• Journal of Korean Society on Water Environment
• /
• v.20 no.6
• /
• pp.583-588
• /
• 2004

This research examined the treatment efficiency and methane production rate in treating slurry-type swine waste using UASB (upflow anaerobic sludge blanket) reactor. The UASB reactor was operated at an organics volumetric loading rate (VLR) of $2.6-15.7kgCOD/m^3/day$. A stepwise increase of the VLR resulted in a temporary deterioration in the COD removal rate in UASB reactor but recovered quickly. The COD removal rate were 65-70% for VLR up to $5 kgCOD/m^3/day$. When organics VLR was $10kgCOD/m^3/day$, the COD removal rate decreased sharply and there was loss of 17.537g of the seeding biomass due to sludge washout. This result indicated that the UASB system cannot be adapted to more than $10kgCOD/m^3/day$ of VLR. As the organic load increased from 2.6 to $15.7kgCOD/m^3/d$, the biogas production rate varied from 3.2 to 10.8 L/d and the methane conversion rate of the organic matter varied from 0.30 to $0.23m^3CH_4/kg\;COD_{removed}$. The methane content showed the range of 70.1-81.5% during the experimental period. The volatile solids (VS) removal efficiency was similar at the low VLR (< $5 kgCOD/m^3/day$), but it decreased sharply at the high VLR (> $5 kgCOD/m^3/day$). The VS reduction rate was, moreover, large those of COD. The result shows that hydraulic retention time above 2 days is essential in case of treating wastewater containing 1% of solids.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.203-208
• /
• 2005

Electronic components for space launch vehicles are exposed to a severe vibrational environment at launch and flight. The structural reliability of each component can be verified using mathematical approaches. In order to verify the structural reliability, an important parameter is the natural frequency of PCB(Printed Circuit Board) assembly mounted electronic components on and housing mounted PCB assembly in. In this paper, in order to find natural frequencies of PCB assemblies and the housing of hydrazine TCU(Thruster Control Unit), FEM(Finite Element Method) is adapted. The analytical result of FEM is verified by experimental method.

• Korean Institute of Interior Design Journal
• /
• v.23 no.6
• /
• pp.204-211
• /
• 2014

This study aims to investigate the child patients' space use and behavior with its focus on the rest and play activities. The structural observation method followed by literature review adapted to find out the commonality and difference of play activities among the age groups. Children's development and types of play activities and participation in activities were reviewed through the related studies. Preliminary research on spatial composition and facilities and the observation of child patients' play behavior and space use was carried out as a main research. A total of 148 cases were studied and PASW 18, a statistics analysis program, was used for data analysis. The results are as follows; (1) The Lobby was important space as a play and rest area. (2) The subjects mainly played physical play and social-cognitive play. The result of this study provides fundamental data for designing children's hospitals that can contribute to the treatment and health improvement of child patients.

• ETRI Journal
• /
• v.29 no.3
• /
• pp.281-291
• /
• 2007

Wearable computers consisting of various small devices such as smart phones, digital cameras, MP3 players and specialized I/O devices in personal area networks will play an important role in future ubiquitous computing. In this environment, accessing user data is quite complex due to the dynamic and heterogeneous characteristics of the underlying networks. Moreover, since the amount of user data increases rapidly, automatic data backup management is also critical. To overcome these challenges, several studies have been conducted including our previously proposed file service system, PosCFS, which could be adapted to the requirements with a virtualization technique allowing per-user global namespace for managing and accessing data stored on physical storage spaces detected in PAN. In this paper, we present a smart file service framework, PosCFS+ which is an improved and extended version of our previous work. Performance improvement is made possible by redesigning the metadata management scheme based on database and keywords rather than ontology. In addition, the automatic data replication management is newly designed based on the OSD protocol.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.167-170
• /
• 2005

We performed field test and analyzed results of field test in variable HFC(Hybrid Fiber Coaxial) network environments. And we investigated whether the test results is satisfied in DOCSIS(Data-over-Cable Service Interface Specification) 2.0 and OpenCable standard. Also, we propose HFC improvement problem for HFC Network quality as BcN(Broadband convergence Network) access network. We tested three sample areas. The sample areas represent various type of SO(System Operator) in korea. The field test was to measure signal level about digital channels. In results of multiple digital channels, in case of "Equalizer ON", we could be obtained very good test results. The results of field test were shown in satisfying recommended values in DOCSIS 2.0 and OpenCable. So, we could have confidence through field test that BcN will be possible to be adapted to environment of korea HFC network.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.811-814
• /
• 2006

