• 한국의학물리학회지:의학물리
• /
• 제25권2호
• /
• pp.79-88
• /
• 2014

내부표적체적을 기반으로 계획된 간암 환자의 세기조절방사선치료에서 호흡에 의한 장기의 움직임 영향을 적용하여 체내 실제 종양 부피와 중요 장기 부피에서의 선량분포를 재계산하고, 호흡동조 방식의 세기조절방사선치료 계획 결과와 비교를 통한 선량적 특성을 분석하였다. 내부표적체적은 MIM 프로그램을 사용하여 형성하였고, 호흡에 의한 장기 움직임을 모사할 수 있는 구동 팬텀을 사용하였다. 체내 선량분포는 세기조절방사선치료의 품질보증 과정에서 2차원 다이오드 검출기 배열 장치인 MapCHECK2로 측정한 조사면 별 측정 결과를 기반으로 3DVH 프로그램으로 재계산 하였다. 내부표적체적 기반의 세기조절방사선치료 수행 시 계획표적체적에 충분히 처방선량이 조사되었지만, 선량의 균일도는 호흡동조 방식의 세기조절방사선치료와 비교 시 열등한 결과를 보였다. 상대적으로 더 큰 조사면을 사용하는 내부표적체적 기반의 세기조절방사선치료에서 손상위험장기체적에 더 높은 선량이 조사됨을 확인할 수 있었지만, 척수에 증가된 선량은 부작용 발생확률에 큰 영향을 주지 않는 적은 양이었고, 정상 간이나 신장 부위의 증가된 선량도 최적화 과정에서 좀 더 선량감소 조건을 강화한다면 큰 영향이 없을 것으로 평가되었다. 호흡동조 방식의 세기조절방사선치료가 치료계획에서는 더 좋은 선량분포를 보이고 있으나, 실제 구현 과정에서 다엽콜리메이터의 움직임 오류로 인한 선량의 오차와 치료시간의 증가 측면의 단점이 있으므로, 환자 호흡 상태 및 손상위험장기의 선량제한 값에 대한 사전 분석을 통해 환자 별 최적의 세기조절방사선치료 기법을 선정하여 적용하는 것이 타당하다고 생각된다.

• Radiation Oncology Journal
• /
• 제25권1호
• /
• pp.54-61
• /
• 2007

목 적: 본 연구의 목적은 전립선암 환자의 방사선 치료 시 표적의 정확한 위치를 찾기 위해 표지(marker)를 삽입한 경우 방사선치료계획 시 촬영한 CT 영상과 매 치료 시 온보드 영상장치(on-board imager, OBI)로부터 획득된 직교 kV X선 영상을 이용하여 표지의 위치를 계산하고 자동으로 맞춤을 수행하여 환자 셋업 오차를 보정하도록 하는 방법을 개발하는 것이다. 대상 및 방법: 세 개의 금 표지를 환자 전립선의 기준 위치에 삽입한 후 CT 모의치료기를 이용하여 2 mm 슬라이스 간격으로 CT 영상을 획득하였으며 매 치료 전에 환자 셋업 보정을 위하여 OBI를 이용하여 직교하는 kV X선 환자 영상을 획득하였다. CT 및 kV X선 영상 내 표지 정보 및 좌표 값 추출을 위하여 화소값의 문턱값 처리, 필터링, 외곽선 추출, 패턴 인식 등 다수의 영상처리 알고리듬을 적용하였다. 각 표지들 위치의 대표값으로 삼각형의 무게중심 개념을 이용하였으며 기준 CT 영상 및 직교 kV X선 영상으로부터 각각 무게중심의 좌표를 구한 후 그 차이를 보정해야 할 셋업의 오차로 계산하였다. 알고리듬의 건전성(robustness) 평가를 위해 팬텀을 이용하여 계산된 CT 및 kV X선 영상의 무게중심이 실제 지정된 위치와 일치하는지 여부를 확인하였으며, 본원에서 방사선 치료를 시행한 네 명의 전립선암 환자에 대상으로 치료 직전 촬영한 38 내지 39쌍의 kV X선 영상에 대하여 알고리듬을 적용한 후 OBI 프로그램에서 제공되는 2차원-2차원 맞춤 결과와 비교하였다. 결 과: 팬텀 실험 결과 실제 값과 CT 영상 및 직교 kV X선 영상으로부터 계산된 무게 중심 좌표 값이 1 mm 오차 내에서 일치함을 확인할 수 있었다. 환자 영상에 적용한 경우에도 모든 영상에 대하여 성공적으로 각 표지의 위치를 계산할 수 있었으며 2차원-2차원 맞춤 기능을 이용하여 계산된 셋업 오차와 비교해본 결과 1 mm 범위 내에서 일치함을 확인할 수 있었다. 본 알고리듬을 이용하여 계산한 결과 셋업 오차는 전후(AP) 방향으로 환자별로 작게는 $0.1{\pm}2.7\;mm$에서 크게는 $1.8{\pm}6.6\;mm$까지, 상하(SI) 방향으로 $0.8{\pm}1.6\;mm$에서 $2.0{\pm}2.7\;mm$, 좌우(Lat) 방향으로 $-0.9{\pm}1.5\;mm$에서 $2.8{\pm}3.0\;mm$까지였으며 환자에 따라 그 편차의 차이가 있었다. 결 론: 제안된 알고리듬을 이용하여 1회 셋업 오차를 평가하는 데 소요되는 시간은 10초 미만으로서 임상 적용 시 환자 셋업 시간을 줄이고 주관성을 배제하는 데 도움이 될 수 있을 것으로 기대된다. 그러나 온라인 환자 셋업 보정 시스템에 적용하기 위해서는 선형가속기의 제어 시스템에 통합되는 것이 필요하다.

