• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.105-117
• /
• 2003

The purpose of this research aimed at performing the easy design. and also the easy on-the-job application or the maintenance interval determination methodology by presenting the determining model or the optimizing maintenance interval in TBM for the preventive maintenance or facility TBM(time-based maintenance) as the preventive maintenance requires the adequate determination or the maintenance interval. The maintenance interval or TBM shall be applied differently for the each interval such as He patrol inspection, maintenance, overhaul inspection. exchange. And it is based on the composition level of equipment. The already informed theories or interval determination methodology for the patrol inspection. repair. and overhaul inspection are difficult for adopting because or the several restriction problems in applying the maintenance schemes as the theory So, the model for determining the optimizing exchange interval or part, maintenance interval of auxiliary machine, unit equipment etc. was presented to apply in the maintenance easily and appropriately.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1303-1310
• /
• 2000

GPS carrier phase is supposed to provide the tool for the most precise 3 dimensional positioning information. The FAST, an OTF technique, has been developed by the GPS System Laboratory of Konkuk University, and has been shown several millimeter level accuracy in root-mean-square sense. This OTF's high precision positioning capability provides an adequate tool of low frequency vibration monitoring of large structures. In this paper, the possibility of vibration measurement of a cantilever beam using FAST has been tested, which is supposed to be extended to more practical applications. The results of the experiment have been compared with those by a strain gage and laser sensor.

• 한국산업보건학회지
• /
• 제17권4호
• /
• pp.300-309
• /
• 2007

Although parathion is an organophosphate pesticide being legally applied for the purpose of agriculture and is being manufactured, parathion in the air and urinary p-nitrophenol, a metabolite of parathion, were not analysed in Korea. Air of the parathion manufacturing workplace was sampled by OVS-2 tubes using NIOSH 5600 and spot urine of workers was sampled at the end of shift. Parathion and urinary p-nitrophenol were analysed by GC/MS (5973 MSD connected with Agilent 6890 GC) and the protocol was included in this study. It was found that this protocol should be so sensitive that determining parathion in the air and urinary p-nitrophenol below level of ACGIH TLV and BEI be adequate. Another finding was that total sampling volume of air of NIOSH 5600 of 240 L should be adjusted to be less than 120 L due to breakthrough.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.502-507
• /
• 1990

The robot operation by teach playback is easy and was widely used for simple jobs performed by a simple robot manipulator. However, as robots and their control systems and tasks become more and more sophisticated, such a simple robot operation is no longer adequate and programming languages capable for the complicated systems and tasks are greatly needed. In this paper, a high-level robot-specific programming language, SAITEL, is presented. It is an interpreter, based on Assembly, and has form similar to BASIC. SAITEL is easy to use for people who are not skilled programmers, and provides the capability to define robot task very conveniently. SAITEL was implemented on a direct drive SCARA robot developed in the Samsung Advanced Institute of Technology, and proved to be very useful for the operation of SCARA-type robots. It can be used also for other types of robots by slight modification.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.634-638
• /
• 1990

In this paper, the architecture of a dataflow logic solving processor for programmable logic controller is proposed. As the proposed DFLSP (dataflow logic solving processor) is designed based on the dataflow architecture, it has inherently concurrent processing and data synchronization capabilities. The proposed DFLSP is adequate for high speed programmable logic controllers and gets rid of data synchronization problem in hardware level. The performance of the proposed DFLSP is analyzed using computer simulations and prototype hardware. With single processing element, the logic solving time is 144 usec per 1K steps of logic program and with eight processing elements, the logic solving time is 23 usec per 1K steps of logic program with reasonable assumptions.

• 한국전자파학회논문지
• /
• 제15권3호
• /
• pp.251-257
• /
• 2004

연안에서 선박의 안전한 항행과 관제를 위해 선박간 또는 선박과 관제소간의 항행정보를 교환할 수 있도록 하는 AIS(Automatic Identification System)는 운용 방식(Low setting, High setting)에 따라 서로 다른 송신 출력 크기를 가지며, 1 ms(Transmitter Setting Time)안에 각각의 최종 출력 크기 의 20% 이내로 도달하도록 하는 동작 성능을 요구한다. 본 논문에서는 이와 같은 AIS의 송신 출력 특성에 부합할 수 있도록 전력 증폭기 모듈에 적절한 궤환 회로를 제안하고 이를 설계, 제작하였다.

• 항공우주기술
• /
• 제12권2호
• /
• pp.131-139
• /
• 2013

본 논문은 소프트 CPU 기반의 소형 전장품 설계 및 개발에 대한 것을 다루고 있다. 소프트 CPU는 소프트웨어를 이용한 로직 합성을 통해서 FPGA 내부에 구성되는 마이크로 프로세서이다. 소형 전장품 개발을 위해 소프트 CPU중 Nios-II 프로세서를 적용하여 다양하고, 다시 구성할구 있고, 다시 조립 가능한 하부 모듈로 설계하고 개발하였다. 모듈 구조로 구성하기 위해서 메인 보드와 하부 보드 모두 전원과 데이터 버스가 공통으로 사용할 수 있도록 구성하였고, 선택적으로 사용할 수 있도록 하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.412-417
• /
• 2008

In a traditional topology optimization method, material properties are usually distributed by finite element density and visualized by a gray level image. The distribution method based on element density is adequate for a great mass of 2-D topology optimization problems. However, when it is used for 3-D topology optimization, it is always difficult to obtain a smooth model representation, and easily appears a virtualconnect phenomenon especially in a low-density domain. The 3-D structural topology optimization method has been developed using the node density instead of the element density that is based on SIMP (solid isotropic microstructure with penalization) algorithm. A computer code based on Matlab was written to validate the proposed method. When it was compared to the element density as design variable, this method could get a more uniform density distribution. To show the usefulness of this method, several typical examples of structure topology optimization are presented.

• 한국응용과학기술학회지
• /
• 제16권3호
• /
• pp.223-230
• /
• 1999

This study was performed to determine optimum level of ethanol intake with weanling male rats. The weanling rats and the experimental diets were divided into 5 groups, control, A, B, C, D group in according to the levels of ethanol intake for 10 weeks. In the result of their serum analyses, we suggest that an adequate intake of ethanol is 1.47ml/kg/day. If body weight of any man is 60kg, he can drink about 90ml(1.47*60=88.2) ethanol/day. It corresponds to 360ml [90=360*(25/100)] of 25% SOJU.

• 한국생활과학회지
• /
• 제24권2호
• /
• pp.237-253
• /
• 2015

The purpose of this study was to examine the relative deprivation of the households in poverty, comparing with the households in non-poverty, and to find out the characteristics of household groups by the level of relative deprivation. The data for this study was from the 6th Korea Welfare Panel Survey(KOWEPS), consisting of total 5,552 households. The results are as follows: There were statistically significant differences in the objective cost of living, the subjective minimum cost of living, and the subjective adequate cost of living between households in poverty and households in non-poverty. There was statistically significant difference in the relative deprivation between households in poverty and households in non-poverty. Poverty was the factor for the relative deprivation of households.