• Journal of the Korea Society for Simulation
• /
• v.19 no.3
• /
• pp.1-6
• /
• 2010

Simulation analysis may be the essential means to either evaluate performance of systems or optimize system parameters for new design. Including many variations for design and implementation, MANET (Mobile Ad-hoc NETwork) is one target area of such an analysis. Since every node, however, included in the network has mobility, one MANET could be overlapped or merged with another one which use a different transport protocol. In order to communicate among nodes in this case, the new merged network should configure paths and addresses in advance. Configuring paths and addresses generates much overheads which ultimately cause delay in communicating data. Performance analysis is required to improve the data transport performance by minimizing overheads. This paper proposes a sound address auto-configuration method which is based on an on-demand manner and then presents modeling and performance analysis of the method. NS-2 simulation results verify that the proposed method can not only alleviate overheads, which are inevitably generated for address auto-configuration processes, and but also decentralize them in time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.1051-1054
• /
• 2013

Because of the limitations of traditional IPv4 address, the adoption of IPv6 has been accelerated. In IPv6 system, each host can obtain the IP address automatically using auto-configuration functionality, which is one of the features of IPv6. However, the auto-configuration functionality can allow a malicious user to get its IPv6 address and access the network without permission, the IP address management functionality becomes more important than IPv4. In this paper, we propose an IPv6 address management system based on IP agents, which protects the unauthorised users from accessing the network and redirects the web access of those users to a specific web page to induce them to access the network after installing the IP agents.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.1041-1044
• /
• 2006

This paper proposes a dynamic IP address configuration (DAC) scheme for mSCTP handover, which exploits the information from the link layer to support SCTP handover between heterogeneous access networks. The proposed DAC scheme enables a mobile terminal to automatically add a new IP address in the newly visited region, change the primary path, and delete the old IP address so as to support the mSCTP handover. For experimental analysis of mSCTP handover, we consider the handover scenarios for 3G-BWA and 3G-WLAN over Linux platforms. From experimental results, it is shown that the throughput and handover latency of the mSCTP handover would be affected by the timing of primary-change and the overlapping period.

• Journal of KIISE:Information Networking
• /
• v.31 no.6
• /
• pp.659-672
• /
• 2004

A Mobile Ad hoc Network (MANET) is a group of independent mobile computing nodes that consist of a multi-hop wireless network without a central administration or any infrastructure. Every node that wants to join a MANET must obtain an address for communication. Having a centralized DHCP server that provides addresses to nodes, we can easily and automatically obtain addresses. However, a MANET lacks any fixed infrastructure such as a DHCP server. We therefore propose a distributed address autoconfiguration approach for a MANET using a reserved address and optimistic Duplicated Address Detection (DAD). The reserved address helps to reduce the allocation latency, and the optimistic DAD guarantees the uniqueness of addresses and lessens communication overhead. We then suggest methods of handling network partition and network merging situations, and go on to evaluate our approach through simulations. The simulation result shows that our scheme guarantees the uniqueness of allocated address and considerably improves allocation latency and communication overheads.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.544-548
• /
• 2004

DHCP(Dynamic Host Configuration Protocol) is a protocol which dynamically allocates an IP address and/or host configuration parameters to a host. The DHCP client's address can be changed dynamically any time. For the possible communication with other system, the DHCP client has to inform its address to the DNS system with dynamic update facility. But the DNS dynamic update has a problem related to the security. So we proposed the efficient mechanism for the secure integration of DHCP and DNS by using DNS security extensions. The system also uses the DNS server as the certificate repository for the storing & retrieval of each other's certificate.