• 한국보건간호학회지
• /
• 제9권1호
• /
• pp.83-102
• /
• 1995

As the society is being industrialized, the fast-paced economic development that has caused substantial increase in cerebrovascular and coronary artery diseases and the industrial development and increased use of means of transportation have resulted in the rapid rise of incidents in external injuries as well. So the pubic has become acutely aware of the need for fast and effective emergency care delivery system. The goal of emergency care delivery system is to meet the emergency care needs of patients. The emergency care delivery system is seeking to efficiently satisfy the care needs of people. Therefore the purpose of this study is designed to develop an effective programs for emergency care delivery system in Korea. The following specific objectives were investigated. This emergency care delivery system must have the necessary man power, for transfering the patients, communication net work, and emergency care facilities. 1) Man power Emergency care requires n0t only specialized traning in the emergency treatment but also knowledge and experience i11 other related area, so emergency care personnel traning program should be designed in order to adapt to the specific need of emergency patients. It will be necessary to ensure professional personnel who aquires the sufficient traning and experience for emergency care and to look for legal basis. We have to develop re-educational programs for emergency nurse specialist. They should be received speciality of emergency nursing care so that they will work actively and positively in emergency part. Emergency medical doctor and nurse specialist should be given an education which is related in emergency and critical care. Emergency care personnel will continue to provide both acute and continuing care as partner with other medical team. 2) Transfering the patients. Successful management of pre-hospital care requires adequate traning for the emergency medical technician. Traning program should be required to participate in a actual first aids activites in order to have apportunities to acquire practical skills as well as theoretical knowledge. The system of emergency medical technician should be remarkablly successful with first responder firefighters. Establishing this system must add necessary ambulances operating at any given time. It will be necessary to standardize the ambulance size and equipment. Ambulance should be arranged with each and every fire station. 3) Communication net work. The head office of emergency commumication network should be arranged with the head office of fire station in community. It is proposed that Hot-line system for emergency care should be introduce. High controlled ambulance and thirtial emergency center should simultaneously equip critical-line in order to communication with each other. Ordinary ambulance and secondary emergency facility should also simultaneously equip emergency-line in order to communication with each other. 4) Emergency care facilities. Primary emergency care facilities should be covered with the ambulatory emergency patients-minor illness and injuires. Secondary emergency care facilities should be covered with the emergency admission patients. Third emergency care center should be covered with the critical patients who need special treatments and operation. Secondary and third emergency care facilities should employ emergency medical doctor and emergency nurse specialist to treat in-patients with severe and acute illness and multiple injuires. It should be fashioned for a system of emergency facilities that meets emergency patients needs. Provide incentives for increased number of emergency care facilities with traning in personal/clinical emergency care. 5) Finance It is recommended to put the finance of a emergency care on a firm basis. The emergency care delivery system should be managed by the government or accreditted organizations. In order to facilitate this relevant program the fund is needed for more efficient and effective emergency researchs, service, programs, and policy. 6) Gaining understanding and co-operation of pubic It is also important to undertake pubic education to improve understanding of first aids and C. P. R of individuals, communities and business. It is proposed that teachers and health officers be certified in C. P. R. The C. P. R education can be powerful influence save lives. Lastly appropriate emergency care information must be provided to the pubic for assisting them in choosing emergency care.

