• 전기학회논문지
• /
• 제61권8호
• /
• pp.1123-1129
• /
• 2012

This paper presents the fast steady state analysis using time-stepping finite element method for a high power three-phase transformer. The high power transformer spends huge computational cost of the time-stepping finite element method. It is because that the high power transformer requires a lot of time to reach steady state by its large inductance component. In order to reduce computational cost, in this paper, the adaptive time-step control algorithm combined with the embedded 2nd 4th singly diagonally implicit Runge-Kutta method and the analysis strategy using variation of the winding resistance are studied, and their numerical results are compared with those from the typical time-stepping finite element method.

• 전력전자학회논문지
• /
• 제18권1호
• /
• pp.18-25
• /
• 2013

In this paper, a nonlinear controller based on adaptive back-stepping method is proposed for high performance operation of Interior Permanent Magnet Synchronous Motor (IPMSM). First, in order to improve the performance of speed tracking, a nonlinear back-stepping controller is designed. In addition, since it is difficult to achieve the high quality control performance without considering parameter variation, a parameter estimator is included to adapt to the variation of load torque in real time. Finally, for the efficiency of power consumption of the motor, controller is designed to operate motor with the minimum current for the required maximum torque. The proposed controller is tested through experiment with a 1-hp Interior Permanent Magnet Synchronous Motor (IPMSM) for the angular velocity reference tracking performance and load torque volatility estimation, and to test the Maximum Torque per Ampere (MTPA) operation. The result verifies the efficacy of the proposed controller.

• 한국전자통신학회논문지
• /
• 제6권6호
• /
• pp.855-864
• /
• 2011

본 논문은 IPMSM(Interior Permanent Magnet Synchronous Motor)의 고성능 운전을 위해 비선형 제어를 기반으로 하는 적응 백스텝핑 제어기를 제안한다. 먼저 각속도의 추종성능을 향상시키기 위해서 비선형 백스텝핑 제어기를 설계한다. 파라메타 변동의 영향을 고려하지 않고 설계된 제어기는 고성능 운전이 어렵다. 부하토크의 변동에 대해 실시간 적응할 수 있는 파라메타 추정기를 설계에 포함하여 고성능 운전이 가능하게 한다. 또한 전동기의 효율적인 전력소비를 위하여 최대토크를 얻기 위한 최소전류의 운전을 할 수 있도록 제어기를 설계하였다. 제안된 제어기로 2마력급의 IPMSM에 적용하여 각속도 레퍼런스에 대한 추종성능과 부하토크 변동에 대한 추정, 그리고 MTPA(Maximum Torque per Ampere) 운전을 시험하여 일정토크 운전영역에서 안정화된 강건한 제어기임을 시뮬레이션을 통해 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제3권4호
• /
• pp.391-410
• /
• 1995

The application of adaptive finite element method to dynamic problems is investigated. Both the kinetic and strain energy errors induced by space and time discretization were estimated in a consistent manner and controlled by the simultaneous use of the adaptive mesh generation and the automatic time stepping. Also an optimal ratio of spatial discretization error to temporal discretization error was discussed. In this study it was found that the best performance can be obtained when the specified spatial and temporal discretization errors have the same value. Numerical examples are carried out to verify the performance of the procedure.

• 대기
• /
• 제33권4호
• /
• pp.331-341
• /
• 2023

A numerical forecasting models usually predict future states by performing time integration considering fixed static time-steps. A time-step that is too long can cause model instability and failure of forecast simulation, and a time-step that is too short can cause unnecessary time integration calculations. Thus, in numerical models, the time-step size can be determined by the CFL (Courant-Friedrichs-Lewy)-condition, and this condition acts as a necessary condition for finding a numerical solution. A static time-step is defined as using the same fixed time-step for time integration. On the other hand, applying a different time-step for each integration while guaranteeing the stability of the solution in time advancement is called an adaptive time-step. The adaptive time-step algorithm is a method of presenting the maximum usable time-step suitable for each integration based on the CFL-condition for the adaptive time-step. In this paper, the adaptive time-step algorithm is applied for the Korean Integrated Model (KIM) to determine suitable parameters used for the adaptive time-step algorithm through the monthly verifications of 10-day simulations (during January and July 2017) at about 12 km resolution. By comparing the numerical results obtained by applying the 25 second static time-step to KIM in Supercomputer 5 (Nurion), it shows similar results in terms of forecast quality, presents the maximum available time-step for each integration, and improves the calculation efficiency by reducing the number of total time integrations by 19%.

