• Restorative Dentistry and Endodontics
• /
• 제25권2호
• /
• pp.243-253
• /
• 2000

The purpose of this in vitro study was to evaluate dentin bonding by two different dentin bonding systems(DBS) using acetone based primer or adhesive [All Bond 2(AB2), One Step(OS)] when they were applied by wet or dry bonding technique. Morphology of resin-dentin interface and hybrid layer thickness(HLT) were investigated using Confocal Laser Scanning Microscope(CLSM) and compared to shear bond strength(SBS). 72 extracted sound human molars were randomly divided into 4 groups of 18 teeth each - Group 1.(AW); AB2 by wet bonding. Group 2(AD); AB2 by dry bonding. Group 3.(OW); OS by wet bonding, Group 4.(OD); OS by dry bonding. In 6 teeth of each group, notch-shaped class V cavities(depth 2mm) were prepared on buccal and lingual surface at the cementoenamel juction(12 cavities per group). To obtain color contrast in CLSM observation, bonding resins of each DBS were mixed with rhodamine B and primer of AB2 was mixed with sodium fluorescein. Prepared teeth of each group were treated with AB2, OS, respectively according to the manufacturer's instructions except for dentin surface moisture treatment after acid etching. In group 1 and 3, after acid etching, excess water was removed with wet tissue(Kimwipes), leaving consistently shiny, visibly hydrated dentin surface. In group 2 and 4, dentin surface was dried for 10 seconds at 1 inch distance. The treated teeth were then packed with composite resin(${\AE}$litefil) and light-cured. 12 microscopic samples($60{\sim}80{\mu}m$ thickness) of each group were obtained after longitudinal section and grinding(Exakt cutting and grinding system). Morphological investigation of resin-dentin interface and HLT measurement using CLSM were done. For measurement of SBS, remaining 12 teeth of each group were flattened occlusally to remove all enamel and grinded to 500 grit SiC(Pedemet Specimen Preparation Equipment). After applying DBS on the exposed dentin surface, composite resin was applied in the shape of cylinder, which has 5mm diameter, 1.5mm thickness, and light cured. SBS was measured using Instron with a crosshead speed of 0.5mm/min. It was concluded as follows, 1. HLT of AW(mean: $2.59{\mu}m$) was thicker than any other group, and followed by AD, OW, OD in descending order(mean; 2.37, 2.28, $1.92{\mu}m$). Only OD had statistically significant differences(p<0.05) to AW and AD. 2. There were intimate contact of resin and dentin at the interface in wet bonding groups, but gaps or irregular interfaces were observed in dry bonding groups. 3. The length, diameter, density of resin tags were various even in the same group without significant differences between groups and lots of adhesive lateral branches were observed. 4. There were no statistically significant difference of SBS between AB2 and OS, but SBS of wet bonding groups were significantly higher(p<0.05) than dry bonding groups. 5. There were no consistent relationships between HLT and SBS.

• 한국광학회지
• /
• 제34권4호
• /
• pp.157-169
• /
• 2023

헤드 마운티드 디스플레이(head mounted display, HMD)를 이용한 증강 현실(augmented reality, AR)은 군사, 의료, 제조, 게임 및 교육 등 다양한 분야에서 활용되고 있다. 본 논문에서는 HMD에 가장 필수적인 AR 광학계의 설계 및 제작에 대해 논의한다. HMD용 AR 광학계는 디스플레이의 증강 영상과 현실 세계를 동시에 볼 수 있는 넓은 투명 영역이 필요하다. 이를 위해, AR 광학계를 각각의 특성에 따라 세 부분으로 나누어 설계 및 제작하였다. 그리고 3개의 광학계를 하나의 완전한 AR 광학계로 만들기 위해 필요한 ultra-violet (UV) 접착층의 굴절률을 고려해 설계함으로써 입력 광원이 UV 접착 층을 통과할 때의 광경로 이동(shift) 현상을 최소화하였다. 또한, AR 광학계를 설계할 때 축외 수차를 보정하고 양산에 적합하도록 2개의 비구면을 사용했다. 끝으로 HMD 양산을 위해 두께 11 mm, 대각선 화각(diagonal field of view) 40°, 무게 11.3 g의 비구면 AR 광학계를 설계하고 제작하였다.