• 한국응급구조학회지
• /
• 제5권1호
• /
• pp.37-51
• /
• 2001

This study is aimed at examining the ethical values of EMT students. The results below are based on the revised questionnaires, which can be applicable to EMT from the original questionnaires developed by Lee(1990), with a sample of 124 students consisting of 63 first and 61 second year students, conducted November 2-8, 2001. Data were analyzed using SPSS in terms of means, standard deviations, t-test, ANOVA, Pearson's correlation coefficient. The results are as follows: 1. In the area of Human life, all subjects showed utilitarian disposition. All respondents perceived the item "When patients recognizing there is no hope for survival ask for euthanasia, it is ethically right to accommodate their opinions." as the most utilitarian item, whereas they perceived the item "When an hopeless patient is on cardiac arrest, it is ethically right to do CPR as the most deontoogical item. 2. In the area of patient relationship, all students of two groups took on deontoogical characteristics, but there were no statistically significant differences between two groups. All students perceived an item "EMT have to keep it secret if patients disclose their suicide intentions and ask for absolute secrecy" the most utilitarian item, whereas they perceived an item "Even though patients act and speak in a very rude manner, EMT people should do their best to provide care for patients." as the most deontoogical item. 3. In the area of task relationship, first year students perceived an item "Given time limitations, it is ethically right to give priority to the patients who can be rehabilitated over the patients who can't be fully recovered." as the most utilitarian item, whereas second year students perceived an item "Under no circumstances should any placebo be administered to patients." as the most utilitarian item. All students perceived an item "When EMT students see an unconscious person lying in the street, they have to give him/her emergency treatment." as the most deontoogical item. 4. In the area of coworker relationship, all students of two groups took on deontoogical disposition, but there were no significant differences between two groups. All students of two groups perceived an item "Suppose you are regarded as the person who would be promoted. However, you think that your coworker is more competent than you. In that case you should tell your supervisor about your coworker." as the most utilitarian item. First year students perceived an item, whereas second year students perceived an item "When you observe coworkers' misconduct at work, it is ethically right to ignore their misdeeds." as the most deontoogical item. 5. This study demonstrated that for the first year students, there is a correlational relationship between areas of human life and task relationship, and between areas of task relationship and coworker relationship, whereas for the second year students, there is a correlational relationship between areas of human life and task relationship. 6. In areas of human life and task relationship, there are significant differences according to attitudes toward EMT and attendance at ethics training sessions. In the area of coworker relationship, there are significant differences according to religion, attendance at ethics training sessions, and a code of ethics. Recommendations for future research, 1. Sample items to measure ethical values and the instrument tailored to the needs of EMT should be developed. 2. A longitudinal study to track ethical value changes according to the amount of work experience is needed. 3. A code of ethics and/or ethics training, which could apply in actual situations, should be implemented.

• 환경영향평가
• /
• 제28권5호
• /
• pp.492-506
• /
• 2019

공용화기사격장 내 중금속 오염물은 대부분 탄두원형으로 존재하거나 입자로 존재하는 금속조각편이며 이들 미세한 금속입자들은 오랜 기간 풍화되어 표면이 산화물 또는 탄산화물로 존재할 가능성이 매우 높다. 특히 사격장 토양에서 대표적 오염물질인 납은 연성이 높아 무르고 잘 늘어나므로 더 미세입자로 존재한다. 따라서 물리적 세척 실험으로 입도분석, 입경별 중금속농도, 금속물질 성분분석, 비중, 자력, 부상선별의 적용성 평가를 실시하였다. 금속파편의 경우 FESEM분석과 무게측정결과 납은 무른 특성에 따라 얇게 조각나고 편모양의 구조로 비슷한 면적의 구형 토양보다 무게가 더 적게 나가는 것을 확인하였으며 비중선별 적용성이 높은 것을 확인할 수 있었다. 이 결과를 적용하여 하이드로사이클론을 이용한 정화효율평가 결과 1회 71%, 2회 80%, 3회 91%의 누적 정화효율을 보였다. 이에 비해 자력선별은 17%의 낮은 효율을 보였고 부상선별은 입경 0.5 mm 미만으로 선별한 대상토는(-35 mesh) 39%로 비교적 높은 효율을 보였으나 입경 2 mm 미만으로 선별한 대상토의(-10 mesh) 효율은 16%에 불과하였다. 토양세척의 대상 처리입경은 2 mm ~ 0.075 mm로 입도구분을 추가로 하여 실규모 장치에 적용하여야 하며 이는 설치비용과 공정이 추가로 구성됨에 따른 관리가 필요할 것으로 분석되었다. 결과적으로 공용화기사 격장 오염의 토양정화는 탄두 원형을 유지한 탄두는 5.56 mm 이상으로 자갈입경보다 크므로 고비중을 이용한 비중선별을 실시하고, 금속파편으로 존재하는 오염물질은 얇게 조각나고 편모양의 구조로 같은 입경의 토양보다 무게가 더 적음에 따라 토양세척의 하이드로사이클론을 이용하여 분리하여 처리할 수 있음을 확인할 수 있었다.

