• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.597-600
• /
• 2003

The development and maintenance of a sound bond are an essential requirements of concrete repair and replacement. The bond property of a bonded overlay to its substrate concrete during the lifetime is one of the most important performance requirements which should be quantified. A standard or a verified bond strength measurement method is required at field for screening, selecting materials and quality control for overlay or repair materials. This study compares the nipple pipe direct tensile test, flexural adhesion test, and core pull-off test with their test results. Substantial differences in the failure stresses of three test methods were attributed to their different geometries and loading conditions. From these comparison and investigation, core pull-off test was relatively good because the coefficient of variation values were about 2%. It would be suitable for use in-situ because of its simplicity and accuracy.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.6 s.237
• /
• pp.852-859
• /
• 2005

Molecular dynamics simulations of nanoimprint lithography in which a stamp with patterns is pressed onto amorphous poly-(methylmethacrylate) (PMMA) surface are performed to study the deformation of polymer. Force fields including bond, angle, torsion, inversion, van der Waals and electrostatic potential are used to describe the intermolecular and intramolecular force of PMMA molecules and stamp. Periodic boundary condition is used in horizontal direction and Nose-Hoover thermostat is used to control the system temperature. As the simulation results, the adhesion forces between stamp and polymer are calculated and the mechanism of deformation are investigated. The effects of the adhesion and friction forces on the polymer deformation are also studied to analyze the pattern transfer in nanoimprint lithography. The mechanism of polymer deformation is investigated by means of inspecting the indentation process, molecular configurational properties, and molecular configurational energies.

• Journal of Surface Science and Engineering
• /
• v.29 no.6
• /
• pp.691-694
• /
• 1996

Two models of scratch testers developed recently are applied to the adhesion measurement of thin coatings. In both models the critical load is determined from the frictional irregularity when coated surface is broken in the scratching process. One model is effective for coatings thicker than 1m and the other for thin coatings down to $0.1\mu\textrm{m}$. The mechanism and the measurement principle of these testers are described. High sensitivity and good reproducibility of the measurement are attained primarily by the employment of new detection devices. These testers are even more useful for the quality control and the inspection of commercial products of coatings because only a small area of specimen is required for the test.

• BMB Reports
• /
• v.47 no.12
• /
• pp.655-659
• /
• 2014

Integrin-mediated cell adhesion is important for development, immune responses, hemostasis and wound healing. Integrins also function as signal transducing receptors that can control intracellular pathways that regulate cell survival, proliferation, and cell fate. Conversely, cells can modulate the affinity of integrins for their ligands a process operationally defined as integrin activation. Analysis of activation of integrins has now provided a detailed molecular understanding of this unique form of "inside-out" signal transduction and revealed new paradigms of how transmembrane domains (TMD) can transmit long range allosteric changes in transmembrane proteins. Here, we will review how talin and mediates integrin activation and how the integrin TMD can transmit these inside out signals.

• Radioisotope journal
• /
• v.21 no.4
• /
• pp.46-54
• /
• 2006

Biocompatible and biodegradable hydrogels based on carboxymethyl cellulose(CMC) and polyethyleneglycol(PEG) were prepared far physical barriers for preventing surgical adhesions. These interpolymeric hydrogels were synthesized by a gamma irradiation crosslinking technique. The 1Scmxl.Scm of cecal serosa and adjacent abdominal wail were abraded with bane burr until tbe serosal surface was disrupted and hemorrhagic but not perforated. and the serosa of tbe cecum was sutured to the abdominal wall in 5mm apart from the injured sire. The denuded cecum was covered with either CMC/PEG hydrogels or solution from CMC/PEG hydrogel. Control rat serosa was not covered. Two weeks later. the rats were sacrificed and adhesion was scored on a 0-5 scale. No treatment showed the significantly higher incidence of adhesions than either CMC/BEC hydrogels or solution from CMC/PEG hydrogel. In conclusion, these studies demonstrate that CMC/BEG hydrogels have a function of prevention of intra abdominal adhesion in a rat model.

• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.182-187
• /
• 2019

To improve the mechanical properties of glass-fiber-reinforced polypropylene (PP) composites through interfacial adhesion control between the PP matrix and glass fiber, the surface of the glass fiber was modified with PP-graft-maleic anhydride (MAPP). Surface modification of the glass fiber was carried out through the well-known hydrolysis-condensation reaction using 3-aminopropyltriethoxy silane, and then subsequently treated with MAPP to produce the desired MAPP-anchored glass fiber (MAPP-a-GF). The glass-fiber-reinforced PP composites were prepared by typical melt-mixing technique. The effect of chemical modification of the glass fiber surface on the mechanical properties of composites was investigated. The resulting mechanical and morphological properties showed improved interfacial adhesion between the MAPP-a-GF and PP matrix in the composites.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.10
• /
• pp.1005-1013
• /
• 2009

In this paper, the performance improvement of a decentralized brake system for railway rolling stocks is investigated. In order to verify the effectiveness of the decentralized brake system, it is compared to the truck unit brake system which has only one control unit per a truck. The adaptive sliding mode control scheme is used to realize a robust anti-slip brake control system. Through computer simulations, it is verified that the decentralized brake system has better braking performance than the truck unit brake system.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.214-230
• /
• 2014

This paper presents a high performance sensor less control four motorized wheels for electric vehicle. Firstly, we applied a sensor less master-slave DTC based control to both the two in wheel motors by using sliding mode observer for its quick response and its high reliability in electric vehicle application. Secondly, to overcome the possible loss of adherence of one of the four wheels which is likely to destabilize the vehicle a solution is proposed in this paper. Thirdly, a Fuzzy logic anti-skid control structure well adapted to the non-linear system is used to overcome the main problem of power train system in the wheel road adhesion characteristic. Various Simulation results have been include in this paper to show that the proposed control strategy can prevent vehicle sliding and show good vehicle stability on a curved path.

• THE JOURNAL OF KOREAN ORIENTAL ONCOLOGY
• /
• v.5 no.1
• /
• pp.19-32
• /
• 1999

To evaluate the antitumor activity and antimetastatic effects of Kamigumgusingihwan(KGSH) studies have ken done. The results were obtained as follows: 1. KGSH extracts exhibited a weak cytotoxicity against A549, SK-OV-3, B16-F10, and SK-MEL-2 cell lines. But exhibited potent cytotoxicity against P388 cell line in a dose-dependent manner. 2. The concentration inhibiting adhesion of A549, to complex extracellular matrix up to below 30% of control was recognized at $10^{-3}g/ml$ of KGSH 3. KGSH extracts showed a weak inhibitoty effect on DNA topo-isomerase I from calf thymus. 4. The T/C% was 137% in KGSH treated group in S-180 bearing ICR mice. 5. In pulmonary colonization assay, a number of colonies in the lungs were decreased significantly in KGSH treated group as compared with control group. 6. In hematological changes in B16-BL6 injected C57BL/6, numbers of WBC were decreased insignificantly in KGSH treated groups, and also those of platelet were increased insignificantly in KGSH treated groups as compared with control. 7. In CAM assay, KGSH extracts inhibited angiogenesis at $15{\mu}g/egg $concentration significantly as compared with control. Taken together these results, it is strongly demonstrated that KGSH significantly suppressed tumor metastasis by blocking cell adhesion to extracellular matrix. Therefore, KGSH is expected to be clinically a potent antimetastatic drug for the prevention and treatment of cancer.

• Journal of Chest Surgery
• /
• v.43 no.6
• /
• pp.596-601
• /
• 2010

Background: This study was designed to evaluate the efficacy of a mixture of hyaluronic acid and sodium carboxymethyl cellulose ($Guardix-sol^{(R)}$) on experimental pericardial adhesion. Material and Method: Thirty rats were divided into 2 groups of 15 rats each and pericardial mesothelial injury was induced during surgery by abrasion. In the control group, blood and normal saline were administered into pericardium; in the test group, blood and HA-CMC solution were administered. Pericardial adhesions were evaluated at 2 weeks (n=5), 4 weeks (n=5), and 6 weeks (n=5) after surgery. The severity of adhesions was graded by macroscopic examination, and the adhesion tissue thickness was analyzed microscopically with Masson trichrome stain and an image processing program. Result: The test group had significantly lower macroscopic adhesion scores ($2.9{\pm}0.6$ : $3.9{\pm}0.4$, p<0.000) compared with the control group. For microscopic adhesion tissue thickness, the test group had lower scores compared with the control group, but this difference was not statistically significant ($91.73{\pm}49.91$ : $117.67{\pm}46.4$, p=0.106). Conclusion: We conclude that an HA-CMC solution ($Guardix-sol^{(R)}$) reduces the formation of pericardial adhesions in this animal model.