• 지질공학
• /
• 제19권4호
• /
• pp.441-457
• /
• 2009

본 연구는 국내 외의 사질지반에 시공된 타입말뚝에 대해 파괴가 현저하게 나타날 때까지 재하한 정재하시험 실측값을 이용하여 극한하중 항복하중 침하량기준의 각각 판정법으로 극한하중을 추정하였다. 추정된 극한하중을 실측된 파괴하중으로 정규화하고 말뚝특성에 따라 판정법별 비교 분석 하였다. 또한 극한하중 추정시 적합한 판정법을 검토하고 허용하중 결정시 안전율을 재평가하여 다음과 같은 결론을 얻었다. 극한하중 판정법으로 구한 극한하중은 Chin 방법에 의해 해석된 값이 실측값 보다 과대평가하는 경향을 나타냈으며 B. Hansen 80%기준과 Stability Plot 방법이 실측치와 거의 일치하여 가장 신뢰성이 있는 방법으로 판단되었다. 허용하중 산정시 극한하중 판정법에 의해 구한 파괴하중에 적용해야 할 안전율을 구조물기초설계기준에 적용된 안전율을 기준으로 환산하면 B. Hansen 90% 방법을 제외하고 3.0보다 큰 값이 적용되어야 할 것으로 판단되었으며 항복하중 판정법들의 경우 기준안전율 2.0보다 큰 값이 적용되어야 할 것으로 판단되었다. 침하량 기준에 의해 구한 하중에 적용해야 할 안전율을 극한하중에 대한 안전율 3.0을 기준으로 환산해 보면, 전침하량 기준 및 순침하량 기준은 3.0보다 작은 값이 적용되어야 할 것으로 판단되었다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.919-924
• /
• 2008

Power consumption in the building thermal load could be the sum of the building fabric conduction load, building ventilation convection load and other such as radiation loss load. Dynamic Breathing Building (DBB) is the state-of-the-art to improve the wall insulation and indoor air quality(IAQ) performance as making air flow through the wall. This heat recovery type DBB contributes the power consumption saving due to the improved dynamic U-value. KIER twin test cell with static insulation(SI) and dynamic insulation(DI) at KIER was developed to test building power consumption at the real outside conditions. Then, the actual results were compared with the theory to predict the power consumption at the KIER twin test cell and introduced the building new radiation loss factor $\alpha$ to explain the difference between the both the theory and the actual case. As the results, the power consumption at the breathing DI wall building could saved 10.8% at the 2ACH(Air change per hour) compared with conventional insulation. The building radiation loss factor $\alpha$ for this test condition to calibrate the actual test was 0.55 in the test condition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.235-237
• /
• 1996

This paper shows a reasonable power demand method and load characteristics in underground streets, that was made by the systematic and statistical way considering actual conditions, such as investigated electric equipment capacity, electric power consumption, load characteristics, etc for 13 underground streets.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권5호
• /
• pp.37-40
• /
• 1995

In this paper, we investigate the daily load curve and yearly lighting hours of general and industrial Korean lighting apparatus. The daily load curve of lighting apparatus shows the peak use at 8 p.m. in general and 10 a.m. in industrial building. The yearly lighting hours are 2,948 hours in general and 4,066 hors in industrial building.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.363-365
• /
• 2002

The characteristic responds of load respect to various disturbances which can usually be occurred on actual power system is very important to analyze performance and to improve load with high-technology. The disturbance power supply is designed to provide wide range of power to testing load. This device uses PLC technology to dynamic characteristic experiment and CVVF to change frequency. Also this instrument includes data acquisition system to obtain reliable data from experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.247-249
• /
• 1997

This paper shows a load characteristics for hospital, hotel and department, that was made by the systematic and statistical way considering actual conditions, such as investigated electric equipment capacity, electric power consumption, load characteristics, etc for 58 buildings.

• Journal of the Korean Wood Science and Technology
• /
• 제45권6호
• /
• pp.728-736
• /
• 2017

In this study, the bending behavior of cross-laminated timber (CLT) connected by nails were investigated. Especially, the load-carrying capacity of the nail-jointed CLT under out-of-plane bending was predicted by the lateral resistance of the used nails. Three-layer nail-jointed CLT specimens and a nail connection were manufactured by 30 mm (thickness) ${\times}$ 100 mm (width) domestic species (Pinus koraiensis) laminas and Ø$3.15{\times}82mm$ nails using a nail-gun. Shear test for evaluating the nail lateral resistance and bending test for evaluating the load-carrying capacity of the nail-jointed CLT under out-of-plane bending were carried out. As a result, two lateral resistance of the used nail, the 5% fastener offset value and the maximum value, were 913 N and 1,534 N, respectively. The predicted load-carrying capacity of the nail-jointed CLT by the 5% offset nail lateral resistance was similar to the yield points on the actual load-displacement curve of the nail-jointed CLT specimens. Meanwhile, the nail-jointed CLT specimens were not failed until the tension failure of the bottom laminas occurred beyond the maximum lateral resistance of the nails. Thus, the measured maximum load carrying capacities of the nail-jointed CLT specimens, approximately 12,865 N, were higher than the predicted values, 7,986 N, by the maximum nail lateral resistance. This indicates that the predicted load-carrying capacity can be used for designing a structural unit such as floor, wall and roof able to support vertical loads in a viewpoint of predicting the actual capacities more safely.

• 전기학회논문지P
• /
• 제62권2호
• /
• pp.65-71
• /
• 2013

Nonlinear loads with harmonics exist in an actual power system where harmonic currents make voltage distortion. The sum of reactive power measured at individual load is different from the measured reactive power at a bus in a power system with linear and non-linear loads. In this study, ANN(artificial neural network) load modeling technique with consideration of harmonics is introduced for more accurate component load modeling and an impact coefficient is proposed for aggregation of component loads. Results of this research show more accurate load modeling method. Since precise data for power system analysis can be acquired, the proposed method will be used for power system planning and maintenance.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 가을 학술발표회 논문집
• /
• pp.25-28
• /
• 1989

Live load data in domestic office buildings have been collected in a systematic manner. Based on surveyed data, equivalent uniformly distributed load intensities, which produce the same load effect as the actual spatially varying live load, have been obtained for various structural members(such as slab, beam, column, etc.). Influence surface method has been employed to compute load effects under real live load, inclucing beam moment, slab moment as well as axial force and moments in column. The results have been examined to find probabilistic characteristics and relationship between influence area and load intensity(or coefficient of variation). The results were also compared with other survey results and found to be reasonable.

• Journal of Electrical Engineering and Technology
• /
• 제3권4호
• /
• pp.451-459
• /
• 2008

Accurate load modeling is essential for power system static and dynamic analysis. By the nature of the problem of parameter estimation for power system load modeling using actual measurements, multiple local optimal solutions may exist and local methods can be trapped in a local optimal solution giving possibly poor performance. In this paper, Trust-Tech, a novel methodology for global optimization, is applied to tackle the multiple local optimal solutions issue in measurement-based power system load modeling. Multiple sets of parameter values of a composite load model are obtained using Trust-Tech in a deterministic manner. Numerical studies indicate that Trust-Tech along with conventional local methods can be successfully applied to power system load model parameter estimation in measurement-based approaches.