• Restorative Dentistry and Endodontics
• /
• 제35권1호
• /
• pp.5-12
• /
• 2010

본 연구에서는 인위적으로 노출시킨 비글견의 치수조직을 기존의 수산화칼슘제재와 MTA, 접착성 레진, 광중합형 수산화칼슘제재를 사용하여 직접치수복조한 후 각 재료에 따른 치수의 반응을 광학현미경 하에서 조직학적으로 관찰하여 비교분석하였다. 2마리 비글견의 36개 치아를 이용하여, 실험적으로 치수를 노출시키고 노출된 치수에 치수복조재를 적용한 후 와동은 복합레진으로 충전하여 직접치수복조술을 시행하였다: (1) Mineral Trioxide Aggregate (MTA: $ProRoot^{(R)}$ MTA, Dentsply, Tulsa, USA), (2) Clearfil SE Bond (Dentin adhesive system: Kuraray, Osaka, Japan), (3) Ultra-Blend (Photopolymerized Calcium hydroxide: Ultradent, South Jordan, USA), (4) Dycal (Quick setting Calcium hydroxide: LD Caulk Co., Milford, USA). 희생전 90일, 30일, 7일 전에 각 복조재별로 3개씩의 와동을 충전하였고 비글견을 희생시키고 조직시편을 제작하였다. 시편을 H&E 염색 후 광학 현미경으로 치수염증반응과 경조직 형성 정도를 관찰하였다. MTA 군은 초기에는 경조직 형성이 관찰되지 않고 치수조직의 위축과 부분괴사가 관찰되었으나 시간이 지나면서 경조직 형성이 관찰되었다. Clearfil SE Bond군은 초기에 염증세포의 침윤과 치수세포의 괴사를 관찰할 수 있었고 시간이 지날수록 치수 세포의 괴사가 더욱 진행한 양상을 보였다. Ultra-blend 군과 Dycal 군은 MTA 군과 비슷하게 초기에는 경조직 형성을 보이지 않고 중등도의 염증반응이 관찰되었으며 시간이 지나면서 경조직 형성이 관찰되었다. MTA, 수산화칼슘제재와 광중합 수산화칼슘제재는 초기의 치수염증반응 이후 조상아세포층, 상아질교 형성을 보여 직접치수복조재로 적당하였으며, 접착성 레진은 심한 염증반응과 치수 조직의 괴사 양상을 보여 직접치수복조재로 부적당하다는 결론을 얻을 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.31.1-31.1
• /
• 2009

Carbon nanotubes (CNTs) are attractive material because of their superior electrical, mechanical, and chemical properties. Furthermore, their geometric features such as a large aspect ratio and a small radius of curvature at tip make them ideal for low-voltage field emission devices including backlight units of liquid crystal display, lighting lamps, X-ray source, microwave amplifiers, electron microscopes, etc. In field emission devices for display applications, the phosphor anode is positioned against the CNT emitters. In most case, light generated from the phosphor by electron bombardment passes through the anode front plate to reach observers. However, light is produced in a narrow depth of the surface of the phosphor layer because phosphor particles are big as much as several micrometers, which means that it is necessary to transmit through the phosphor layer. Hence, a drop of light intensity is unavoidable during this process. In this study, we fabricated a transparent cathode back plate by depositing an ultra-thin film of single walled CNTs (SWCNTs) on an indium tin oxide (ITO)-coated glass substrate. Two types of phosphor anode plates were employed to our transparent cathode back plate: One is an ITO glass substrate with a phosphor layer and the other is a Cr-coated glass substrate with phosphor layer. For the former case, light was radiated from both the front and the back sides, where luminance on the back was ~30% higher than that on the front in our experiments. For the other case, however, light was emitted only from the cathode back side as the Cr layer on the anode glass rolled as a reflecting mirror, improving the light luminance as much as ~60% compared with that on the front of one. This study seems to be discussed about the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the cathode back side. The experimental procedures are as follows. First, a CNT aqueous solution was prepared by ultrasonically dispersing purified SWCNTs in deionized water with sodium dodecyl sulfate (SDS). A milliliter or even several tens of micro-liters of CNT solution was deposited onto a porous alumina membrane through vacuum filtration. Thereafter, the alumina membrane was solvated with the 3 M NaOH solution and the floating CNT film was easily transferred to an ITO glass substrate. It is required for CNT film to make standing CNTs up to serve as electron emitter through an adhesive roller activation.