• International journal of advanced smart convergence
• /
• v.12 no.3
• /
• pp.1-12
• /
• 2023

A public address (PA) system installed in a building is a system that delivers alerts, announcements, instructions, etc. in an emergency or disaster situation. As for the products used in PA systems, with the development of information and communication technology, PA products with various functions have been introduced to the market. PA systems recently launched in the market may be connected through a single network to enable efficient management and operation, or use voice recognition technology to deliver quick information in case of an emergency. In addition, a system capable of locating a user inside a building using a location-based service and guiding or responding to a safe area in the event of an emergency is being launched on the market. However, the new PA systems currently on the market add some functions to the existing PA system configuration to make system operation more convenient, but they do not change the complex PA system configuration to reduce facility costs, maintenance, and management costs. In this paper, we propose a novel PA system configuration for buildings using audio networks and control hierarchy over peer-to-peer (Anchor) technology based on audio over IP (AoIP), which simplifies the complex PA system configuration and enables convenient operation and management. As a result of the study, through the emergency signal processing algorithm, fire broadcasting was made possible according to the detection of the existence of a fire signal in the Anchor system. In addition, the control device of the PA system was replaced with software to reduce the equipment installation cost, and the PA system configuration was simplified. In the future, it is expected that the PA system using Anchor technology will become the standard for PA facilities.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.6
• /
• pp.87-93
• /
• 2012

In this paper, we propose an analog-to-digital converter to set the address of a I2C slave chip. The proposed scheme converts a fixed voltage between 0 and VDD to the digital value which can be used as the address of the slave chip. The rising time and the falling time are measured with digital counter in a serially connected RC circuit, while the circuit is being charged and discharged with the voltage to be measured. The ratio of the two measured values is used to get the corresponding digital value. This scheme gives a strong point which is to be implementable all the parts except comparator using digital logic. Although the method utilizes RC circuit, it has no relation with the RC value if the quantization error is disregarded. Experimental result shows that the proposed scheme gives 32-level resolution thus it can be used to configure the address of the I2C slave chip.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.3
• /
• pp.266-284
• /
• 2009

The challenges of rapidly growing numbers of mobile nodes in IPv6-based networks are being faced by mobile computing researchers worldwide. Recently, IETF has standardized Mobile IPv6 and Fast Handover for Mobile IPv6(FMIPv6) for supporting IPv6 mobility. Even though existing literatures have asserted that FMIPv6 generally improves MIPv6 in terms of handover speed, they did not carefully consider the details of the whole handover procedures. Therefore, in conventional protocols, the handover process reveals numerous problems manifested by a time-consuming network layer based movement detection and latency in configuring a new care of address with confirmation. In this article, we study the impact of the address configuration and confirmation procedure on the IP handover latency. To mitigate such effects, we propose a new scheme which can reduce the latency taken by the movement detection, address configuration and confirmation from the whole handover latency. Furthermore, a mathematical analysis is provided to show the benefits of our scheme. In the analysis, various parameters are used to compare our scheme with the current procedures, while our approach is focused on the reduction of handover latency. Finally, we demonstrate total handover scenarios for the proposed techniques and discussed the major factors which contribute to the handover latency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.489-491
• /
• 2009

Recently, a range of diverse networks are undergoing speedy evolution and inspiring variety applications. Among many networks, mobile Ad-Hoc networks (MANETs) are active working with a part of routing protocols. But, the majority of routing protocols have required a unique identifier, such as an IP address. At this while, IP address assignment scheme in MANET remains unsolved. When a centralized agent server is not exist, IP address is an critical issue such as a single MANET. This paper look over previous work about basic principles, also we suggest simple solution to overcome the power of two ($2^m$).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.2
• /
• pp.179-192
• /
• 2019

Additional frequencies are allocated in maritime digital data exchange to alleviate overload of the VHF data link. The shipborne ad-hoc network (SANET) for this frequencies was subsequently proposed, which provides various IP-based services to ships on behalf of satellite communications. In SANET, a ship should determine its own IP address to achieve IP connectivity to the shore. Accordingly, this paper proposes a SANET configuration (SANETconf) protocol as an IP configuration protocol. SANETconf propagates non-overlapping IP addresses across the network from the shore to ships. A ship obtains its IP address by exchanging Request and Response messages with its neighbors. Therefore, SANETconf eliminates the process of DAD and managing the movement of ships. Extensive simulations were performed to verify the applicability of SANETconf. Based on results, 85% of the ships can determine their own IP address within one frame. Also, SANETconf has a high resource efficiency by using 0.024 percent of resources for IP configuration.