There are Monsters for game player in computer game. The Monsters generated by steady methods and data. And There are few methods that can be adapted to environment or player. This paper introduces a reformed Genetic Algorithm for Monster generation. This algorithm is applied to Homologous Chromosomes(HC). In existing GAs, An Individual have only one genome. But, In proposed algorithm, each Individual has a pair of allele genes on each locus. To compare proposed algorithm with Simple Genetic algorithm, I simulated the solution of a simple Binary problem. After experiments, I conclude that the suggested Algorithm reduced the number of generations more than SGA.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.1
• /
• pp.1-9
• /
• 2004

This study is focused on finding out the character of urban recreation forest and investigating facilities regulations of forest resources around urban areas to meet future recreation needs. The method of this study is to compare urban recreation forests with similar facilities like urban parks and natural recreation forests. By this way, this study not only identifies the characteristics of urban recreation forest as emerging recreational facility, but also outputs regulations that can be adapted to real environment. Urban recreation forest is defined as follows: It has forest with good natural landscape and easy access. It makes emotion rich and its function is focused on outdoor recreation nature education, and experiences for family group mainly within a day or on weekends. This study suggests that the minimal area of urban recreation forest should be over 100,000$m^2$, with a facility ratio less than 20%. Building coverage should be less than 7% when the urban recreation forest is under 300,000$m^2$, less than 5％ when 300,000∼500,000$m^2$, and less than 3％ when over 500,000$m^2$ The limits of building height is 3 stories, or under 12m. This study finds out the character, the needs of urban recreation and the criterion for project feasibility. significance of the result is supplying theoretical basement on related regulation. Based on the results, further study will establish landscape management method and legislation & application in a detailed examination.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.9-19
• /
• 2010

Every car manufacturer desires to reduce the new car development time spent in improving the safety, NVH, lightweight, reliability and environment friendly features of the car. Other considerations such as planning, exterior and interior styling, packaging, color, and material selection increase the complexity of the car design process. This paper proposes a personal DDP (Digital Design Process) to utilize the engineering analysis and design/styling software for car design. DDP can be efficiently used by a team of car research center or a studio with small number of engineers, helping ordinary engineers becoming ambidextrous in design as well as engineering applications. The concept model starts from idea sketch, rendering, and 3D surface model with CAS (Computer Aided Styling) to the final safety estimation by using proposed DDP based on engineering technology (CAD, CAE). The concept model proposed a hydrogen fuel cell sports coupe which could be available within next 10 years. The proposed DDP can not only reduce the new car development time but also be adapted into designing of varied products such as aircraft, yacht, electrical equipment and sports gear.

• The Journal of the Korea Contents Association
• /
• v.9 no.1
• /
• pp.115-122
• /
• 2009

In this paper, we proposed scheme that we use a difference of timestamp in time in Ubiquitous environments as we use the Diffie-Hellman method that OTP was applied to when it deliver a key between nodes, and can detect a malicious node at these papers. Existing methods attempted the malicious node detection in the ways that used correct synchronization or directed antenna in time. We propose an intermediate malicious node detection way at these papers without an directed antenna addition or the Trusted Third Party (TTP) as we apply the OTP which used timestamp to a Diffie-Hellman method, and we verify safety regarding this. A way to propose at these papers is easily the way how application is possible in Ubiquitous environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2713-2717
• /
• 2011

To transmit data from straggling sensors in water-processing basic industries etc., used Binary-CDMA system has safety voluntarily. But Binary-CDMA is necessity that react very sensitively in environment change as defense about hacking and cracking of various way that change suddenly. Therefore, this paper is that see added cryptographic algorithm for safety and easy update on correlator that a bottle-neck phenomenon is happened in Binary-CDMA to solve problem that is such. Added cryptographic algorithm does to communicate safe information in channel that is not safe as that achieve 1:1 confrontation for sensors by symmetric cryptographic algorithm.