• 박물관보존과학
• /
• 제24권
• /
• pp.117-132
• /
• 2020

미얀마 바간유적 파야톤주 사원벽화의 채색층은 다양한 요인으로 인해 손상이 발생된 상태이다. 본 연구에서는 미얀마 전통 접착제인 님(Neem) 수지를 대상으로 채색층 고착처리제로서의 적용 가능성을 확인하였다. 대조군으로 소아교와 Paraloid B-72를 선정하였으며, 원 벽화와 유사한 조건의 의사시료를 제작하여 고착제 도포 전·후 및 열화실험에 따른 변화양상을 확인하였다. 연구 결과, 님 수지는 농도가 높아짐에 따라 표면의 얼룩, 황변, 광택 등의 변화가 다른 고착제에 비해 크게 나타났으나, 4% 조건에서는 비교적 적은 변화가 확인되었다. 색도 및 광택도 역시 고착제 도포 전·후로 변화폭이 큰 것으로 확인되나, 다른 농도와 비교했을 때 4% 농도에서 낮은 경향이 확인되었다. 또한 고착강도의 경우, 님 수지의 농도가 높아짐에 따라 다른 고착제에 비해 바탕칠층 및 채색층에 대한 고착 능력이 전반적으로 우수한 점을 알 수 있었다. 따라서 환경요인에 따른 적은 표면변화, 낮은 색차 및 광택도, 우수한 고착강도의 특성들을 보았을 때 님 수지 4%의 조건에서 채색층 고착 처리제로서의 적용 가능성을 확인할 수 있었으며, 이는 향후 파야톤주 사원벽화 보존처리를 위한 기초 자료로 활용될 수 있을 것으로 사료된다.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.140-148
• /
• 2004

A novel rapid prototyping (RP) process, a full-automated transfer type variable lamination manufacturing process (Full-automated VLM-ST) has been developed. In the full-automated VLM-ST process, a vacuum chuck and a rectilinear motion system transfer the EPS foam material in the form of the plate with two pilot holes to the rotary supporting stage. The supplied material is then cut into an automated unit shape layer (AUSL) with a desired width, a desired length, a desired slope on the side surface, and a pair of reference shapes, which is called the guide shape (GS)’, including two pilot holes in accordance with CAD data through cutting in two steps using a four-axis synchronized hotwire cutter. Then, each AUSL is stacked by setting each AUSL with two pilot holes in the building plate with two pilot pins, and subsequently, adhesive is applied onto the top surface of the stacked AUSL by a bonding roller and pressure is simultaneously given to the bottom surface of the stacked AUSL. Finally, three-dimensional shapes are rapidly and automatically fabricated. This paper describes the method to generate guide shapes in AUSL data for the full-automated VLM-ST process. In order to examine the applicability of the method to generate guide shapes, three-dimensional shapes, such as a piston shape and a human head shape, are fabricated from the full-automated VLM-ST apparatus.

• Tribology and Lubricants
• /
• 제22권3호
• /
• pp.144-148
• /
• 2006

The experimental investigation was performed to find the associated changes in characteristics of fretting wear with various water temperatures. The fretting wear tests were carried out using the zirconium alloy tubes and the grids with increasing the water temperature. The tube materials in water of $20^{\circ}C,\;50^{\circ}C\;and\;80^{\circ}C$ were tested with the applied load of 20 N and the relative amplitude of $200{\mu}m$. The worn surfaces were observed by SEM, EDX analysis and 2D surface profiler. As the water temperature increased, the wear volume was decreased, but oxide layer was increased on the worn surface. The abrasive wear mechanism was observed at water temperature of $20^{\circ}C$ and adhesive wear mechanism occurred at water temperature of $50^{\circ}C,\;80^{\circ}C$. As the water temperature increased, surface micro-hardness was decreased, but wear depth and wear width were decreased due to increasing stick phenomenon. Stick regime occurred due to the formation of oxide layer on the worn surface with increasing water temperatures