• 마케팅과학연구
• /
• 제18권3호
• /
• pp.59-88
• /
• 2008

Digital Convergence means integration between industry, technology, and contents, and in marketing, it usually comes with creation of new types of product and service under the base of digital technology as digitalization progress in electro-communication industries including telecommunication, home appliance, and computer industries. One can see digital convergence not only in instruments such as PC, AV appliances, cellular phone, but also in contents, network, service that are required in production, modification, distribution, re-production of information. Convergence in contents started around 1990. Convergence in network and service begins as broadcasting and telecommunication integrates and DMB(digital multimedia broadcasting), born in May, 2005 is the symbolic icon in this trend. There are some positive and negative expectations about DMB. The reason why two opposite expectations exist is that DMB does not come out from customer's need but from technology development. Therefore, customers might have hard time to interpret the real meaning of DMB. Time is quite critical to a high tech product, like DMB because another product with same function from different technology can replace the existing product within short period of time. If DMB does not positioning well to customer's mind quickly, another products like Wibro, IPTV, or HSPDA could replace it before it even spreads out. Therefore, positioning strategy is critical for success of DMB product. To make correct positioning strategy, one needs to understand how consumer interprets DMB and how consumer's interpretation can be changed via communication strategy. In this study, we try to investigate how consumer perceives a new product, like DMB and how AD strategy change consumer's perception. More specifically, the paper segment consumers into sub-groups based on their DMB perceptions and compare their characteristics in order to understand how they perceive DMB. And, expose them different printed ADs that have messages guiding consumer think DMB in specific ways, either cellular phone or personal TV. Research Question 1: Segment consumers according to perceptions about DMB and compare characteristics of segmentations. Research Question 2: Compare perceptions about DMB after AD that induces categorization of DMB in direction for each segment. If one understand and predict a direction in which consumer perceive a new product, firm can select target customers easily. We segment consumers according to their perception and analyze characteristics in order to find some variables that can influence perceptions, like prior experience, usage, or habit. And then, marketing people can use this variables to identify target customers and predict their perceptions. If one knows how customer's perception is changed via AD message, communication strategy could be constructed properly. Specially, information from segmented customers helps to develop efficient AD strategy for segment who has prior perception. Research framework consists of two measurements and one treatment, O1 X O2. First observation is for collecting information about consumer's perception and their characteristics. Based on first observation, the paper segment consumers into two groups, one group perceives DMB similar to Cellular phone and the other group perceives DMB similar to TV. And compare characteristics of two segments in order to find reason why they perceive DMB differently. Next, we expose two kinds of AD to subjects. One AD describes DMB as Cellular phone and the other Ad describes DMB as personal TV. When two ADs are exposed to subjects, consumers don't know their prior perception of DMB, in other words, which subject belongs 'similar-to-Cellular phone' segment or 'similar-to-TV' segment? However, we analyze the AD's effect differently for each segment. In research design, final observation is for investigating AD effect. Perception before AD is compared with perception after AD. Comparisons are made for each segment and for each AD. For the segment who perceives DMB similar to TV, AD that describes DMB as cellular phone could change the prior perception. And AD that describes DMB as personal TV, could enforce the prior perception. For data collection, subjects are selected from undergraduate students because they have basic knowledge about most digital equipments and have open attitude about a new product and media. Total number of subjects is 240. In order to measure perception about DMB, we use indirect measurement, comparison with other similar digital products. To select similar digital products, we pre-survey students and then finally select PDA, Car-TV, Cellular Phone, MP3 player, TV, and PSP. Quasi experiment is done at several classes under instructor's