• Spatial Information Research
• /
• 제22권5호
• /
• pp.99-107
• /
• 2014

연안관리 계획은 연안을 이용방향에 따라 4개의 구역으로 분류하도록 하고 있는데, 각 구역별 연안이용행위의 금지 및 지원사항을 정하도록 하고 있다. 연안구역을 설정할 경우 해당지역이 국토이용계획 및 도시계획에 따라 지역 및 지구로 이미 지정되어 있어 추가적인 구역 설정시 이 같은 점이 중요한 검토기준이 되기도 하지만 경우에 따라서는 상충되는 결과를 초래할 수도 있다. 따라서, 연안관리에 있어서의 범위와 이용구역의 설정에 대한 검토 요소를 분석하고, 기존의 지역 지구지정 현황과의 상충문제 해결을 위한 방안을 도출하기 위한 노력이 필요하다. 보다 정확하고 효율적인 연안관리를 위해 해양에서의 해양공간계획과 토지에서 활용되는 도시계획제도와 지적제도를 활용하여 연안지역을 등록 관리할 필요성이 있다. 이를 위해 국토이용계획, 해양공간계획 등을 종합한 계획을 수립할 수 있는 별도의 협의체 기관 검토, 다른 개별법이 정하고 있는 각종 구역 지역의 지정 상충 검토, 연안해역의 범위 설정(3해리 내), 연안등록 방안 및 등록 대상 등을 모색하였다.

• 한국실내디자인학회논문집
• /
• 제25권1호
• /
• pp.93-100
• /
• 2016

Long-life housing means a housing which structural members (Support) such as columns and floor are maintained for a long period of time and the housing can be used for approximately 100 years by replacing components (Infill) such as walls and furniture. The government established "Certification standards of long-life housing construction" on December 24, 2014, requiring the long-life housing certification for construction of apartment houses for over 1,000 households. However, it is necessary to prepare an incentive measure which could be granted to construction related personnel and housing owners due to the effectiveness of such system and recognition that the initial construction cost of long-life housing is high. The purpose of this study is as follows. First, the reasons and necessity of long-life housing cost increase for each construction company, housing owner, infill component manufacturer and designer which are long-life housing related personnel are determined. The direction of incentive grant for supplying long-life housing based on the determined items is established. The result of this study is as follows. First, a special treatment which is higher than the alleviation of construction standards according to the previous ordinance is necessary for construction companies to secure the business feasibility. Also, incentives such as the provision of service space and wide balcony are necessary to improve the preference level of parceling out. Second, financial incentives such as financial support for housing purchase, reduction and exemption of tax (acquisition tax and registration tax), and support of maintenance cost are required for house owners. Third, it is essential to increase opportunities to participate in the market for infill component manufacturers by applying additional points for PQ. Fourth, it is needed to provide compensation for additional human resource and time at the time of designing to designers by preparing the long-life housing design cost standards.

• 한국정보통신학회논문지
• /
• 제20권12호
• /
• pp.2289-2296
• /
• 2016

사용자 계정 발급 시에 적용되는 패스워드 생성 규칙이 웹사이트 별로 다른 경우가 많아 사용자가 패스워드를 기억하기 힘들고 잦은 입력 오류로 인해 패스워드 재설정 단계를 거쳐야 하는 시간 낭비를 초래한다. 이러한 문제를 해결하기 위해 본 논문에서는 사용자 인증 단계에서 패스워드가 일치하지 않는 경우 패스워드 재설정 단계를 거치는 것이 아니라 회원 가입시에 부가적으로 등록한 기본 패스워드와 개인 정보 기반의 추가적인 인증을 거쳐 로그인할 수 있도록 하는 새로운 인증 방식을 제안하였다. 이 방식은 기존의 방식과 동등한 수준의 보안성을 제공하면서도 패스워드 재설정에 따르는 트랜잭션 수나 소요 시간이 절반 정도에 불과해 효율적인 방식으로 볼 수 있다.

• 디지털콘텐츠학회 논문지
• /
• 제19권2호
• /
• pp.237-243
• /
• 2018

공공지하시설물은 대부분 지하에 매립되어 있어 지하시설물에 대한 정확한 도면이 있어도 현장작업자가 지하시설물의 위치를 정확히 인지하기 어렵다. 이러한 지하시설물의 위치정보를 현장에서 직관적으로 파악하기 위해 증강현실을 이용하는 방법이 연구되었으나 공공지하시설물 공간정보는 2차원의 형태로 구축되어 있어 현장에서 증강현실로 이용하기 위해서는 3차원 객체 모델 데이터베이스 구축 작업이 필요하다. 본 연구에서는 기 구축되어 있는 2차원 지하시설물 데이터를 추가적인 3차원 데이터베이스 구축 없이 3차원 증강현실 데이터로 자동 변환하여 활용할 수 있는 모바일 어플리케이션 기반의 증강현실 시스템을 개발하였다.

