• Tunnel and Underground Space
• /
• v.13 no.1
• /
• pp.64-75
• /
• 2003

This study presents a newly suggested test method of Mode II fracture toughness measurement called "Punch Through Shear Test" which was originally proposed by Backers and Stephansson in 2001. The purpose of this study is to check the validity of the suggested testing method by performing Mode II fracture toughness tests for Daejeon Granite. In addition, the optimal specimen geometry for the testing and the relation between Mode II fracture toughness and confining pressure were also investigated. Fractured surface was observed to be very smooth with lots of rock debris which came off fracture surface which obviously implies that the surface was sheared off. This confirms that Mode II fracturing actually occurred. In addition, numerical analyses including continuum analysis, particle flow code analysis and crack propagation simulations were performed. Results of these numerical analyses indicated that the cracks occurred in the specimen were predominantly in Mode II and these cracks led to failure of the test specimen. From this investigation, it can be concluded that the newly suggested "Punch Through Shear Test" method provides a reliable means of determining the Mode II fracture toughness. fracture toughness.

• Tribology and Lubricants
• /
• v.33 no.4
• /
• pp.134-140
• /
• 2017

With the increase in adoption of tilting pad journal bearings (TPJBs), various failure mechanisms related to TPJBs have been reported, of which pad wear is a frequently reported one. Pad wear causes change in geometry of the bearing, which can sometimes result in the failure of the entire system. The objective of this research is to investigate the influence of pad wear on the pad temperature, which is one of the widely used condition monitoring methods for TPJBs. For the theoretical investigation, thermohydrodynamic (THD) analysis was conducted by solving the generalized Reynolds equation and the 3D energy equation. The results of the analysis show that the temperature of the loaded pad increases while that of the unloaded pad decreases, when there is wear on the loaded pads. In addition, the minimum film thickness decreases with an increase in the wear depth. A validation test was conducted with a test rig, which mimics the axial turbine when a test rotor is supported by two TPJBs. The test bearing consists of five pads with a diameter of 60 mm, and a resistance temperature detector (RTD) is installed in the pad for temperature monitoring. The test was performed by replacing the two loaded pads with the worn pad. The test result for the TPJB with wear depth of $30{\mu}m$ show that the temperatures of the loaded pads are $8^{\circ}C$ higher and that of the unloaded pad is $2.5^{\circ}C$ lower than that of the normal TPJB. In addition, the predicted pad temperature shows good agreement with the measured pad temperatures.

• Journal of Preventive Medicine and Public Health
• /
• v.31 no.4 s.63
• /
• pp.692-707
• /
• 1998

Aim. A neurobehavioral test for workers exposed to organic solvents in the workplace can be affected by many factors : age, education, motivation, ethnicity, etc. To apply more suitable neurobehavioral test for Korean workers, we evaluated the validity of several items of computerized and traditional neurobehavioral tests. Methods. We have applied eleven tests : four items of computerized neurobehavioral test(Swedish Performance Evaluation System) including Addition, Symbol-Digit, Dig-it Span, and Finger tapping speed, and seven items of traditional neurobehavioral test consisting of Addition, Digit-Symbol, Digit Span, Benton visual retention test, Pursuit aiming, Pegboard, and Tapping. These tests were performed on 96 workers exposed to solvents, and 100 reference workers. The concurrent and construct validities were evaluated by group difference, correlation with age, educational level, hippuric acid level, neurotoxic symptom, current exposure level, multitrait-multimethod matrix, fator analysis, and discriminant analysis. Results. Statistically significant differences were observed between the workers exposed to solvents and referents in computerized Symbol-Digit, Finger tapping speed, traditional Digit-Symbol and Pegboard. The computerized Symbol-Digit, traditional Digit-Symbol, Addition, Benton visual retention test, and Pegboard were found to be related to the age. The performance of computerized Symbol-Digit, Addition, and traditional Digit-Symbol were found to be related to the educational level significantly. The computerized Symbol-Digit, Finger tapping speed, and traditional Digit-Symbol were found to be related to hippuric acid, and neurotoxic symptom. The discriminability of Finger tapping speed, and Pegboard was better than the other tests. In discriminant analysis, the model with two variables, the computerized Symbol-Digit and Pegboard, classified almost 70 percent of the workers correctly. Conclusions. These results suggest that the computerized Symbol-Digit, Finger tapping speed, and Pegboard are more satisfactory for our purpose, and the Addition, Tapping, Benton visual retention test, and Pursuit aiming are less valid than other items. These may allow the reasonable selection of core neurobehavioral tests for workers exposed to solvents in Korea.