allowance. After brief introduction, prior knowledge, awareness, and usage about DMB as well as other digital instruments is asked and their similarities and perceived characteristics are measured. And then, two kinds of manipulated color-printed AD are distributed and similarities and perceived characteristics for DMB are re-measured. Finally purchase intension, AD attitude, manipulation check, and demographic variables are asked. Subjects are given small gift for participation. Stimuli are color-printed advertising. Their actual size is A4 and made after several pre-test from AD professionals and students. As results, consumers are segmented into two subgroups based on their perceptions of DMB. Similarity measure between DMB and cellular phone and similarity measure between DMB and TV are used to classify consumers. If subject whose first measure is less than the second measure, she is classified into segment A and segment A is characterized as they perceive DMB like TV. Otherwise, they are classified as segment B, who perceives DMB like cellular phone. Discriminant analysis on these groups with their characteristics of usage and attitude shows that Segment A knows much about DMB and uses a lot of digital instrument. Segment B, who thinks DMB as cellular phone doesn't know well about DMB and not familiar with other digital instruments. So, consumers with higher knowledge perceive DMB similar to TV because launching DMB advertising lead consumer think DMB as TV. Consumers with less interest on digital products don't know well about DMB AD and then think DMB as cellular phone. In order to investigate perceptions of DMB as well as other digital instruments, we apply Proxscal analysis, Multidimensional Scaling technique at SPSS statistical package. At first step, subjects are presented 21 pairs of 7 digital instruments and evaluate similarity judgments on 7 point scale. And for each segment, their similarity judgments are averaged and similarity matrix is made. Secondly, Proxscal analysis of segment A and B are done. At third stage, get similarity judgment between DMB and other digital instruments after AD exposure. Lastly, similarity judgments of group A-1, A-2, B-1, and B-2 are named as 'after DMB' and put them into matrix made at the first stage. Then apply Proxscal analysis on these matrixes and check the positional difference of DMB and after DMB. The results show that map of segment A, who perceives DMB similar as TV, shows that DMB position closer to TV than to Cellular phone as expected. Map of segment B, who perceive DMB similar as cellular phone shows that DMB position closer to Cellular phone than to TV as expected. Stress value and R-square is acceptable. And, change results after stimuli, manipulated Advertising show that AD makes DMB perception bent toward Cellular phone when Cellular phone-like AD is exposed, and that DMB positioning move towards Car-TV which is more personalized one when TV-like AD is exposed. It is true for both segment, A and B, consistently. Furthermore, the paper apply correspondence analysis to the same data and find almost the same results. The paper answers two main research questions. The first one is that perception about a new product is made mainly from prior experience. And the second one is that AD is effective in changing and enforcing perception. In addition to above, we extend perception change to purchase intention. Purchase intention is high when AD enforces original perception. AD that shows DMB like TV makes worst intention. This paper has limitations and issues to be pursed in near future. Methodologically, current methodology can't provide statistical test on the perceptual change, since classical MDS models, like Proxscal and correspondence analysis are not probability models. So, a new probability MDS model for testing hypothesis about configuration needs to be developed. Next, advertising message needs to be developed more rigorously from theoretical and managerial perspective. Also experimental procedure could be improved for more realistic data collection. For example, web-based experiment and real product stimuli and multimedia presentation could be employed. Or, one can display products together in simulated shop. In addition, demand and social desirability threats of internal validity could influence on the results. In order to handle the threats, results of the model-intended advertising and other "pseudo" advertising could be compared. Furthermore, one can try various level of innovativeness in order to check whether it make any different results (cf. Moon 2006). In addition, if one can create hypothetical product that is really innovative and new for research, it helps to make a vacant impression status and then to study how to form impression in more rigorous way.

