• Communications for Statistical Applications and Methods
• /
• v.28 no.5
• /
• pp.411-424
• /
• 2021

Inference following two-stage adaptive designs (also known as two-stage randomization designs) with survival endpoints usually focuses on estimating and comparing survival distributions for the different treatment strategies. The aim is to identify the treatment strategy(ies) that leads to better survival of the patients. The objectives of this study were to assess the performance three commonly cited methods for estimating survival distributions in two-stage randomization designs. We review three non-parametric methods for estimating survival distributions in two-stage adaptive designs and compare their performance using simulation studies. The simulation studies show that the method based on the marginal mean model is badly affected by high censoring rates and response rate. The other two methods which are natural extensions of the Nelson-Aalen estimator and the Kaplan-Meier estimator have similar performance. These two methods yield survival estimates which have less bias and more precise than the marginal mean model even in cases of small sample sizes. The weighted versions of the Nelson-Aalen and the Kaplan-Meier estimators are less affected by high censoring rates and low response rates. The bias of the method based on the marginal mean model increases rapidly with increase in censoring rate compared to the other two methods. We apply the three methods to a leukemia clinical trial dataset and also compare the results.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.3
• /
• pp.326-333
• /
• 2015

This paper reports an adaptive positive feedback bias control technique for operational transconductance amplifiers to adjust the bias current based on the output current monitored by a current replica circuit. This technique enables operational transconductance amplifiers to quickly adapt their power consumption to various analog workloads when they are configured with negative feedback. To prove the concept, a test voltage follower is fabricated in $0.5-{\mu}m$ CMOS technology. Measurement result shows that the power consumption of the test voltage follower is approximately linearly proportional to the load capacitance, the signal frequency, and the signal amplitude for sinusoidal inputs as well as square pulses.

• The Journal of Natural Sciences
• /
• v.8 no.1
• /
• pp.5-15
• /
• 1995

The equation error formulation in the adaptive IIR filtering provides convergence to a global minimum regardless a local minimum with a large stability margin. However, the equation error formulation suffers from the bias in the coefficient estimates. In this paper, a new algorithm, which does not require a prespecification of the noise variance, is proposed for the equation error formulation. This algorithm is based on the equation error smoothing and provides an unbiased parameter estimate in the presence of white noise. Through simulations, it is demonstrated that the algorithm eliminates the bias in the parameter estimate while retaining good properties of the equation error formulation such as fast convergence speed and the large stability margin.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.159-162
• /
• 2005

Random Early Detection (RED), one of the most well-known Active Queue Management (AQM), has been designed to substitute Tail Drop and is nowadays widely implemented in commercially available routers. RED algorithm provides high throughput and low delay as well as a solution of global synchronization. However RED is sensitive to parameters setting, so the performance of RED, significantly depends on the fixed parameters. To solve this problem, the Adaptive RED (ARED) algorithm is suggested by S. Floyd. But, ARED also uses fixed parameters like target-queue length; it is hard to respond to bursty traffic actively. In this paper, we proposed AQM algorithm based on the variation of current queue length in order to improve adaptability about burst traffic. We measured performance of proposed algorithm through a throughput, marking-drop rate and bias phenomenon. In experimentation, we raised a packet throughput as reduced packet drop rate, and we confirmed to reduce a bias phenomenon about bursty traffic.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.3
• /
• pp.283-289
• /
• 2015

In this paper, a GNSS interference detection algorithm based on an adaptive fading Kalman filter is proposed to detect a spoofing signal which is one of the threatening GNSS intentional interferences. To detect and mitigate the spoofing signal, the fading factor of the filter is used as a detection parameter. For simulation, the effect of the spoofing signal is modeled by the ramp type bias error of the pseudorange to emulate a smart spoofer and the change of the fading factor value according to ramp type bias error is quantitatively analyzed. In addition, the detection threshold is established to detect the spoofing signal by analyzing the change of the error covariance and the effect of spoofing is mitigated by controlling the Kalman gain of the filter. To verify the performance analysis of the proposed algorithm, various simulations are implemented. Through the results of simulations, we confirmed that the proposed algorithm works well.

• Communications for Statistical Applications and Methods
• /
• v.14 no.2
• /
• pp.345-353
• /
• 2007

A Bayesian estimation of the Nakagami-m fading parameter is developed. Bayesian estimation is performed by Gibbs sampling, including adaptive rejection sampling. A Monte Carlo study shows that the Bayesian estimators proposed outperform any other estimators reported elsewhere in the sense of bias, variance, and root mean squared error.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.109.5-109
• /
• 2001

The separation of scintillation phenomena concurrent with rain attenuation phenomena can be accomplished by filtering. Based on the analysis of satellite signal fading during rain, scintillation and rain attenuation phenomena are examined and extracting from raw data by using adaptive IIR high-pass filter and adaptive IIR low-pass filter. Adaptive IIR filter are designed by using the algorithm of Least Mean p-Power (LMP) Error Criterion which have been modified by Quantizing Gradient technique. This algorithm reduces amount of multiplication computational equal to the length of input data. It is prove here that the convergence speed, variance, bias independence on p values. For this application, p=1 is chosen. The procedure of application ...

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1177-1184
• /
• 2008

Non-line-of-sight (NLOS) propagation can severely weaken the accuracy of ranging and localization in wireless location systems. NLOS bias mitigation techniques have recently been proposed to relieve the NLOS effects, but positively rely on the capability to accurately distinguish between LOS and NLOS propagation scenarios. This paper proposes an energy-capture-based NLOS identification method for LDR-UWB systems, based on the analysis of the characteristics of the channel impulse response (CIR). With this proposed energy capture method, the probability of successfully identifying NLOS is much improved than the existing methods, such as the kurtosis method, the strongest path compare method, etc. This NLOS identification method can be employed in adaptive modulation scheme to decrease bit error ratio (BER) level for certain signal-to-noise ratio (SNR). The BER performance with the adaptive modulation can be significantly enhanced by selecting proper modulation method with the knowledge of channel information from the proposed NLOS identification method.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.94-100
• /
• 2001

When using a sample covariance matrix data in paucity of snapshots, adaptive matched field processing will have problem in inverting covariance matrix due to the rank deficiency. The general solutions are diagonal loading and eigenanalysis methods, but there is a significant bias in the power output. This paper presents a quantitative study of bias of power output and the performance of source localization through the simulation and the measured data analysis in fixed source case using the diagonal loading method for the minimum variance processor. Results show that the bias in power output is reduced and the performance of source localization is improved when the number of snapshots is greater than the number of array sensors.

• Journal of the Korea Society for Simulation
• /
• v.23 no.4
• /
• pp.111-119
• /
• 2014

The cloud environment need resource management method that to enable the big data issue and data analysis technology. Existing resource management uses the limited calculation method, therefore concentrated the resource bias problem. To solve this problem, the resource management requires the learning-based scheduling using resource history information. In this paper, we proposes the ART (Adaptive Resonance Theory)-based adaptive resource management. Our proposed method assigns the job to the suitable method with the resource monitoring and history management in cloud computing environment. The proposed method utilizes the unsupervised learning method. Our goal is to improve the data processing and service stability with the adaptive resource management. The propose method allow the systematic management, and utilize the available resource efficiently.