• Analytical Science and Technology
• /
• 제13권1호
• /
• pp.34-40
• /
• 2000

The optimum conditions for the half-life time and residual analysis of the iminoactadine triacetate fungicide on soils were investigated by using the gas chromatography. Iminoctadine triacetate(IOTA) was extracted from soils with 2.0 M-NaOH/methanol and chloroform. The extracted IOTA was derivatized to pyrimidine hexafluroacetylacetone by the acetylation and analyzed with GC/ECD after elimination of moisture and impurities on the Sep-Pak column. From the standard addition experiments with 0.1 and 1.0 ppm, the average recoveries were ranged from 83.8 to 93.2 % and the detection limit was 0.005 ppm. The half-life time of iminoctadine triacetate in the silty clay was 30 days in the laboratory and 19.5 days in the field test whereas it was 27 days and 17.5 days for each in case of silty loam.

• Biomolecules & Therapeutics
• /
• 제19권4호
• /
• pp.498-503
• /
• 2011

The purpose of this study was to investigate the effects of nisoldipine on the pharmacokinetics of repaglinide in rats. The effect of nisoldipine on cytochrome P450 (CYP) 3A4 activity and P-glycoprotein (P-gp) were evaluated. The pharmacokinetic parameters of repaglinide were also determined in rats after oral (0.5 $mg{\cdot}kg^{-1}$) and intravenous (0.2 $mg{\cdot}kg^{-1}$) administration of repaglinide to rats without or with nisoldipine (0.3 and 1.0 $mg{\cdot}kg^{-1}$). Nisoldipine inhibited CYP3A4 enzyme activity with a 50% inhibition concentration of 5.5 ${\mu}M$. In addition, nisoldipine significantly enhanced the cellular accumulation of rhodamine-123 in MCF-7/ADR cells overexpressing P-gp. Compared to the oral control group, nisoldipine significantly increased the $AUC_{0-{\infty}}$ and the $C_{max}$ of repaglinide by 46.9% and 24.9%, respectively. Nisoldipine also increased the absolute bioavailability (A.B.) of repaglinide by 47.0% compared to the oral control group. Moreover, the relative bioavailability (R.B.) of repaglinide was 1.16- to 1.47-fold greater than that of the control group. Nisoldipine enhanced the oral bioavailability of repaglinide, which may be attributable to the inhibition of the CYP3A4-mediated metabolism in the small intestine and/or in the liver and to inhibition of P-gp in the small intestine rather than to reduction of renal elimination of repaglinide by nisoldipine. The increase in the oral bioavailability of repaglinide should be taken into consideration of potential drug interactions when co-administering repaglinide and nisoldipine.

• Journal of the Korean Chemical Society
• /
• 제37권8호
• /
• pp.695-701
• /
• 1993

Rate constants of solvolysis of 2-thiophenesulfonyl chloride were determined in aqueous binary mixtures with methanol, ethanol, acetone in water and in methanol. These data are interpreted using the equation of Grunwald-Winstein and Kivinen relationship. Also, kinetic solvent isotope effects in water and in methanol and product selectivities in alcohol-water mixtures were determined. Kinetic solvent isotope effect for hydrolysis of 2-thiopenesulfonyl chloride was 2.24 and 1.47 for methanol and water, respectively. Selectivity values for formation of ester relative to acid in ethanol-water mixtures show maximum S value. From kinetic solvent isotope effect in methanol and water, selectivity data in aqueous alcoholic solvents and solvent effects, it is proposed that the reaction channel favoured in low polarity solvents is general-base catalysis and/or is possibly addition elimination (S$_A$N) reaction pathway and in high polarity solvents iS S$_N$2 reaction mechanism.

• Bulletin of the Korean Chemical Society
• /
• 제2권2호
• /
• pp.71-75
• /
• 1981

Vacuum ultraviolet photolysis of ethyl bromide was studied at 104.8-106.7 nm (11.4-11.6 eV) in the pressure range of 0.2-18.6 torr at $25^{\circ}$ using an argon resonance lamp with and without additives, i.e., NO and He. Since the ionization potential of $CH_3CH_2Br$ is lower than the photon energy, the competitive processes between the photoionization and the photodecomposition were also investigated. The observations indicated that 50% of absorbed light leads to the former process and the rest to the latter one. In the absence of NO the principal reaction products for the latter process were found to be $CH_4, C_2H_2, C_2H_4, C_2H_6, and C_3H_8$. The product quantum yields of these reaction products showed two strikingly different phenomena with an increase in reactant pressure. The major products, $C_2H_4$ and $C_2H_6$, showed positive effects with pressure whereas the effects on minor products were negative in both cases, i.e., He and reactant pressures. Addition of NO completely suppresses the formation of all products except $C_2H_4$ and reduces the $C_2H_4$ quantum yield. These observations are interpreted in view of existence of two different electronically excited states. The initial formation of short-lived Rydberg transition state undergoes HBr molecular elimination and this state can across over by collisional induction to a second excited state which decomposes exclusively by carbon-bromine bond fission. The estimated lifetime of the initial excited state was ${\sim}4{\times}10^{-10}$ sec. The extinction coefficient for $CH_3CH_2Br$ at 104.8-106.7 nm and $25{\circ}$ was determined to be ${varepsilon} = (1/PL)ln(I_0/I_t) = 2061{\pm}160atm^{-1}cm6{-1}$ with 95% confidence level.