• 한국산림과학회지
• /
• 제2권1호
• /
• pp.19-28
• /
• 1962

전라남도(全羅南道)의 각군(各郡)에서 대표(代表)가 될 만한 죽림(竹林) 20개(個)를 선정(選定)코 죽간(竹桿)의 몇가지 형질(形質)과 축적(蓄積)에 대(對)하여 조사(調査) 고찰(考察)한 결과(結果)를 간추려 보면 다음과 같다. (1) 반당(反當) 평균(平均) 죽림(立竹) 본수(本數)는 벌죽(伐竹)의 전(前)의 경우에 전체(全體)(20개림(個林)) 평균(平均)으로 1,183본(本)이고, 개별적(個別的)으로는 해남군(海南郡) 민씨림(閔氏林)의 1840본(本)이 최고(最高), 장성군(長城郡) 이씨림(李氏林)과 보성고음(寶城古邑)의 박씨림(朴氏林)의 875본(本)이 최저(最低)였고, (2) 1960죽년도(竹年度)의 흉년(凶年)에 이어 1961죽년도(竹年度)는 대풍년(大豊年)으로 모죽(母竹) 본수(本數)에 대(對)한 신줄(新竹)의 백분(百分) 대조비(對照比)가 58.7에 달(達)했으며, 그 최고(最高)는 110.5 최저(最低)는 16.8의 치(値)를 주고 있다. (3) 안고(眼高) 주위(周圍)는 전체(全體) 평균(平均)이 6.5 촌(寸)이고, 극치(極値)로는 11.7 촌(寸)가 최고(最高)이며, 신죽(新竹)의 평균치(平均値)는 6.3 촌(寸) 모죽(母竹)의 치(値)는 6.6 촌(寸)로 신죽(新竹)의 경우가 0.3 촌(寸)나 감소(減少)하고 있다. (4) 절간장(節間長)은 전체(全體) 평균(平均)이 9.8 촌(寸), 극치(極値)는 최고(最高)가 12.8촌(寸), 최저(最低)가 7.1촌(寸)를 기록(記錄)하고 있다. 또 신죽(新竹)의 평균치(平均値)는 9.2 촌(寸)로서 모죽(母竹)의 평균(平均) 9.8 촌(寸)보다 0.6 촌(寸)나 낮은 치(値)를 보여 주고 있다. (5) 축적(蓄積)은 전체평균(全體平均)이 반당(反當) 271속(束)이고, 개별(個別) 최고치(最高値)는 445속(束), 최저치(最低値)는 126속(束)으로 319속(束)이란 큰 교차(較差)를 주고 있다. (6) 일본(日本)의 상전(上田)이 말하는 양죽림(良竹林) 표준(標準)에 완전(完全)히 통과(通過)할 수 있는 죽림(竹林)이란 20개림(個林) 중(中) 1개림(個林)에 불과(不過)하나 표(表) 9에 열거(列擧)한 8개림(個林)은 양죽림(良竹林)으로 추천(推薦) 하더라도 아우런 손색(遜色)이 없을 것으로 사료(思料)됨. (7) 본조사(本調査)를 통(通)하여 본도(本道)의 죽림(竹林) 관리(管理) 상태(狀態)는 대체(大體)로 원시적(原始的)이며 약탈적(掠奪的)인 경영(經螢) 방식(方式)을 취(取)하고 있음을 알았는데 그래도 이 정도(程度)의 죽림(竹林)을 얻을 수 있었다는 것은 앞으로 구태(舊態) 의연(依然)한 관리(管理) 방식(方式)을 탈피(脫皮)하고 과학적(科學的)인 경영(經螢) 방식(方式)을 도입(導入)할 수 있다면 상당(相當)한 증산(增産)을 기대(期待)할 수 있으리라고 믿는다.

