively. Through several numerical examples, the developed DSA method is verified to yield very accurate sensitivity results compared with finite difference ones, requiring less than 0.3% of CPU time far the finite differencing. Also, the topology optimization yields physical meaningful results.