• The Southeast Asian review
• /
• 제24권2호
• /
• pp.35-79
• /
• 2014

This study examines the measures for the activation and the growth of intra-regional trade in Southeast Asia taking a look at the four dimensions of tariff rates, non-tariff barriers, trade facilitations, and trade infrastructures. Utilizing a gravity model, we performed empirical analysis and discussed the policy implications with the priorities to implement. To expand the intra-regional trade in Southeast Asia it would be necessary to enhance the level of trade facilitations and provide trade infrastructures, such as ports and airports as well as cutting the tariff rates and eliminating the non-trade barriers. In particular, in the case of exports of ASEAN6 to ASEAN6 the infrastructure is the important factor. Also, in the case of the exports of ASEAN6 to CLMV(Cambodia, Laos, Myanmar, and Vietnam), it is expected that eliminating non-tariff barriers and enhancing trade facilitations may play important roles in the progress of intra-regional trade. These results may provide the important implications for Southeast Asian countries, which are trying to promote intra-regional trade ahead of the constitution of ASEAN Economic Community by 2015. Southeast Asian countries could be evaluated to achieve a certain level of trade liberalization and economic integration through the formation of AFTA. But in order for Southeast Asia to develop to advanced economic integrated region it requires mutual cooperations and policy harmonizations among regional countries. Also, for the elimination of non-tariff barriers, promoting trade facilitations, and providing infrastructures, the administrative, legal, and institutional measures would have to be fulfilled in advance. In addition, capital investment for constructing infrastructures would be necessary to realize the intra-regional trade expansion. However, to achieve the goal, it would require a large capital investment and highly mandated policy considerations and harmonizations among Southeast Asian countries in terms of further trade liberalization and economic integration.

• Tribology and Lubricants
• /
• 제34권6호
• /
• pp.217-225
• /
• 2018

In this study, we spray a Ni-Cr composite powder onto AISI 4340 steel using the high velocity oxygen fuel method. We subsequently subject the Ni-Cr coating (as-sprayed) to ultrasonic nanocrystal surface modification (UNSM) process to improve the tribological performance. This study aims at increasing the wear resistance and durability of the Ni-Cr coating by altering the surface integrity and microstructure via the UNSM process. The UNSM process reduces the surface roughness of the as-sprayed coating by about 64%, which is explained by observing the elimination of high peaks and valleys and filling up micro-pores. Furthermore, a change in the microstructure of the coating due to continuous high-frequency strikes to the surface by a tip can lead to an increase in hardness from about 48 to 60 HRC. Furthermore, we investigate the characterization of the friction and wear behavior of Ni-Cr coating by a ball-on-disc tribometer in the dry conditions. We determine that after the UNSM process, there is a significant reduction in the friction coefficient of the as-sprayed coating from approximately 1.1 to 0.75. This is owing to the increased hardness and smoothed surface roughness. In addition, we investigate the surface morphology and wear track of the coatings before and after the UNSM process using a scanning electron microscope, energy dispersive spectrometer, and three-dimensional laser scanning microscope. We observe that the wear track of the Ni-Cr coating after the UNSM process is lower than that of the as-sprayed one. Thus, we confirm that the UNSM process has a significant influence on the improvement of the tribological performance of the Ni-Cr composite coating.