• Korean Journal of Radiology
• /
• 제23권3호
• /
• pp.355-369
• /
• 2022

Objective: To evaluate the completeness of the reporting of systematic reviews and meta-analyses published in a general radiology journal using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020 guidelines. Materials and Methods: Twenty-four articles (systematic review and meta-analysis, n = 18; systematic review only, n = 6) published between August 2009 and September 2021 in the Korean Journal of Radiology were analyzed. Completeness of the reporting of main texts and abstracts were evaluated using the PRISMA 2020 statement. For each item in the statement, the proportion of studies that met the guidelines' recommendation was calculated and items that were satisfied by fewer than 80% of the studies were identified. The review process was conducted by two independent reviewers. Results: Of the 42 items (including sub-items) in the PRISMA 2020 statement for main text, 24 were satisfied by fewer than 80% of the included articles. The 24 items were grouped into eight domains: 1) assessment of the eligibility of potential articles, 2) assessment of the risk of bias, 3) synthesis of results, 4) additional analysis of study heterogeneity, 5) assessment of non-reporting bias, 6) assessment of the certainty of evidence, 7) provision of limitations of the study, and 8) additional information, such as protocol registration. Of the 12 items in the abstract checklists, eight were incorporated in fewer than 80% of the included publications. Conclusion: Several items included in the PRISMA 2020 checklist were overlooked in systematic review and meta-analysis articles published in the Korean Journal of Radiology. Based on these results, we suggest a double-check list for improving the quality of systematic reviews and meta-analyses. Authors and reviewers should familiarize themselves with the PRISMA 2020 statement and check whether the recommended items are fully satisfied prior to publication.

• 한국해양공학회지
• /
• 제32권2호
• /
• pp.106-115
• /
• 2018

The forward and afterward parts of ships and offshore structures are designed to improve the fuel consumption performance. These are made of curved plates with a large thickness. If a fabricated curved plate has some dimensional errors, a lot of additional cost is incurred in the assembly process. Thus, an accurate dimensional assessment is very important for fabrication. In this paper, we propose an assessment method for the dimensional quality management of curved plates. This can be applied to data measured using a variety of three-dimensional instruments, with boundary measurement points automatically classified and sorted to create a measurement surface. The assessment is evaluated after matching the CAD surface and the measured surface considering constrained conditions. The fabrication assessment is evaluated as a probability of how much the tolerance is satisfied.

• 대한산업공학회지
• /
• 제25권3호
• /
• pp.342-350
• /
• 1999

Two location algorithm (TLA) considers two location areas (LAs) to track the location of a mobile station (MS). The TLA significantly outperforms the single location algorithm when the call-to-mobility ratio (CMR) is low (i.e., the user moves more frequently than to receive calls). However, because of the paging cost for the users moving back to the previously visited LA, the performance of the TLA degrades when the CMR is high. To reduce those paging cost, we propose the new algorithm called TLA with call information (TLAC). In TLAC, we use the location information of the MS within the setup message when the MS originates a call in the previously visited LA. Through the setup message, the system can know the exact location of the MS without the additional location registration operation, and the paging cost for the arriving calls in the visited LA can be reduced. An analytical model is proposed to compare the TLAC and previous TLA protocol. Our study indicates that the TLAC always guarantees better performance than the TLA. We also observe that the TLAC is much better than the TLA when the CMR is high.

• 무역상무연구
• /
• 제43권
• /
• pp.397-422
• /
• 2009

Electronic trade reduces additional costs generated from the issuing and management of paper documents, and overcomes the physical limitations of commercial transactions as well as the geographical and time limitations resulting from trading with foreign countries. These characteristics of electronic trade guarantees better and more effective global marketing for companies. In addition, by expanding relative superiority of large corporations to medium-small sized companies, many medium-small companies have shown great interest in electronic trade to promote its exporting businesses, and implementing changes to facilitate electronic trade into their business system. Therefore, it is expected that the electronic trade will be more widely distributed and utilized by businesses of all sizes in the future. The adaptation and implementation of the electronic trade system can only have prosperous effects when there is a high efficiency in the utilization and service process of the concerned company. Under this premise, this research first examined electronic trade, characteristics of the company and information utilization as the key elements to determine the effectiveness of the utility aspect. Then it examines confirmation of product demand, registration of revenues, and authorization as the key elements to determine the level of service process.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권sup2호
• /
• pp.1-5
• /
• 2016

To reduce tobacco use and related harm in Korea, telephone based cessation services (Quitlines) began full operation to provide regular behavioral counseling for smoking cessation in 2006. After registration in the cessation program, at least 21 calls per year are given to each client to help quit and encourage maintenance. Tailored programs for males, females, and adolescent smokers have been offered taking into account smokers' characteristics and smoking behavior. Mailing self-help quit packs and e-mail and SMS services are allowable as additional services.A total of 23,201 smokers were registered on the Quitline program from 2006 to 2014. In 2014, an average of 13,343 calls per month have been received by 28 coaches, the 1 year abstinence rate of clients is 26%, and clients' satisfaction rate is 81.6%. After introduction of the call system in 2007, client convenience and effective operations have been achieved with high technology support of a computer-based telephone system. Systematic education and evaluation programs for quit coaches have contributed to quality assurance of the services. Currently, research into development of new programs and evaluation of Quitline performance is being undertaken. A Comprehensive Multi-channel Cessation Center (CMCC) has been suggested and is now planned as a next step in the national program for smoking cessation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권1호
• /
• pp.511-535
• /
• 2017

Internet banking is one of many services provided by financial institutions that have become very popular with an increasing trend. Due to the increased amount of usage of the service, Internet banking has become a target from adversaries. One of the points that are at risk of an attack is the login process. Therefore, it is necessary to have a security mechanism that can reduce this risk. This research designs and develops a multi-factor authentication protocol, starting from a registration system, which generates authentication factors, to an actual authentication mechanism. These factors can be categorised into two groups: short term and long term. For the authentication protocol, only three messages need to be exchanged between a client and a financial institution's server. Many cryptographic processes are incorporated into the protocol, such as symmetric and asymmetric cryptography, a symmetric key generation process, a method for generating and verifying digital signatures. All of the authentication messages have been proved and analysed by the logic of GNY and the criteria of OWASP-AT-009. Even though there are additional factors of authentication, users do not really feel any extra load on their part, as shown by the satisfactory survey.