• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.3
• /
• pp.31-38
• /
• 2014

Four actual cultivations were prepared and a variety of soybean was cultivated. A H-flume, an automatic water level gauge and an automatic water sampler were installed at the outlet of each plot equipped for the measurement of flow rate and its water quality. The amount of rainfall of the study area in 2013 was measured as 975.6 mm which was much lower than the annual average rainfall of 1,271.8 mm, resulting in less occurrences in rainfall-runoff events. Rainfall-runoff events were occurred three times during the rainfall event of 4~5 July, 23 and 24 August. The characteristics of NPS pollution discharge of the plots and the reduction effect of the selected BMPs were analyzed during these events. The reduction effect of straw mat and soil amendments (Polyacrylamide (PAM) and Gypsum) on runoff ratio ranged between 38.2 and 92.9% (average 71.6%). The NPS pollution load reduced between 27.7 and 95.1% (average 70.0%) by the application of rice straw mat and soil conditioner when compared with that of control plot. Soybean yield (2,133.3 kg/ha) of the straw mat covered plots increased by 14.3% when compared with control (1,866.7 kg/ha). The effect of straw mat on the yield was not economically viable if the material and accompanying labor costs were considered. The data collected and analyzed on different soil textures and crops in this study are expected to be a fundamental reference for the expansion of the results to the application nationwide and the development of NPS pollution management policies.

• Journal of Advanced Marine Engineering and Technology
• /
• v.12 no.2
• /
• pp.21-34
• /
• 1988

Machinery enclosures are widely adopted to reduce the noise emission in various fields of application. Emitted noise, which is due to the vibration of enclosure's outer surface, is composed of two kinds of sound with different path of propagation. One is the "structure-borne sound", while the other is "air-borne sound". In order to get a most efficient machinery enclouser a prudent consideration upon the above structure-borne and air-borne sound is required, as the guiding principle of contermeasure for each noise is quite different. The controlling of input vibration and its isolation are major subjects for the structure-borne sound, and the specifications of absorbing members and damping panels are the major related matters for the air-borne sound. Hence, it seems very efficient to separate the total sounds into two categories with a great accuracy when one think of further reduction of noise from the existing enclosure, although its separating methods have not been made clear for many years. Author proposes an application method of experimental modal analysis to extract the structure-borne sound from the measured total radiation sound, as the air-borne sound is deduced by the vectorial difference between the measured total radiation sound and the calculated structure-borne sound. In order to calculate the correct structure-borne sound by the excitation at an arbitrary point on the enclosure structure, it is important to decide 1) how to estimate the enclosure's surface vibration velocity and 2) how to compute the radiation sound which is considered as the effect of vibration modes of enclosure surface. The former can be solved with total frequency response function calculated by the application of experimental modal analysis. The latter is to be solved by the author's new approaches for radiation sound computation by means of the Rayleigh's integral equation and the boundary-element method applied complex surface vibration velocity. As a first step, structure-borne sound by the excitation at an arbitry point on the rectangular plate with fixed edges, has been calculated to verified the reliability of the developed computation methods. The results of calculation show good agreements with those of the actual measurements.actual measurements.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.669-672
• /
• 2007

Recently, the government has established the synthesis measures of RFID/USN application, plans to facilitate 16 most priority fields as a leading business, and has kept making efforts to spread the application by making RFID attachment mandatory on harbor and distribution industry. In spite of these efforts, it is necessary to analyze actual state of each industry and institution demanding RFID/USN to lead it to induce them. This study tries to draw the method of spreading RFID/USN usage by analyzing and verifying the actual situation of their application and its problems, and to figure out how to improve the problems in each sector on the basis of the analysis by comparing and analyzing the obstacles in their wide usage.

• Journal of Korean Elementary Science Education
• /
• v.24 no.2
• /
• pp.174-182
• /
• 2005

The purpose of this study was to analyze the professionalism of elementary school teachers and to draw out factors which elementary teachers should try to improve their professionalism for environmental education. For the study, both Quantitative analysis and qualitative methodologies were applied: First, randomly selected 483 elementary teachers from Seoul and Gyeonggi self responded to 5 evaluation areas by Hungerford et al. (1994) to evaluate their environmental education professionalism through the use of five point Likert scale. Second, 2 elementary teachers' environmental classes were observed for the purpose of analyzing strengths and weaknesses in classroom instruction, and then the results of self-evaluation on environmental education professionalism and teacher professionalism as shown in the classes were compared. It was found that 483 elementary teachers including 2 teachers fer analyzing classroom instruction who performed a self-evaluation gave themselves mid-scores on the Hungerford et al.'s 5 evaluation areas. However, the result of self-evaluation did not correspond with the result of actual class observation and teacher interview. That is, the actual environmental classes conducted by 2 teachers did not seemed to reflect the evaluation areas which were the foundation of the study: the conceptual awareness, the investigation & evaluation, environmental action skills, and educational application. The results of this study can be used as the basis reference to develop teaching-learning program and in-service programs for professional development of teachers for successful application of environmental education in elementary school classes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.313-315
• /
• 2017

Recently, application fields using machine learning have been widely expanded. In addition to the spread of smart devices, application services using location-based services are also in demand. However, it is difficult to provide the application service through the positioning in the indoor environment such as the specific space where the disaster situation where the information for positioning can not be collected and the actual location location information can not be used. In this situation, using the spatial information composed of the marker information and the markers of the neighbor registered in the augmented reality environment, positioning at a specific situation or position becomes possible. At this time, it is possible to learn the operation that makes the configuration of the marker-based spatial information correspond to the actual position through the machine learning, and the optimal positioning result can be obtained by minimizing the error. In this paper, we study the positioning methods required in specific situations using machine learning for learning of augmented reality markers and spatial information.