• Clinical and Experimental Pediatrics
• /
• 제63권11호
• /
• pp.447-450
• /
• 2020

Background: Esophageal stricture (ES) is an uncommon clinic entity in pediatrics that may be congenital or acquired in childhood. Acquired noncaustic ES is very rare, and clinical features of affected patients are unknown. Purpose: We aimed to evaluate the clinical findings, and outcomes of patients with acquired noncaustic ES to aid physicians in the early referral of patients to gastroenterologists. Methods: The medical data of patients with acquired noncaustic ES who were followed in our gastroenterology clinic between January 2009 and December 2019 were reviewed. Results: Acquired noncaustic ES was found in 12 of the 4,950 patients (0.24%) who underwent endoscopy during the study period. The main symptoms were dysphagia (58.3%), vomiting (33.3%), and chronic anemia (8.3%). Chronic malnutrition and underweight were found in 66.6% of the patients. The most common etiological factors were radiotherapy, peptic reflux, and achalasia (16.6%, each), while chemotherapy, squamous-cell carcinoma (SC) of the esophagus, eosinophilic esophagitis (EoE), esophageal web, epidermolysis bullosa, and esophageal diverticulum (8.2%, each) were the other etiological factors. Patients with EoE underwent endoscopic bougie dilation in addition to steroid use and elimination diet. Patients with epidermolysis bullosa and esophageal web underwent bougie dilation. Patients with peptic reflux-related ES were initially put on antireflux therapy, but during follow-up, one patient required esophageal replacement with colonic interposition. Patients with radiotherapy-related ES recovered with medical therapy. The patient with initially underwent surgical gastrostomy and tumoral mass excision. The patient then received chemotherapy and radiotherapy and underwent jejunal interposition. Patients with achalasia underwent surgical esophagomyotomy. Conclusion: The presence of solid dysphagia, malnutrition, and an associated disease may alert physicians to the presence of ES.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제23권9호
• /
• pp.1025-1031
• /
• 2019

This study proposes a PCS that enables efficient operation of seawater pumps for ships by implementing ML-based algorithms. Seawater temperature, RPM and power consumption data are acquired from two ships with PCS, analyzed with regression analysis method, and new algorithms are presented. Using the algorithms presented, Ship A saved about 36% compared to the PCS application, and ML-based algorithms in certain sea temperatures of 19 to 27 degrees Celsius and above 32 degrees Celsius were about 1% lower than Ship A's PCS. Ship B saved about 50% compared to PCS not applied, and about 2% more than Ship B's PCS in waters above $19^{\circ}C$, a specified sea temperature. The derived data can be used to suggest the optimum pump speed and sea route. In addition, the trend of acquired data can be used to infer the performance of the pump or the timing of elimination of the MGPS when efficiency becomes poor.

• Journal of Microbiology and Biotechnology
• /
• 제28권12호
• /
• pp.1982-1991
• /
• 2018

Ethanol accumulation inhibited the growth of Saccharomyces cerevisiae during wine fermentation. Autophagy and the release of reactive oxygen species (ROS) were also induced under ethanol stress. However, the relation between autophagy and ethanol stress was still unclear. In this study, expression of the autophagy genes ATG1 and ATG8 and the production of ROS under ethanol treatment in yeast were measured. The results showed that ethanol stress very significantly induced expression of the ATG1 and ATG8 genes and the production of hydrogen peroxide ($H_2O_2$) and superoxide anion (${O_2}^{{\cdot}_-}$). Moreover, the atg1 and atg8 mutants aggregated more $H_2O_2$ and ${O_2}^{{\cdot}_-}$ than the wild-type yeast. In addition, inhibitors of the ROS scavenging enzyme induced expression of the ATG1 and ATG8 genes by increasing the levels of $H_2O_2$ and ${O_2}^{{\cdot}_-}$. In contrast, glutathione (GSH) and N-acetylcystine (NAC) decreased ATG1 and ATG8 expression by reducing $H_2O_2$ and ${O_2}^{{\cdot}_-}$ production. Rapamycin and 3-methyladenine also caused an obvious change in autophagy levels and simultaneously altered the release of $H_2O_2$ and ${O_2}^{{\cdot}_-}$. Finally, inhibitors of the mitochondrial electron transport chain (mtETC) increased the production of $H_2O_2$ and ${O_2}^{{\cdot}_-}$ and also promoted expression levels of the ATG1 and ATG8 genes. In conclusion, ethanol stress induced autophagy which was regulated by $H_2O_2$ and ${O_2}^{{\cdot}_-}$ derived from mtETC, and in turn, the autophagy contributed to the elimination $H_2O_2$ and ${O_2}^{{\cdot}_-}$.

• Tribology and Lubricants
• /
• 제34권6호
• /
• pp.270-278
• /
• 2018

STS 316L prepared by additive manufacturing (AM) exhibits deterioration of mechanical properties and wear resistance due to the presence of defects such as black-of-fusion defects, internal porosity, residual stress, and anisotropy. In addition, high surface roughness (integrity) of AM products remains an issue. This study aimed to apply ultrasonic nanocrystal surface modification (UNSM) technology to STS 316L prepared by AM to increase the surface hardness, to reduce the surface roughness, and to improve the friction and wear behavior to the level achieved by bulk material manufactured using traditional processes. Herein, the as-received and polished specimens were treated by UNSM technology and their resulting properties were compared and discussed. The results showed that UNSM technology increased the surface hardness and reduced the surface roughness of the as-received and polished specimens. These results can be attributed to grain size refinement and pore elimination from the surface. Moreover, the friction of the as-received and polished specimens after UNSM technology was lower compared to those of the as-received and polished specimens, but no significant differences in wear resistance were found.