• Culinary science and hospitality research
• /
• v.23 no.2
• /
• pp.95-103
• /
• 2017

The present study was performed to develop healthier sweeteners for brown rice Dasik with chia seed powder. The quality features and sensory evaluation were tested for brown rice Dasik with chia seed powder added with five different sweeteners and the results are as follows. The Dasik (DS) with isomalto-oligosaccharide and starch syrup received the highest scores on moisture content tests. The results from hardness tests identified the DS with agave syrup as the hardest, and the results from the adhesiveness test verified that the DS with agave syrup as well as the DS with starch syrup produce the most adhesive DS. The results of the springiness test show that the DS with starch syrup has higher springiness than other sweetners. The highest score for the chewiness and cohesiveness tests was the DS with starch syrup, while the DS with isomalto-oligosaccharide received the highest score on the gumminess test. The results of the chromaticity measurement test found that the DS with starch syrup showed the highest score of 'L' and the lowest score with fructo-oligosaccharide. In addition, the highest score of 'a' was DS with isomalto-oligosaccharide and the lowest score of 'b' was the DS with starch syrup. The results of sugar content displayed that the DS with starch syrup was the highest and the DS with fructo-oligosaccharide was the lowest score. The results of sensory evaluation verified that color did not influence evaluators' preference investigation. The results of sweet flavor test found that the DS with honey and the DS with agave syrup had the most preferred by participants, but there was no statistically significant difference among all five different sweeteners from the sweet taste test. Furthermore, the DS with agave syrup received the highest score while the DS with agave syrup scored the lowest from the hardness preference test. General preference evaluation identified the highest score with the addition of fructo-oligosaccharide and the lowest score with the addition of isomalto-oligosaccharide. Thus, the findings of the present study provide the meaningful results to demonstrate the DS with fructo-oligosaccharide is the most suitable sweetener to manufacture brown rice DS added by chia seed powder, and this result will help marketers with creating meaningful strategies and with developing similar products using chia seed powder.

• Journal of Korean Neurosurgical Society
• /
• v.66 no.5
• /
• pp.511-524
• /
• 2023

Objective : This animal model aimed to compare the rat group that received brain irradiation and did not receive additional treatment (only saline) and the rat group that underwent brain irradiation and received Granulocyte colony stimulating factor (G-CSF) treatment. In addition, the effects of G-CSF on brain functions were examined by magnetic resonance (MR) imaging and histopathologically. Methods : This study used 24 female Wistar albino rats. Drug administration (saline or G-CSF) was started at the beginning of the study and continued for 15 days after whole-brain radiotherapy (WBRT). WBRT was given on day 7 of the start of the study. At the end of 15 days, the behavioral tests, including the three-chamber sociability test, open field test, and passive avoidance learning test, were done. After the behavioral test, the animals performed the MR spectroscopy procedure. At the end of the study, cervical dislocation was applied to all animals. Results : G-CSF treatment positively affected the results of the three-chamber sociability test, open-space test and passive avoidance learning test, cornu Ammonis (CA) 1, CA3, and Purkinje neuron counts, and the brain levels of brain-derived neurotrophic factor and postsynaptic density protein-95. However, G-CSF treatment reduced the glial fibrillary acidic protein immunostaining index and brain levels of malondialdehyde, tumor necrosis factor-alpha, nuclear factor kappa-B, and lactate. In addition, on MR spectroscopy, G-CSF had a reversible effect on brain lactate levels. Conclusion : In this first designed brain irradiation animal model, which evaluated G-CSF effects, we observed that G-CSF had reparative, neuroprotective and anti-neurodegenerative effects and had increased neurotrophic factor expression, neuronal counts, and morphology changes. In addition, G-CSF had a proven lactate-lowering effect in MR spectroscopy and brain materials.

