• 헤리티지:역사와 과학
• /
• 제51권4호
• /
• pp.4-23
• /
• 2018

서병오(徐丙五, 1862-1936)는 서구적 '미술' 개념의 도입으로 일본화 내지 서양화로 기울던 일제강점기 시서화일치의 대구 문인화단이 형성되는데 중추적인 역할을 하였다. 그는 1879년 이하응(李昰應, 1820-1898)과의 만남을 계기로 서화계에 입문하였으나, 문인화가로 본격적인 활동을 시작한 것은 1910년 경술국치 이후부터이다. 그의 예술세계는 세 시기로 구분되며, 학습기인 1879년부터 1897년까지는 관직 진출을 목표로 하였던 때문인지 중국 화보를 임모하거나 이하응의 영향 아래 사군자화를 여가에 그리는 정도였다. 발전기는 1898년부터 1920년까지로 그는 애국계몽운동 등 사회적 지도자로 활동하다 1910년 경술국치 이후 삶의 방향을 문인화가로 전환하였다. 그리고 두 번째 중국 여행에서 다시 만난 민영익(閔泳翊, 1860-1914)의 운미란과 포화(蒲華, 1830-1911)의 묵죽법을 근간으로 새로운 화풍을 적극 모색함과 동시에 산수, 화훼, 기명절지 등의 화목도 다루었다. 완숙기인 1921년부터 1936년까지는 대구와 한양을 오가며 근대 한국 화단의 서화가로 왕성하게 활동하였으며, 묵란과 묵죽에서 윤묵의 호방한 필법을 특징으로 하는 개성적 화풍을 완성하였다. 특히 학습기의 경우 관련 기록이나 현전작품이 드물어 서병오의 창작활동이나 화풍 등에 관한 것은 추론의 수준을 벗어나지 못하고 있다. 이와 관련해 본고에서 집중적으로 분석한 서병오의 1889년작 난석죽도 11점은 학습기의 화풍 연원이나 수준을 가늠할 수 있는 중요한 단서라는 점에서 주목된다. 1889년작 난죽석도 가운데 묵란도는, 이하응이 1882년 7월 청군에 의해 체포되기 이전에 그린 초기 군란도와 석란도에서 영향 받았다는 사실을 확인하였다. 묵죽도는 한양에 널리 알려진 양주화파 정섭(鄭燮, 1693-1765)과 김정희의 제자 허련(許鍊, 1809-1892)의 화법을 수용했을 뿐만 아니라 이하응의 석란도 형식을 응용하여 변화를 시도했던 것으로 보인다. 괴석도의 경우 직접적인 관련성은 찾지 못하였으나, 19세기 후반 청나라의 괴석화가 주당(周棠, 1806-1876)과 여항화가 정학교(丁學敎, 1832-1914) 등에게 영향을 받았던 것으로 판단된다. 결론적으로 서병오의 1889년작 난죽석도는 학습기에 그려진 것으로 운현궁을 찾았던 허련과 정학교 같은 동시기 화가들이나, 한양에 작품이 유입되었던 정섭과 주당 등의 중국 작품을 실견하며 이들의 화풍을 수용하였다는 사실을 알려준다.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제62권3호
• /
• pp.381-400
• /
• 2023