• 한국방사선학회논문지
• /
• 제14권3호
• /
• pp.203-209
• /
• 2020

본 연구는 렉셀 감마나이프 퍼펙션 모델에서 다양한 무게를 가진 자동환자이송장치의 안정성 즉 정렬됨 평가를 위함이다. 퍼펙션 자동환자이송장치의 정렬됨을 평가하기 위해서 부산, 경남 소재 3개 대학병원에서 교정된 서비스 다이오드 테스트 도구를 사용하여 다중 빔의 방사선 초점과 감마나이프 교정 중심점의 일치성에 대한 방사상 편차 △r을 측정하여 평균하였다. 자동환자이송장치 상에 무게 없이 모든 콜리메이터 4, 8, 16 mm에 대한 중심 다이오드에 조사와 4 mm 콜리메이터에 대한 짧은 다이오드와 긴 다이오드에 조사한 경우를 살펴보면 중심 다이오드에 4, 8, 16 mm 콜리메이터 각각 조사 시 검증 차이 즉 방사상 편차의 평균은 각각 0.058 ± 0.023, 0.079 ± 0.023, 0.097 ± 0.049 mm로 나타났고, 중심 다이오드, 짧은 다이오드와 긴 다이오드에 4 mm 콜리메이터 조사 시 방사상 편차의 평균은 각각 0.058 ± 0.023, 0.078 ± 0.01, 0.070 ± 0.023 mm로 나타났다. 무게 없이 짧은 다이오드와 긴 다이오드에 8, 16 mm 조사 시 방사상 편차의 평균은 각각 0.07 ± 0.003(8 mm sd), 0.153 ± 0.002 mm(16 mm sd)와 0.031 ± 0.014(8 mm ld), 0.175 ± 0.01 mm(16 mm ld)로 측정되었다. 다양한 무게 50 ~ 90 kg을 자동환자이송장치에 올린 경우 4, 8, 16 mm에 대한 중심 다이오드에 조사 시 방사상 편차의 평균은 각각 0.061±0.041 ~ 0.075±0.015, 0.023±0.004 ~ 0.034±0.003, 0.158±0.08 ~ 0.17±0.043 mm를 나타냈다. 또한 동일한 상황에서 4, 8, 16 mm에 대한 짧은 다이오드에 조사 시 방사상 편차의 평균은 각각 0.063±0.024 ~ 0.07±0.017, 0.037±0.006 ~ 0.059±0.001, 0.154±0.03 ~ 0.165±0.07 mm로 나타났다. 그리고 4, 8, 16 mm에 대한 긴 다이오드에 조사 시 방사상 편차의 평균이 각각 0.102±0.029 ~ 0.124±0.036, 0.035±0.004 ~ 0.054±0.02, 0.183±0.092 ~ 0.202±0.012 mm로 측정되었다. 수행된 모든 검증 결과는 제조사의 허용 편차 기준에 적합함을 확인할 수 있었다. 실제 치료 환경을 흉내 낸 자동환자이송장치에 올린 다양한 무게에 따른 정렬됨의 측정 결과 무게 의존성은 무시할 수 있음을 알 수 있었다. 저자들은 다양한 무게에 따른 자동환자이송장치의 검증 테스트가 렉셀 감마나이프 퍼펙션의 통상적인 정도관리를 위하여 적합한 것으로 확인하였다.