• 한국전자통신학회논문지
• /
• 제9권8호
• /
• pp.899-905
• /
• 2014

본 논문은 BLDC 전동기의 속도제어를 위해 백스텝핑 설계기법을 이용한 제어기 설계방법을 제안한다. 먼저 백스텝핑 설계기법으로 제어기를 기반으로 부하토크의 추정기를 설계한다. 부하토크의 추정기는 부하토크 변동에 대해 실시간 추정할 수 있도록 구성되어졌다. 제안된 제어기를 120W급의 BLDC 전동기에 적용하여 부하토크를 실시간 적응하면서 속도 레퍼런스를 추종하는 능력을 시험하였다. 그 결과 설계된 제어기와 추정기의 성능이 유용함을 보일 수 있었다.

• 대한토목학회논문집
• /
• 제26권4D호
• /
• pp.671-678
• /
• 2006

본 연구에서는 2개의 질량을 갖는 1/4 차량모델을 이용하여 차량-궤도-교량간의 동적상호작용 현상을 표현하기 위해 비선형 헤르츠 접촉스프링(Nonlinear Hertzian Contact Spring)과 비선형 접촉감쇠장치(Nonlinear Contact Damper)를 도입하였다. 또한, 차량에 작용하는 하중은 차량의 중량외에 임의시간단계의 차륜재하위치인 레일답면(즉, 주행로상의 접촉면)에서의 변위가 제한조건식(Constraint Equation)으로 가해졌다. 이 변위제한조건식은 Penalty방법(Penalty Method)에 의해 구현되었으며, 해의 안정화(Stabilization)를 위한 기법과 제한조건오차보정반력(Reaction from Constraint Violation)을 도입하였다. 또한, 차량의 피칭운동을 표현하고, 다양한 차량/열차를 모형화하기 위해서 1/4 차량모델의 차체 및 대차프레임 간을 강체연결 및 핀이 있는 강체연결조건으로 모형화하였다. 시간적분방법으로는 Newmark계열의 시간적분법이 사용되었으며, 해의 정확성 확보를 위해 국지적 오차평가에 근거한 적응적시간간격기법(Adaptive Time-Stepping Scheme)을 도입하였다. 이러한 적응적시간간격기법을 도입하여 동적해석에서 시간간격의 크기를 자동적으로 결정함으로써 동적해석에서의 해의 정확성을 확보하고 시간적분에 소요되는 계산비용을 감소시킬 수 있을 것으로 기대된다.

• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.190-200
• /
• 1996

Step-by-step time integration methods are widely used for solving structural dynamics problem. One difficult yet critical choice an analyst must make is to decide an appropriate time step size. The choice of time step size has a significant effect on solution accuracy and computational expense. The objective of this research is to derive error estimate for newly developed time integration method and develop automatic time step size control algorithm for structural dynamics. A formula for computing error tolerance is derived based on desired period resolution. An automatic time step size control strategy is proposed based on a normalized local error estimate for the generalized-α method. Numerical examples demonstrate the developed strategy satisfies general design criteria for time step size control algorithm for dynamic problem.

• Journal of Mechanical Science and Technology
• /
• 제16권12호
• /
• pp.1613-1626
• /
• 2002

This paper presents hybrid control of an active suspension system with a full-car model by using H$\sub$$\infty$/ and nonlinear adaptive control methods. The full-car model has seven degrees of freedom including heaving, pitching and rolling motions. In the active suspension system, the controller shows good performance: small gains from the road disturbances to the heaving, pitching and rolling accelerations of the car body. Also the controlled system must be robust to system parameter variations. As the control method, H$\sub$$\infty$/ controller is designed so as to guarantee the robustness of a closed-loop system in the presence of uncertainties and disturbances. The system parameter variations are taken into account by multiplicative uncertainty model and the system robustness is guaranteed by small gain theorem. The active system with H$\sub$$\infty$/ controller can reduce the accelerations of the car body in the heaving, pitching and rolling directions. The nonlinearity of a hydraulic actuator is handled by nonlinear adaptive control based on the back-stepping method. The effectiveness of the controllers is verified through simulation results in both frequency and time domains.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 봄 학술발표회 논문집
• /
• pp.1-8
• /
• 1994

An automated procedure which allows adaptation of spatial and time discretization simultaneously in finite element analysis of linear elastodynamic problems is presented. For dynamic problems having responses dominated by high frequency modes, such as those with impact, explosive, traveling and earthquake loads high gradient stress regions change their locations from time to time. And the time step size may need to vary in order to deal with whole process ranging from transient phase to steady state phase. As the sizes of elements in space vary in different regions, the procedure also permits different time stepping. In such a way, the best performance attainable by the finite element method can be achieved. In this study, we estimate both of the kinetic energy error and stran energy error induced by spatial and time discretization in a consistent manner. Numerical examples are used to demonstrate the performance of the procedure.