인공지능과 빅데이터를 활용하여 실세계의 다양하고 복잡한 문제를 해결해야 하는 시대가 도래함에 따라 수학적 접근을 통하여 실제적인 문제를 해결할 수 있는 문제해결역량이 요구되고 있다. 실제 2015 개정 수학과 교육과정과 2022개정 수학과 교육과정은 수학적 모델링을 실세계의 문제를 해결하는 활동과 역량으로써 강조하고 있다. 하지만 국내외 교과서에 제시되는 실세계 문제는 실제 상황에서 거의 일어나지 않은 인위적인 문제의 비율이 높은 실정이다. 이에 따라 국내외에서는 수학적 모델링 과제의 특징 중 현실성에 주목하며 학생들의 일상을 반영하고 있는 진정성 있는 과제의 필요성을 제안하고 있다. 하지만 기존의 연구들은 현실성에 대한 이론적인 제안에 초점이 맞춰져 있으며, 현실성에 대한 교사의 인식과 현실성을 과제에 반영하는 교사의 역량을 분석한 연구는 미흡하다. 이에 따라 본 연구는 수학적 모델링을 위한 과제의 특징 중 현실성에 대한 현직 수학 교사의 인식과 현실성을 과제에 반영하는 과제 개발 역량을 분석하는 데에 목적을 두었다. 먼저 이를 위해 선행연구를 분석하여 현실성을 위한 5가지 조건을 정립하였다. 이후 수학적 모델링을 주제로 교사 직무 연수를 시행하였으며, 이에 참여한 교사 41명을 대상으로 사전-사후 조사를 실시하였다. 이때 사전-사후 조사에서는 현실성이 반영되지 않은 과제를 제시하였으며, 주어진 과제가 현실성을 반영하고 있는지를 판단하고, 그 판단의 근거를 현실성을 위한 5가지 조건 중에 선택할 수 있도록 하였다. 이후 사전-사후 조사에서 현직 수학 교사들이 선택한 객관식 선택지를 코딩하여 빈도분석을 시행하였으며, 사전-사후로 빈도를 비교하여 현직 수학 교사들의 현실성에 대한 인식변화를 확인하였다. 또한 현직 수학 교사들이 제작한 수학적 모델링 과제를 현실성의 관점에서 평가하여 교사들의 과제 개발 역량을 확인하였다. 그 결과, 현직 수학 교사들이 과제에 대한 현실성을 판단할 때, '수학 밖의 실생활 소재를 사용' 이라는 현실성에 대한 단편적인 조건만을 고려하는 미흡한 인식에서 현실성의 5가지 조건을 다각도로 고려하는 인식으로 변화됨을 보여주었다. 특별히 사전-사후 조사에서 현실성에 대한 판단이 뒤바뀐 현직 수학 교사들을 중심으로 판단의 근거들을 확인한 결과, 현실성을 위한 5가지 조건들 중에 특정 조건을 사전 조사에서는 현실성의 기준으로 고려하지 않았다가 사후 조사에서는 현실성의 기준으로 고려하게 된 현직 수학 교사들의 인식의 변화를 확인할 수 있었다. 더불어, 현직 수학 교사들이 수학적 모델링을 위해 개발한 과제를 평가한 결과, 현직 수학 교사들은 현실성을 수학적 모델링 과제에 반영하는 역량을 보였다. 다만 현실성의 5가지 조건 중 '학생들의 일상에서 일어날 수 있는 상황', '문제 해결의 필요성', '실세계 현상으로서의 결론 요구'에 대해서는 상대적으로 낮은 반영 비율을 보였다. 또한 사후 조사에서 과제의 현실성에 대해 올바른 판단을 할 수 있었던 교사 집단보다 올바른 판단을 할 수 없었던 교사 집단에서 과제 개발 역량이 낮은 교사들의 비율이 좀 더 많이 나타났다. 이러한 연구 결과를 바탕으로 본 연구는 수학 교사들이 수학적 모델링을 수업에 활용할 수 있도록 하기 위한 교사 교육의 방향성을 제안하였다.

• 벤처창업연구
• /
• 제19권1호
• /
• pp.75-91
• /
• 2024

본 연구는 최근 전쟁과 기후변화, 지정학적 불안이 고조되는 가운데 기술혁신의 가속화 등으로 글로벌 경영환경의 급변하고 있다. 이에 따라 산업생태계의 변동성, 복잡성, 모호성, 불확실성이 지속적 확장으로 미래에 대한 예측이나 계획이 어려워지고 있다. 이에 따라 조직은 생존전략에 의해 한계사업정리, 해고 등 불가피한 구조조정을 진행하고 있다. 이에 따라 직장인들은 의도치 않게 직장을 잃을 수 있다는 불안요인이 높아지는 가운데 지속적 경제활동을 위한 대안으로 창업을 모색하고 있다. 창업으로 전환하는 과정에서 직장인의 자기결정성이 어떠한 경로를 통해 영향을 미치는지 검증하고자 하였다. 본 연구를 위해 온라인 설문조사로 310명의 유효 data를 기반으로 SPSS와 AMOS 통계패키지를 활용하였다. 결과를 요약하면, 첫째, 직장인의 자기결정성은 창업의지에 유의한 영향을 미치지 못했다. 다만 자기결성성이 혁신성과 창업지원정책인식에 정(+)의 영향관계를 확인하였다. 이 결과는 창업에 바로 도전하기보다는 장기적인 인생경로 관점에서 혁신적인 경험을 축적하고 창업지원정책인식도를 높여서 단계적으로 준비하려는 심리가 작동된 것을 판단된다. 둘째, 혁신성이 창업의지에 정(+)의 영향을 확인하였다. 또한 창업지원정책인식이 창업의지에 정(+)의 영향을 확인하였다. 이는 정부의 다양한 창업지원정책인식은 창업을 고려할 때 체감도가 높다는 인식이 반영된 것으로 판단된다. 셋째, 혁신성이 창업지원정책인식에 정(+)의 영향을 확인하였다. 이는 예비창업자들이 혁신성을 발현하여 새로운 아이디어의 실현을 위해서는 창업지원정책인식의 실효성이 반영된 것으로 판단된다. 넷째, 혁신성과 창업지원정책인식은 자기결성정과 창업의지 간의 관계를 매개하였고, 창업지원정책인식은 혁신성과 창업의지 간의 관계를 매개하는 것을 확인하여 창업의지에 중요한 요소임을 확인하였다. 창업관련 선행연구에서 학생들을 대상으로 주류를 이루고 있지만, 경제활동의 비중이 높은 직장인을 대상으로 한 연구대상의 차별성과 연구범위 확대 측면에서 학문적 가치가 있고, 자기결정정성의 동기만으로는 창업의지를 자극되지 않는다는 점과 혁신성과 창업지원정책의 완전매개효과 측면을 고려할 때 정부의 인적, 물적 지원정책 등의 실무적 측면에서 시사하는 바가 크다. 본 연구에서 표본의 선정 및 분석과정에서 동일방법편의 문제가 완전히 해소되지 않은 한계성과 창업의지가 형성되어 창업행동으로 전환되는지에 대한 추가적인 확정연구의 필요성이 있다. 선행연구에서 다소 부족했던 인간심리 동기와 창업 간의 관련성을 다룬 학문적 및 실무적 측면에서 직장인의 창업 전환은 개인의 경제적 안정과 국가적으로 일자리 창출의 기대효과가 예상되며 지속적인 연구의 필요성과 가치성이 있다고 판단된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 지능정보연구
• /
• 제23권3호
• /
• pp.155-175
• /
• 2017