• 한국직업건강간호학회지
• /
• 제3권호
• /
• pp.54-70
• /
• 1993

According as the automation of clerical work(OA ; Office Automation) develops, the use of VDT(Visual or Video Display Terminal) is increasing suddenly. But, in proportion to the spread of office automation(OA tendency), the self-conciousness syptom attendant upon the work is appearing also (Kim, Jung Tae, Lee, Young Ook, 1990). The apparatuses of office enable the clerical workers to be convenient and perform mass businesses. But, they are increasing the opportunity to be exposed to VDT syndrom, techno stress, computer terminal disease, pain by muscle strain(RSI), bradycausia of noise nature, and electromagnetic waves, etc. which are referred to as the new type of occupational diseases to the workers. It is the real situation that the workers to use VDT is complaining of the physical inconvenience sense in the recent newspaper and literature, it is the point of time that the sydrome to come from VDT use and computer terminal disease, etc. must be classified into the occupational disease(Lee, Kwang Young 1990, Lee, Kyoo Hak 1990, Lee, Won Ho 1991, Lee, Si Young 1991, Lee, Joon 1991, Choi, Young Tae 1991, Heo, Seung Ho 1989). In addition, it is the real situation that the scientifitic study result about the scope that electromagnetic waves has influence on the human body has not been suggested yet, and criticism on the stable exposure permission standard about electromagnetic waves to be emitted from VDT and on the problem in the health about electromagnetic waves is continuing. (IEEE Spectrum, 1990). In addition according to the experience of nursery business of industry field, it is the real situation that the patients who consult complaining of physical and mental inconvenience sence, among the users of apparatus of office automation, are reaching 10% of the patients coming to doctor's room. Therefore, it is necessary to confirm the self-consciousness symptom that the clerical workers complain of multilaterally with the actual state examination about the use of the apparatuses of offices automaton. Thus, this study was tried as th basic data for the cosultation and education for the maintenance and furtherance of the health of workers as the nurse of industry field, by confirming the contents of self-consciousness symptom attendant upon the use of the apparatus for office outomation making the financial institution in which the spparatus for office automation in most frequently used as the subject, and by examining whether there is the difference according to the subject of study, the data were collected, by using the questionnaire method, making 200 workers who consented to the study participation as the subject, among the persons who have spent over 3 months since they used the apparatuses for office automation and didn't receive the treatment in hospital due to the clerical disease for recent 3 years. The period of data collection was from Oct. 9, 1991 to Oct. 12. As for the measurement instrument about the complaint if self-consciousness symptom attendant upon the use of apparatuses fo office automation, the question item on the complaint symptom of health problem attendant upon the treatment of VDT that Kim(1991) developed and on CMI health problem and the question items on the fatigue degree due to industry were used by previous examination to 25 persons. Collected data were analyzed with the statistical method such as percentage, arithmetic mean, Person correlation coeffient, Kai square verfication, t-test, ANOVA, etc. by using SPSS/PC+ program, and the result is as follows : 1. The self-consciousness symptom that the clerical workers complained of most frequetly appeared high in 'My eyes are tired'(99.4%), 'I feel fatigue and weariness'(99.4%), 'I feel that my head is heavy5(90.0%), 'eyesight fell'(88.8%), 'I have a stiff neck'(88.8%), 'I fell pain in the shoulder'(85.0%), 'I feel cold and painful in the eyes'(76.9%), 'I feel the dry sense of eyeball'(76.2%), 'My nerves are edgy, and I an fretful, (75.6%), 'I feel pain in the waist'(73.2%) and 'I fell pain in the back'(72.8%). It emerged that the subject use the apparatuses for office automation complained of self-consciousness symptoms related to visual symptoms and musculoskeletal symptoms. 2. As for the general feature of examination subjects, the result to see the distribution by classifying into sex, age, school career, use career of apparatuses for office automation, skillfulness degree of the use of apparatus for office automation, use hours of the apparatuses for office automation per 1 day, type of business of the apparatus for office automation, rest hours during the use of apparatus for office automation, satifaction degree of business of office automation, and work circumstance, etc. emerged as follows : As for the sex of subjects, the distribution showed that men were 58.8% and women were 41.3%, Age was average 26.9. As the distribution of school career, the distribution showed that4below the graduation of high school' was 58.8%, 'graduation from junior college-university' was 35.0%, and 'over graduate school' was 6.3%. In the question to ask the existence or non-existence of experience of health consultation in connection with the work of office automation, the response that I had the consultation exprience and I feel the necessity emergerd as 90.1% And, the case that the subject who didn't wear the glasses or lens before using the OA apparatus wear glasses or lens after using OA apparatus emerged as 28.3% of whole. As for the existence or non-existence of use career of OA apparatus, the case under 3 years was highest as 52. 7%. As for the skillfulnness degree about the use of apparatus for office automation, most of them are skillful with the fact that 'common' was 44.4%, 'skill' was 42.5%, and 'unskillful' was 13.1% As for the use average hours of the apparatus for office automation per 1 day, the distribution showed that the case under 3-6 hours was 33.1%, the case under 6-9 hours was 28.1%, the case under 3 hours was 30.6%, and the case over 9 hours was 8.1% Main OA business and the use hours for 1 day showed in the order of keeping and retrieval, business of information transmission(162min), business of information transmission(79.3 min), business of document framing(55.5 min), and business of duplication and printing(25.4min). as for the rest during the use of apparatus for affice automation, that I take rest occasion demands the major portion, but that I take after completing the work emerged as 33.8%. Though the subiness gets to be convenient by the use of the apparatus for of office automation, respondents who showed the dissatisfaction about the present OA business emergd high as 78.1%. The work circumstances of each office was good with the fact that the temperature of office was 21.8, noise was average 42.7db, and the illumination was average 364.4 lx, in the light of ANSi/HFS 100 Standard. 3. Sight syptom, musculoskeletal symptom, skin and other symptoms showed the significant difference according to the extent of skillfulness of the apparatus for office automation. All the symptoms exept skin symptom showed the difference according to the use hours of the apparatus for office automation. All the question items exept the sytoms of digestive organs and the rest hours during the apparatus for office automation showed the signicant difference. The question item which showed the signicant difference from the satisfaction degree of present OA business showed the significant difference from all the question item classified into 6 groups. But, age and school career didn't significant difference from the complaint of any self-consciousness symptoms.