• Journal of KIISE:Software and Applications
• /
• v.36 no.5
• /
• pp.361-375
• /
• 2009

The major concern of component users who develop applications using the existing components is to confirm whether a component is collaborating with the different components in accordance with the requirements. Therefore, interoperability testing whose role is to check whether components collaborate with each other within the new operating environment not within the component development content of each component is considered as an importance research topic. In this paper, we propose a test case generation technique for interoperability test of component based software. The proposed technique defines a test model for generating test cases. The proposed technique generates test models from the use case specification and thereafter from these models, test cases for Interoperability testing are derived. In addition, we describe a tool which Implements the procedures for generating test sequences from test models.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.3
• /
• pp.302-308
• /
• 2021

Developers generally use test standards suggested by military standards such as MIL-STD-810G when performing vibration tests in the materiel development. However, according to MIL-STD-810G, it is recommended to test by tailoring the test standard suitable for the developed materiel, and it is specified to apply the suggested test standard only when there is difficulty in tailoring. In addition, the test standards presented by MIL-STD-810G are standards created under operating conditions different from the actual operating environment of each developed materiel, so the test according to this standard may be excessive or understated. Therefore, the developer must create an appropriate vibration test standard for the developed materiel as similar to the operating conditions as possible. In this paper, the procedure for creating the functional test standard and durability test standard suitable for the operating environment of the equipment to be mounted on the propeller aircraft under development is described, and the created standard is introduced.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.6
• /
• pp.596-605
• /
• 2022

In this study, analysis of dynamic characteristics and flight vibration was performed to unmanned aerial vehicles. The analysis model was supplemented by performing a dynamic characteristic test and a random vibration test using manufactured dummy aerial vehicle. For the dynamic characteristic test, a bungee cable was used to implement the free end boundary condition. Prior to the flight vibration test using a multiple electric shaker, a random vibration test was performed to predict the excitation force during the actual flight vibration test. It was judged that the actual test could be predicted more accurately by supplementing the analysis model from the test results. In addition, it was possible to determine the feasibility of the test by predicting the excitation force of the flight vibration test.

• Journal of Aerospace System Engineering
• /
• v.17 no.1
• /
• pp.97-105
• /
• 2023

For aviation sensor pod, structural integrity should be verified through static structural tests for flight loads induced in various maneuvering conditions of the aircraft. For this, it is necessary to develop a test system for full-scale static load test of sensor pod. Based on test requirements, this paper introduced a test system configuration of the static test and the development of test structure frame, restraints equipment, loading equipment, control, and measurement equipment. In addition, methods and procedures for verifying the developed test system were explained. In conclusion, the static load test and data acquisition were successfully performed. Reliability of the test equipment was also verified in the process.

• Elastomers and Composites
• /
• v.52 no.3
• /
• pp.187-193
• /
• 2017

In this study, the effect of the cure, mechanical properties, and oil resistance of NBR (acrylonitrile-butadiene rubber)/peroxide compounds were investigated for various co-agents. NBR compounds were characterized using a swelling test, a rheometer (MDR), and a compression set test. Mechanical properties were tested with original compounds, heated in air and exposed to the ASTM No.1, IRM 903 oil. NBR compounds were prepared using peroxide as the crosslinking agent. Trimethylolpropane trimethacrylate (TMPTMA), triallyl isocyanurate (TAIC), and 1,2-polybutadiene (HVPBD) were used as co-agents. The NBR compounds containing TMPTMA and HVPBD lowered the scorch time, while the addition of TAIC did not significantly change the scorch time. NBR compounds containing TMPTMA increased the crosslinking density, while the addition of TAIC and HVPBD lowered the crosslinking density. Moreover, the addition of TMPTMA improved the oil resistance of the NBR compound.