최근 독감 예측이나 당선인 예측, 구매 패턴, 투자 등 다방면에서 웹검색 트래픽 정보. 소셜 네트워크 내용 등 거대한 데이터를 통해 사회적 현상, 소비 패턴을 분석하는 시도가 이전보다 늘어났다. 구글, 네이버, 바이두 등 인터넷 포털 업체들의 웹검색 트래픽 정보 공개 서비스와 함께 웹검색 트래픽 정보를 활용하여 소비자나 사용자와 관련된 연구가 실시되기 시작했다. 웹검색 트래픽 정보를 활용한 사회 현상, 소비 패턴 분석을 연구는 많이 수행되었으나, 그에 비해서 도출된 여행 수요 모델을 토대로 의사결정을 위한 실질적 대책 수립으로 이어지는 연구는 많이 진행되지 않은 실정이다. 관광산업은 상대적으로 많은 고용을 가능하게 하고 외자를 유치하는 등 고부가가치를 창출하여 경제 전체에 선순환 효과를 일으키는 중요한 산업이다. 그 중에서도 국내 입국외래객중 수년간 2위와의 큰 차이로 1위를 차지해왔던 중국 국적의 관광객 '유커' 및 그들이 지출하는 1인당 평균 관광 수지는 한국 경제에 매우 중요한 한 부분이다. 관광 수요의 예측은 효율적인 자원 배분과 합리적인 의사 결정에 있어서 공공부문 및 민간부문 모두 중요하다. 적절한 관광 수요 예측을 통해서 한정된 자원을 더욱 효과적으로 활용하여 더욱 많은 부가가치를 창출하기 위한 것이다. 본 연구는 중국인 인바운드를 예측하는 방법에 있어, 이전보다 더 최신의 트렌드를 즉각적으로 반영하고 개인들의 집합의 관심도가 포함되어 예측 성능이 개선된 방법을 제안한다. 해외여행은 고관여 소비이기 때문에 잠재적 여행객들이 입국하기 전 웹검색을 통해 적극적으로 자신의 여정과 관련된 정보를 취득하기 위한 활동을 한다. 따라서 웹검색 트래픽 수치가 중국인 여행객의 관심정도를 대표할 수 있다고 보았다. 중국인 여행객들이 한국 여행을 준비하는 단계에서 검색할만한 키워드를 선정해 실제 중국인 입국자 수와 상관관계가 있음을 검증하고자 하였다. 중국 웹검색 엔진 시장에서 80%의 점유율을 가지는 중국 최대 웹검색 엔진 '바이두'에서 공개한 웹검색 데이터를 활용하여 그 관심 정도를 대표할 수 있을 것이라 추정했다. 수집에 필요한 키워드의 선정 단계에서는 잠재적 여행객이 여정을 계획하고 구체화하는 단계에서 일반적으로 검색하게 되는 키워드 후보군을 선정하였다. 키워드의 선정에는 중국 국적의 잠재적 여행객 표본과의 인터뷰를 거쳤다. 트래픽 대소 관계 확인 결과에 따라서 최종 선정된 키워드들을 한국여행이라는 주제와 직접적인 연관을 가지는 키워드부터, 간접적인 연관을 가지는 키워드까지 총 세 가지 레벨의 카테고리로 분류하였다. 분류된 카테고리 내의 키워드들은 바이두'가 제공하는 웹검색 트래픽 데이터 제공 서비스 '바이두 인덱스'를 통해 웹검색 트래픽 데이터를 수집했다. 공개된 데이터 페이지 특성을 고려한 웹 크롤러를 직접 설계하여 웹검색 트래픽 데이터를 수집하였고, 분리되어 수집된 변수에는 필요한 변수 변환 과정을 수행했다. 자동화 수집된 웹검색 트래픽 정보들을 투입하여 중국 여행 인바운드에 대한 유의한 영향 관계를 확인하여 중국인 여행객의 한국 인바운드 여행 수요를 예측하는 모형을 개발하고자 하였다. 정책 의사결정 및 관광 경영 의사결정 같은 실무적 활용을 고려하여 각 변수의 영향력을 정량적으로 설명할 수 있고 설득이 명료한 방법인 다중회귀분석방법을 적용해 선형 식을 도출하였다. 수집된 웹검색 트래픽 데이터를 기존 검증된 모형 독립변인들에 추가적으로 투입함으로써 전통적인 독립변인으로만 구성된 연구 모형과 비교하여 가장 뛰어난 성능을 보이는 모형을 확인하였다. 본 연구에서 검증하려는, 웹검색 트래픽으로 대표되는 독립변인을 투입한 최종 도출된 모형을 통해 중국인 관광 수요를 예측할 때 유의한 영향을 끼치는 웹검색 트래픽 변수를 확인할 수 있다. 최적 모형 설명력을 가지는 모형을 기반으로 최종 회귀 식을 만들었고 이를 '유커마이닝' 시스템 내부에 도입하였다. 데이터 분석에서 더 나아가 도출된 모형을 직관적으로 시각화하고, 웹검색 트래픽 정보를 활용하여 도출할 수 있는 인사이트를 함께 보여주는 데이터 분석 기반의 '유커마이닝' 솔루션의 시스템 알고리즘과 UX를 제안하였다. 본 연구가 제안하는 모형과 시스템은 관광수요 예측모형 분야에서 웹검색 트래픽 데이터라는 정보 탐색을 하는 과정에 놓인 개인들의 인터랙티브하고 즉각적인 변수를 활용한 새로운 시도이다. 실무적으로 관련 정책결정자나 관광사, 항공사 등이 활용 가능한 실제적인 가치를 가지고, 정책적으로도 효과적인 관광 정책 수립에 활용될 수 있다.

