• 제목/요약/키워드: Actual power generation value

검색결과 34건 처리시간 0.026초

관측 유량 자료를 이용한 소수력 잠재량 평가에 대한 사례연구 (Case Study : Assessment of Small Hydropower Potential Using Runoff Measurements)

  • 정성은;김진영;강용혁;김형수
    • 한국태양에너지학회 논문집
    • /
    • 제38권4호
    • /
    • pp.43-54
    • /
    • 2018
  • In this study, we assessed dependency of small hydropower potentials on the two different runoff such as the estimated runoff based on the rainfall amounts and measured runoff. The hydpropower potentials were evaluated using actural power generations taken from Deoksong, Hanseok, and Socheon small hydropower plants over Han and Nakdong river basins, respectively. As a result of comparing the actual power generation amount with the potential amount based on the rainfall amount and the estimated amount based on the observed flow amount by each small hydroelectric power plant, the degree of latent small hydro energy by the observed flow was confirmed to be high. It is confirmed that the potential hydroelectric power generation rate is estimated to be about average 30%Point higher than the actual generation amount as a result of the measured flow rate rather than using the rainfall amount. Based on this, a method for improving the degree of the actual generation amount is proposed.

풍력 발전을 위한 분산형 전원전력의 단기예측 모델 설계 (Design of short-term forecasting model of distributed generation power for wind power)

  • 송재주;정윤수;이상호
    • 디지털융복합연구
    • /
    • 제12권3호
    • /
    • pp.211-218
    • /
    • 2014
  • 최근 풍력에너지는 풍력터빈의 지능화뿐만 아니라 풍력 발전량 예측 부분에서 컴퓨팅과의 결합이 확대되고 있다. 풍력 발전은 기상상태에 따라 출력변동이 심하고 출력 예측이 어려워 효율적인 전력 생산을 위해서 신재생에너지를 전력계통에 안정적으로 연계할 수 있는 기술이 필요하다. 본 논문에서는 분산형 전원의 예측정보를 향상시켜 예측한 발전량과 실제 발전량의 차이를 최소화하기 위한 분산형 전원전력의 단기예측 모델을 설계한다. 제안된 모델은 단기 예측을 위해서 물리모델과 통계모델을 결합하였으며, 물리모델에서 생산된 격자별 예측값 중 예측 지점내 예측지점의 값을 추출하고, 물리 모델 예측값에 통계모델을 적용하여 발전량 산정을 위한 최종 기상 예측값을 생성한다. 또한, 제안 모델에서는 실시간 기상청 관측자료와 실시간 중기 예측 자료를 입력 자료로 사용하여 단기 예측모델을 수행한다.

철도인프라용 태양광발전시스템 확대를 위한 기상정보 활용 발전량 예측 비교 연구 (Comparative Study to Predict Power Generation using Meteorological Information for Expansion of Photovoltaic Power Generation System for Railway Infrastructure)

  • 유복종;박찬배;이주
    • 한국철도학회논문집
    • /
    • 제20권4호
    • /
    • pp.474-481
    • /
    • 2017
  • 국내에서 태양광 발전설비 설계 시 설계 단계에서의 태양광발전소의 발전량 예측은 국내 현장임에도 불구하고 PVsyst, PVWatts 등 해외 발전량 예측 프로그램과 해외 기상 자료를 이용하여 발전량을 예측하는 경우가 대부분을 차지하고 있는 실정이다. 본 논문에서는 기상정보를 활용한 발전량 예측 비교 연구를 위하여 현재 운영중인 2개 지역의 국내 태양광발전소를 대상지로 선정하였다. 발전량 예측 프로그램인 PVsyst를 활용하여 Meteonorm 7.1과 NASA-SSE의 해외 기상정보를 이용한 발전량 예측값과 국내 기상청 (Korea Meteorology Administration) 기상정보를 활용한 발전량 예측 정확성을 비교하였다. 추가적으로, 기상자료 비교 분석을 통한 발전량 예측 개선 방안을 연구하고, 최종적으로 실제 발전량과의 비교 분석을 통해 기후요소가 고려된 태양광 발전량 예측 수정 모델을 제시하였다.