• The Mathematical Education
• /
• v.40 no.2
• /
• pp.179-194
• /
• 2001

The seventh curriculum put into operation gradually from first-year student in 2000 academic years of elementary school is subject to form and apply a step-wise level curriculum. Mathematics(correspond to junior high school course from 7th school year to 9th school year) should apply a step-wise level curriculum from 7th school year in 2001 academic years. Accordingly, mathematics teachers must diagnose actual conditions of educations, distribution tables of test results, step-wise teaching-studying programs etc. They also make proper plans suitable for actual situations of each school, prepare appropriate teaching materials and aids. I investigated preceding studies planned for preparation of putting into operation of a step-wise level curriculum. It showed that most of the studies were conducted at schools of medium or large scale and studies conducted at schools of small scale was rare. There were 113 small scale middle schools out of total 297 middle schools in Kyongsangbuk-do area in 2000. In this situation, I felt necessities of modeling of a step-wise level curriculum suitable for small scale schools. In this study, I modeled a step-wise level curriculum suitable for small scale middle schools, applied this model to 44 students in M middle school. I modeled two types of curriculum. One is a step-wise level curriculum that execute special supplementation process to students who do not complete 7-가 step successfully. The other is a step-wise level curriculum which is a regular model for a step-wise level of 7-나 step. I carried out an academic achievement test and intimacy test about mathematics before and after the application of the model. In this study, I found out that this model was very effective in academic achievement of students and helpful to declined students in scholarship. In the intimacy test, It was found out that most of the students gained confidence in mathematics, felt less anxiety, formed positive self consciousness. Therefore, I think that this model will be helpful to the application of the seventh step-wise level curriculum.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.1
• /
• pp.41-49
• /
• 2022

Recently interests on the application of thermal cameras have increased with the advance of image analysis technology. Aside from a simple image acquisition, applications such as digital twin and thermal image management systems have gained popularity. To this end, we studied the effect of emissivity on the DN (Digital Number) value in the process of derivation of a relational expression for converting DN to an actual surface temperature. The DN value is a number representing the spectral band value of the thermal image, and is an important element constituting the thermal image data. However, the DN value is not a temperature value indicating the actual surface temperature, but a brightness value indicating high and low heat as brightness, and has a non-linear relationship with the actual surface temperature. The reliable relationship between DN and the actual surface temperature is critical for a thermal image processing. We tested the relationship between the actual surface temperature and the DN value of the thermal image, and then the radiation adjustment was performed to better estimate actual surface temperatures. As a result, the relation graph between the actual surface temperature and the DN value similarly show linear pattern with the relation graph between the radiation-controlled non-contact thermometer and the DN value. And the non-contact temperature after adjusting the emissivity was closer to the actual surface temperature than before adjusting the emissivity.

• Korean Journal of Remote Sensing
• /
• v.28 no.3
• /
• pp.337-346
• /
• 2012

In the view from most application system developers and users, cloud computing becomes popular in recent years and is still evolving. But in fact it is not easy to reach at the level of actual operations. Despite, it is known that the cloud in the practical stage provides a new pattern for deploying a geo-spatial application. However, domestically geo-spatial application implementation and operation based on this concept or scheme is on the beginning stage. It is the motivation of this works. Although this study is an introductory level, a simple and practical processed result was presented. This study was carried out on Amazon web services platform, as infrastructure as a service in the geo-spatial areas. Under this environment, cloud instance, a web and mobile system being previously implemented in the multi-layered structure for geo-spatial open sources of database and application server, was generated. Judging from this example, it is highly possible that cloud services with the functions of geo-processing service and large volume data handling are the crucial point, leading a new business model for civilian remote sensing application and geo-spatial enterprise industry. The further works to extend geo-spatial applications in cloud computing paradigm are left.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.586-589
• /
• 2006

High resolution satellite imagery is regarded as one of the important data sets to engineering application, as well as conventional scientific application. However, despite this general view, there are a few target applications using this information. In this study, the possibility for the future wide uses in associated with smart graphics of this information is investigated. The concept of smart graphics can be termed intelligent graphics with XML-based structure and knowledge related to semantic web, which is a useful component for the data dissemination framework model in a multi-layered web-based application. In the first step in this study, high resolution imagery is transformed to GML (Geographic Markup Language)-based structure with attribute schema and geo-references. In the second, this information is linked with GIS data sets, and this fused data set is represented in the X3D (eXtensible 3D), ISO-based web 3D graphic standard, with styling attributes, in the next stop. The main advantages of this approach using GML and X3D are the flourished representations of a source data according to user/clients’ needs and structured 3D visualization linked with other XML-based application. As for the demonstration of this scheme, 3D urban modelling case with actual data sets is presented.

• Convergence Security Journal
• /
• v.15 no.1
• /
• pp.3-9
• /
• 2015

In this paper, a detection technique of smishing using a TaintDroid is suggested. Suggesting system detects malicious acts by transmitting a URL to the TaintDroid server and installing a relevant application to a virtual device of the TaintDroid server, when a smartphone user receives a text message including the URL suspected as a smishing. Through this we want to distinguish an application that can not install because of suspicion of a smishing in an actual smartphone whether said application is malicious application or not by testing with the virtual device of said system. The detection technique of a smishing using the TaintDroid suggested in this paper is possible to detect in a new form a smishing with a text message and to identifying which application it is through analysis of results from a user.