• KIEAE Journal
• /
• v.13 no.2
• /
• pp.33-38
• /
• 2013

Limited resources for construction material in the Mae-Hae region, a remote Northern Thailand, acted as an impetus to introduce a new way for constructing their dwellings. The new construction material brought new construction methodology, namely, using earth and bamboo which are indigenous materials, readily available for them to use. Using indigenous material at Mae-Hae region was most ecological and logical method for establishing sustainable dwellings both in terms of monetary and ecological reasons. Prior to the construction at Mae-Hae, Thailand, series of experimental tests on the strength of rammed earth were performed off site at our university and also brought soil samples from the actual job site at Mae-Hae for detailed soil analysis. Through the tests, integrity of the earth and characteristics of the soil were established to build a small senior citizen center as an example. This appropriate technology is expected to contribute to the sustainable construction at Mae-Hae.

• Language and Information
• /
• v.16 no.2
• /
• pp.1-15
• /
• 2012

In accounting for the so-called copy raising (CR) in English, the movement perspective has assumed that the embedded subject of the CR verb's sentential complement is raised to the matrix subject, leaving behind its pronominal copy. This kind of movement-based analysis raises both empirical and analytical issues, when considering variations in the pronominal copy constraint. This paper investigates the actual uses of the construction, using online-available corpora. Based on this corpus search, we classify two different types of copy raising predicates (genuine and perception), and discuss their grammatical properties in detail. We suggest that the simple copying rule couched upon movement operations is not enough to capture great variations in the uses of the construction, and show that interpretive constraints, e.g., perceptual characterization condition, play an important role in licensing the construction.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.167-168
• /
• 2018

In this research, the feasibility of wireless senor for compressive strength evaluation was checked by applying on the actual apartment construction site with insulation formwork during winder period. As a result, there was no significant problem on monitoring the compressive strength of the concrete with the sensor. Thus it is considered that the suggested method can be an efficient method for the quality control at the construction site.

• KIEAE Journal
• /
• v.8 no.1
• /
• pp.61-70
• /
• 2008

This paper is focused on studying a pedestrian passage that forms exterior space of the housing unit on diverse prerequisites and convenience of residential environment regards to plans for Multi-family Housing Complex. The paper explores the actual usage of a pedestrian passage installed in Multi-family Housing Complex and examine whether the nature-friendly space that includes the exterior pedestrian passage of the housing unit is being applied variously on a pedestrian passage. In order to obtain an analysis of the current status on case study unit, the study has prepared an analyzing tool for the environment in use for the exterior pedestrian passage and was able to construction problematic points by applying the obtained data. Thanks for the analysis, a comprehensive evaluation on the plans for the pedestrian passage was implemented through correlation with a green tract of land, living space and the exterior pedestrian passage installed in Multi-family Housing Complex.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.309-326
• /
• 2009

De facto standards can be divided into the U.S. group standards' and 'forum and the consortium standard. mainly applies to high-tech industry forums, and a consortium standard of the industry given the nature of the standard are frequently revised, the country Due to the introduction of standard time. Economic loss to consider when in reality, the introduction of national standards of the United States is limited to the desirable standard, and the fact the actual award of standards, national standards, or if you want to introduce standard, each of depending on the type of attitude and strategy for standards by category, based on the characteristics of each body strategy and are needed. Through this study on utilization of de facto standards for national standards, it is researched that major de facto standards bodies status and domestic industrial fields which need utilization of de facto standards for national standards. Through overseas Case, effective usage of de facto standards will be obtained.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.51 no.4
• /
• pp.219-221
• /
• 2002

This paper presents an electric scooter development using blushless DC motor. In recent scooters was to develop for sport leisure and short transportation. Most of scooter are used petroleum gas. This gas scooter has disadvantage to pollute the air. Some of scooters have developed by DC motor which require a brush. However brushless motors have higher maximum speed and greater capacity, save maintenance labour and produce less noise. There is also greater freedom in planing the usage of brushless motors. In this paper we develop an electric scooter driving BLDC motor for design smart system and control speed of scooter with current reference signal to apply voltage to motor by means of three phase inverter. Using accelerator device we generate current reference to control speed and send the current to a MICOM by A/D converter. This MICOM produces the voltage signal and hall sensors signal and PWM controller drive three phase inverter to minimize error between the reference and an actual current.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.12
• /
• pp.1090-1097
• /
• 2000

Predicting building energy use can be useful to evaluate its energy performance. This study proposed empirical approach for predicting building energy use with regression analysis. For the empirical analysis, simple regression models were developed based on the historical energy consumption data as a function of daily outside temperature, the predicting equations were derived for different operational modes and day types, then the equations were applied for predicting energy use in a building. BY selecting a real building as a case study, the feasibilities of the empirical approach for predicting building energy use were examined. The results showed that empirical approach with regression analysis was fairly reliable by demonstrating prediction accuracy of $pm10%$ compared with the actual energy consumption data. It was also verified that the prediction by regression models could be simple and fairly accurate. Thus, it is anticipated that the empirical approach will be useful and reliable tool for many purposes: retrofit savings analysis by estimating energy usage in an existing building or the diagnosis of the building operational problems with real time analysis.

• Journal of Industrial Technology
• /
• v.31 no.A
• /
• pp.11-19
• /
• 2011

A new PCD (Pitch Circle Diameter) adjustment system has been designed in this study. Traditional system requires repetitive same works in changing automobile tires. The system proposed in this study requires just one simultaneous work to finish the job. We designed the system using Solidworks CAD software. We further investigate the jobs for both cases through work factor method. Based on careful clarification of the job, work factor units were assigned to each work factor. Even if further analysis should be processed for actual field application, the mechanism proposed in this study may provide good reference for practical usage.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.2
• /
• pp.217-237
• /
• 1995

One of the most distinguished advantages of five-axis machining is that complex free surfaces(such as impeller) can be machined by one setup. Five-axis CNC machine, however, is very expensive so that its usage is restricted to a few large companies. As an economical approach to five-axis machining, this paper presents a method for machining the five-axis free surfaces(using ball-end mill) on a three-axis CNC machine with an index table. The method developed consists of: a) determining the minimum number of part setups and their interference-free and collision-free potential machining area, b) calculating actual machining area for each setup, and c) generating 3-axis cutter path for each part setup. The method has been successfully tested via computer simulations for several complex surfaces including impeller.

• Journal of the Korean Institute of Rural Architecture
• /
• v.6 no.3
• /
• pp.39-48
• /
• 2004

The purpose of this study is to clarify the actual conditions of the plan composition of expressway service facilities. This study investigated the characteristics of both indoor space and outdoor space of 15 service facilities, and then analyzed attributes of users by the plan type along with their perception on the facility usage. The results of this study are summarized as follows; 1) When analyzing the attributes of expressway service facilities users, 36% respondents said that they used the expressway service facilities just to rest. The average distance of using the service plaza was found to be approximately 67km. 2) In terms of the indoor space of the expressway service facilities, as basic patterns, B(R+C+T)-type(53%), A(C+R+T)-type(40%), C(C+T+R)-type(7%) were found in order, all the service facilities need to expand them.