클라우드 컴퓨팅 환경에 적합한 그룹 키 관리 프로토콜 (Group key management protocol adopt to cloud computing environment)

  • 김용태;박길철
    • 디지털융복합연구
    • /
    • 제12권3호
    • /
    • pp.237-242
    • /
    • 2014
  • IT 서비스 및 컴퓨팅 자원을 기반으로 인터넷 서비스를 제공하는 클라우드 컴퓨팅이 최근 큰 관심을 받고 있다. 그러나 클라우드 컴퓨팅 시스템에 저장되는 데이터는 암호화한 후 저장되어도 기밀 정보가 유출되는 문제점이 있다. 본 논문에서는 사용자가 클라우드 컴퓨팅 시스템에서 제공되는 데이터를 제 3자가 임의로 악용하는 것을 예방하기 위한 그룹 키 관리 프로토콜을 제안한다. 제안된 프로토콜은 임의의 사용자가 원격에서 클라우드 컴퓨팅 서버에 접근할 경우 서버에 존재하는 사용자 인증 데이터베이스내 사용자 정보를 일방향 해쉬 함수와 XOR 연산을 사용하여 사용자 인증을 제공받는다. 도한 사용자의 신분확인 및 권한을 연동하여 클라우드 컴퓨팅 시스템에 불법적으로 접근하는 사용자를 탐색함으로써 클라우드 컴퓨팅의 사용자 보안 문제를 해결하고 있다.

Prediction of Solar Photovoltaic Power Generation by Weather Using LSTM

  • Lee, Saem-Mi;Cho, Kyu-Cheol
    • 한국컴퓨터정보학회논문지
    • /
    • 제27권8호
    • /
    • pp.23-30
    • /
    • 2022
  • 딥러닝은 주가 및 농산물 가격 예측과 같이 데이터를 분석해 일련의 규칙을 발견하고 미래를 예상해 우리의 삶에서 다양한 도움을 주고 있다. 본 연구는 태양광 에너지 사용의 중요성이 늘어나는 상황에서 기상에 따른 태양광 발전 실적을 딥러닝을 통해 분석하고 발전량을 예측한다. 본 연구에서는 시계열 데이터 예측에서 두각을 나타내고 있는 LSTM(Long Short Term Memory network)을 사용한 모델을 제안하며 이미지를 비롯한 다양한 차원의 데이터를 분석할 때 사용되는 CNN(Convolutional Neural Network)과 두 모델을 결합한 CNN-LSTM과의 성능을 비교한다. 세 가지 모델의 성능은 태양광 발전 실적의 실제값과 딥러닝을 통해 예측한 값으로 MSE, RMSE, 결정계수를 계산하여 비교하였고 그 결과 LSTM 모델의 성능이 가장 우수한 것으로 나타났다. 따라서 본 연구는 LSTM을 사용한 태양광 발전량 예측을 제안한다.

AGC 운용에 있어서의 원격 On-line 최대 증감발율 취득 기법 (Remote On-line Determination of the Load Rate Limit of Generation in AGC)

  • 권순만;전동훈;문원용;김석주
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
    • /
    • pp.119-121
    • /
    • 2000
  • The possibility of a remote on-line determination of the maximum load rates that are basically set at generation plants is investigated in automatic generation control (AGC) system. Energy management system (EMS) generates a test input to a remote power plant to get the samples of the generator output. Then from the samples it can be attempted to determine an approximate value of the load rate limit set by the operator. It is shown in computer simulation that in actual power plants the limit can be approximately determined from the input-output characteristics of the plants for a unit-step input.

  • PDF

The Characteristics of Planar EMI Filter with Bi-Ground Layers Considering Impedance Mismatching

  • Wang, Shishang;Song, Zheng;Lou, Qianceng
    • Journal of Power Electronics
    • /
    • 제16권3호
    • /
    • pp.1200-1208
    • /
    • 2016
  • Planar electromagnetic interference (EMI) filter has significant engineering significance to power electronic system integration and miniaturization. However, the value of differential mode capacitance cannot meet the demand of noise suppression because of the size limit of ceramics. In this case, the EMI filter of novel multilayers is recommended to address this issue. A novel integrated structure of EMI filter based on multilayer ceramic is proposed in this study. The inductance and capacitance of the new structure can be designed separately, which is an advantage in manufacturing. Insertion loss is measured more closely to the actual situation in this study, which is different from the condition where source and load impedances are both 50 Ω. In the process of designing a novel EMI filter, noise impedance is considered. Moreover, the prototype is created and applied to a small switching power supply, which verifies the effectiveness of the developed EMI filter.