• International Journal of Concrete Structures and Materials
• /
• 제8권1호
• /
• pp.83-97
• /
• 2014

This paper presents the results of an investigation aimed at developing reinforced concrete beams consisting of precast permanent U-shaped reinforced mortar forms filled with different types of core materials to be used as a viable alternative to the conventional reinforced concrete beam. To accomplish this objective, an experimental program was conducted and theoretical model was adopted. The experimental program comprised casting and testing of thirty beams of total dimensions $300{\times}150{\times}2,000mm$ consisting of permanent precast U-shaped reinforced mortar forms of thickness 25 mm filled with the core material. Three additional typical reinforced concrete beams of the same total dimensions were also cast to serve as control specimens. Two types of single-layer and double-layers steel meshes were used to reinforce the permanent U-shaped forms; namely welded wire mesh and X8 expanded steel mesh. Three types of core materials were investigated: conventional concrete, autoclaved aerated lightweight concrete brick, and recycled concrete. Two types of shear connections between the precast permanent reinforced mortar form and the core material were investigated namely; adhesive bonding layer between the two surfaces, and mechanical shear connectors. The test specimens were tested as simple beams under three-point loadings on a span of 1,800 mm. The behavior of the beams incorporating the permanent forms was compared to that of the control beams. The experimental results showed that better crack resistance, high serviceability and ultimate loads, and good energy absorption could be achieved by using the proposed beams which verifies the validity of using the proposed system. The theoretical results compared well with the experimental ones.

• 마이크로전자및패키징학회지
• /
• 제11권1호
• /
• pp.1-6
• /
• 2004

자동차 전장품의 시험환경 조건이 엄격해짐에 따라, 전장품 개발 기술자들은 이에 부합하는 성능, 신뢰성, 비용 등을 고려한 보다 효과적인 제품 설계를 위해 노력하고 있다. 본 논문에서는 ECM 알루미나 기판의 플라즈마 세척 영향과 리플로우 후 Sn-37wt%Pb 솔더와 패드 접합부 계면에서 형성되는 금속간 화합물을 관찰하였다. 기판의 플라즈마 세척은 계면 접착력을 저해하였던 C에 의한 유기 잔류물 층이 제거되어 계면 접착력을 향상시키는 효과가 있다. 또한 AFM 분석 결과 도체 패드의 표면 거칠기는 304 nm에서 330 m로 증가하였다. 리플로우 과정에서 솔더와 TiWN/Cu 패드 계면에서 형성된 $Cu_6/Sn_5$는 리플로우 횟수가 증가할 수록 결정립의 크기도 조대화되었다. 솔더와 Ag-Pd 도체패드 계면에서는 세포질 형태의 $Ag_3Sn$화합물이 관찰되었다. $Ag_3Sn$은 지름이 약 0.1∼0.6 $\mu\textrm{m}$이며, 솔더 내부에서는 침상 모양도 관찰되었다.

• 비파괴검사학회지
• /
• 제26권5호
• /
• pp.343-352
• /
• 2006

본 논문에서는 금속 연소관, 단열 고무 그리고 내열 복합재로 구성된 연소관 조립체의 접착 체결 상태를 확인하기 위해 변형률, 음향방출 신호 그리고 초음파 시험자료를 이용한 비파괴 시험 방법이 제시되었다. 또한 내압 상태에서 연소관 조립체의 각 계면 접착 상태를 정량적으로 평가하기 위해 유한요소 해석이 수행되었다. 공압 시험 중 계측한 변형률 값과 음향방출 신호 상관관계 연구를 통해 연소관 조립체의 접착 건전성 평가가 가능했다. 그리고 연소관 조립체의 여러 접착 계면 중 첫 번째 계면인 연소관과 고무간의 접착은 초음파 방법으로 분류하였다. 이러한 연구를 통해 연소관 조립체의 모든 접착 계면은 1) 초기 완전 미접착, 2) 공압 시험 중 완전 접착 분리, 3) 공압 시험 중 부분 접착 분리, 4) 완전 접착 등 4가지 형태로 분류 및 검출되었다.