• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.643-645
• /
• 2008

To obtain weight reduction and high performance, level set based topology optimization in magnetic fields is promising for the design of magnetic devices where the precise boundary shape and topological chanages are required. Level set function is introduced to represent ferromagnetic material boundaries and material properties of the magnetic reluctivity are determined. The optimization problem is formulated for maximizing the actuating force in a prescribed direction under limited usage of ferromagnetic material.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.175-178
• /
• 1997

This study was carried out to obtain an analytical expression for the specifications of the Stewart Platform that minimize the maximum force acting on the hydraulic cylinder. The position and orientation of the platform were calculated by means of the inverse kinematic analysis. The maximum force to be exerted on a cylinder was calculated using the Newton's second law for the case when the platform is moved along a horizontal axis with 0.6 g, the maximum translational acceleration possible. This paper suggests a mathematical model to minimize the maximum actuating force using radius and angle ratios as design variables. Finally, a fuzzy set for the minimum actuating force is proposed for this dynamic optimal design problem.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1470-1478
• /
• 2000

Analysis of actuating forces and joint reaction forces are essential to determine the capacity of actuators, to control the system and to design the components. This paper presents an algorithm tha t calculates actuating forces(or torques) depending on the various driving types to produce a given system motion. The joint reaction forces(or torques) of multibody systems with closed-loops are analyzed in the Cartesian coordinate space using the inverse velocity transformation technique. Two numerical examples were carried out to verify the algorithm proposed.

• 드라이브 ㆍ 컨트롤
• /
• 제9권3호
• /
• pp.29-36
• /
• 2012

The hydraulic cylinder is used for actuating the roller-link type rotating floodgate which controls the volume of water in the reservoir. The locating points of hydraulic cylinder are restricted to the limited space and determined to minimize the cylinder force necessary for actuating the floodgate. Generally, the head end point of cylinder is fixed at underground and the rod end point of cylinder is connected to the support link. Therefore there exist three design variables to be determined to minimize the cylinder force within the rotating range of floodgate. First, the mathematical model of the roller-link type rotating floodgate is derived to find the cylinder force corresponding to the floodgate angle. Then, the optimal locating point of hydraulic cylinder is searched using the complex method that is one kind of constrained direct search method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.986-990
• /
• 2004

In this paper, we propose a method to estimate the actuating voltage of the nanotweezer made by manual assembly using carbon nanotube. The nanotweezer is composed of two CNT arms that are made by the multiwalled carbon nanotube and tungsten tip. Since the each CNT arm has the macro actuator, the nanotweezer can manipulate a large particle and it is possible to close and open the CNT arm repeatedly. The closing voltage, i.e., actuating voltage is calculated using the capacitance between the carbon nanotubes in CNT arm. We demonstrate the actuation of the nanotweezer using the voltage calculated with the electrostatic force.

• 한국전기전자재료학회논문지
• /
• 제17권4호
• /
• pp.448-452
• /
• 2004

The micromachined variable optical attenuator(VOA) was presented in the paper. The VOA has two single mode fiber(SMF) aligned with free space and symmetric parallel plate actuator with microshutter, which can control a amount of light by driving the actuator. In the paper, analysis on driving performances of the VOA was performed and can be reduced threshold voltage through the decreasing displacement actuating range. This paper presents a VOA that is fabricated using bosch deep silicon etching process with silicon on insulator(SOD wafer. The VOA consists of driving electrode, ground electrode, actuating microshutter, and mechanical stopper. In this VOA, actuating shutter is driven by electrostatic force and the threshold voltage is close to 28V, 46V come along with the spring width of 5${\mu}{\textrm}{m}$, 7${\mu}{\textrm}{m}$ respectively. Attenuation range is measured from 2.4㏈ to 16.7㏈.

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.170-176
• /
• 2005

The hydraulic cylinder is used for actuating the sluice gate which controls the volume of water in the reservoir. The locating points of hydraulic cylinder are restricted to limited space and determined to minimize the cylinder force necessary for actuating the sluice gate. Generally, the head end point of cylinder is fixed at underground and the rod end point of cylinder is connected to the gate plate when it is fully opened. Therefore there exist three parameters to be determined to minimize the cylinder force in the operation range of sluice gate. The optimal locating points of hydraulic cylinder are obtained using the complex method that is one kind of constrained direct search m method.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.194-199
• /
• 2001

In this paper, we propose a new locomotive mechanism using impulsive force for microcapsule-type endoscope. It has the compact size for movement in the colon and actuating mechanisms for hi-directional movement. The actuating mechanism resembles a pneumatic cylinder and consists of body, inertia mass(piston). spring. pneumatic source and calve. When valve is ON, the pneumatic impulsive force between piston and body drives them in two opposite direction. As the air in the body is passed away, the contrary movements are occurred by spring reaction. Therefore, the direction of body's motion is determined by the relative magnitude of two opposite impulsive forces, i.e., pneumatic and spring force. The effect of two impulsive forces can simply be controlled by On-Off time of solenoid valve.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.775-779
• /
• 2001

In optical disk drive (ODD), disk rotation speed has been increasing rapidly to achieve high data transfer rate. High servo bandwidths for focusing and tracking actuator are required to follow dynamic disturbance by high rotation speed in ODD. However, the servo bandwidth is significantly limited by some vibration modes which are induced by the flexibility of moving part. In this work, the vibration modes affecting bandwidth of actuators are suppressed by modifying actuating force by VCM. For this, the relation between the horizontal component of the actuating force and vibration mode is analyzed and force characteristic affecting to vibration mode is obtained through electromagnetic and structural analysis using simulation program.

• 한국항공우주학회지
• /
• 제49권8호
• /
• pp.649-660
• /
• 2021

S -76 모델을 기준으로 해석을 통해 개별 블레이드에 대한 고조화 가진에 따른 로터 허브 진동 수준을 분석하였다. 개별 블레이드에 대한 고조화 가진 방법은 회전부에 있는 피치링크 자체에서 추가적인 가진력을 발생하는 방법(Actuating by Individual Pitch-link)과 블레이드 능동 뒷전 플랩조절을 통해 가진력을 발생하는 방법(Active Trailing Edge Flap)으로 구분하였다. 100kts의 전진비행 조건에서 개별 블레이드에 대한 2P/3P/4P/5P 조화 가진을 15도의 위상각을 변경시켜가며 허브 하중 해석을 수행하였다. 그 결과를 통해 가진 조건에 따른 로터 시스템의 민감도를 확인하였으며 이 정보를 기반으로 로터 시스템의 특성을 나타내는 전달 행렬(T-matrix)을 구성하였다. 그리고 전달 행렬을 통해 비행조건에 대해 허브 진동 수준을 최소화하는 최적의 고조화 가진 조건을 도출하였다. 그리고 최소 허브 진동 조건에서 로터 시스템의 성능 및 피치링크 하중에 대한 영향성과 더불어 소음해석을 통한 소음 영향성도 확인하였다.