초소형 바이너리 발전 플랜트를 위한 Neuro PID 제어 (Neuro PID Control for Ultra-Compact Binary Power Generation Plant)

  • 한건영
    • 한국정보통신학회논문지
    • /
    • 제25권11호
    • /
    • pp.1495-1504
    • /
    • 2021
  • 초소형 바이너리 발전 플랜트는 열원과 냉각원 사이의 저온도차 열에너지를 이용하여 열에너지를 전력으로 변환한다. 실제 발전환경에서 플랜트의 특성치는 환경 조건이나 관련 장비의 부식과 같은 부정적인 영향으로 인해 변동하고, 플랜트 특성치의 변동은 PID 파라미터가 고정된 종래의 PID 제어시스템에서 불안정한 터빈 출력으로 이어진다. 본 논문에서는 플랜트의 특성치 변동에 따라 PID 파라미터를 적응적으로 조정하는 신경망 기반의 Neuro PID 제어시스템을 제안한다. 초소형 바이너리 발전 플랜트의 동작점 근방에서 동특성을 나타내는 이산시간 전달함수 모델을 도출하고, 제안된 제어시스템의 설계 전략을 기술한다. 제안된 Neuro PID 제어시스템을 종래의 PID 제어시스템과 비교하고, 시뮬레이션 결과를 통해 그 유효성을 보인다.

초기 선박 설계시 반체 제도 및 방오 도료에 기인된 속력 구실 평가에 관한 연구 (A Study on Speed Loss Estimation Due to Hull Roughness And A/F Paint in Preliminary Ship Design)

  • 박명규;박수송
    • 한국항해학회지
    • /
    • 제18권2호
    • /
    • pp.159-171
    • /
    • 1994
  • Hull roughness due to corrosions of outer hull and had applications on outer hull paints was analyzed theoretically. It's value which was gainable practically, was studied, and estimated power penalty formular correspon-ding to that value were reviewed. Local roughness penalty and roughness texture penalty that paint manahers in ship yard can easily were compared and studied by dotting actual ships in the issued curves. Losses and benifits of hull roughness & the specification choise of A/F paint which managers of ship maintenance were much interested in have been calculated through actual ships. The paper is illustrating that how much the specification choise and managing of A/F paint have effects on fuel consumption of ship in program. It is urgently required that recent developed antifouling paints of new A/F generation should be adopted to new ship building by big shipping companies in view of the environmental protection and the economical maintenance of ships.

  • PDF

10 kW급 접시형 태양열발전시스템 사업모델 개발 및 운전특성 분석 (Development of 10 kW Dish-Stirling System for Commercialization and Analysis of Operating Characteristics)

  • 김종규;이상남;강용혁
    • 한국태양에너지학회 논문집
    • /
    • 제30권6호
    • /
    • pp.118-124
    • /
    • 2010
  • In order to develop commercial model of 10kW dish-Stirling solar thermal power system, modification for the exiting facility was taken for a year as a Leading Project in KIER. During the project, solar tracking system, control and monitoring system and high durability reflector were developed and long term operation were performed. The solar tracking system was tested for four months to investigate the degree of precision and adapted to the control system for an actual operation from October in 2009. The sun tracking accuracy of ${\pm}4$ mrad using modified control system was obtained and the system operated successfully during the experimental period. The monitoring system displays engine pressure, electric generation amounts, generator RPM, receiver temperatures, and etc. from Stirling engine and weather data of Direct Normal Irradiation, Horizontal Global Insolation, wind speed & direction, and atmosphere temperature from weather station. According to the operating results in a clear sky day, electric power of 6,890 W was generated at the DNI value of 850 W/$m^2$ and the averaged solar-to-electricity efficiency during a whole day reached to 18.99%. From the overall operating results, linear power generation trend could be observed with increasing DNI value. The solar-to-electricity efficiency achieved to 19% around the DNI value of 700 W/$m^2$ and increased to 20% when the DNI value goes up to 900 W/$m^2$.