• Applied Biological Chemistry
• /
• 제17권1호
• /
• pp.1-30
• /
• 1974

수도저위(水稻低位) 생산력(生産力)의 원인구명(原因究明)에 관(關)한 영양생리학적연구(營養生理적硏究)로 여러 가지 생육조건하(生育條件下)에서 품종별(品種別) 양분흡수(養分吸收) 및 동화기능(同化機能)과 양분(養分)의 체내(體內)에서의 이행양상(移行樣相)을 추구(追究)하는 한편 고수량지(高收量地) 벼와 저수량지(低收量地) 벼에 대(對)한 생육시기별(生育時期別)로 양분(養分)의 흡수(吸收) 체내무기양분(體內無機養分)과 수량(收量) 및 수량구성요소(收量構成要素)와의 관계(關係) 등(等)을 추구(追究)하여 저수량지(低收量地) 벼의 영양생리적(營養生理的) 저수요인(低收要因)을 밝히고저 본연구(本硏究)를 수행(遂行)하였던 바 그 결과(結果)를 요약(要約)하면 다음과같다. 1. 양분(養分)의 흡수력(吸收力)은 품종(品種)에 따라 차이(差異)가 있으며 인산(燐酸) 및 가리(加里)의 흡수력(吸收力)이 강(强)한 품종(品種)은 구사부에, 진흥(振興)이며 낮은 품종(品種)은 팔달(八達)이었다. 2. 근(根)의 ${\alpha}-naphthylamine$의 산화력(酸化力)과 인산(燐酸)의 흡수력(吸收力)과는 유의적(有意的)인 상관관계(相關關係)가 있으며 산화력(酸化力)이 높으면 인산(燐酸)의 흡수(吸收)가 증대(增大)되었바. 3, 탄소동화력( 炭素同化力)은 품종(品種)에 따라 차이(差異)가 있으며 노인도(老人稻), 구대내조욱(九大耐潮組) 3호(號), 수원(水原)82호(號), 진흥(振興) 등은 강(强)하고 대구조(大脚租), 관옥(關玉), 육우(陸羽) 132호(號)가 약(弱)하였다. 4, 질소(窒素)의 증시(增施)는 소비(少肥)에 비(比)하여 동화량(同化量)은 증가(增加) 되나 등화산물(同化産物)의 이삭으로의 이전(移轉)은 적었다5. 정상(正常) 생육(生育)한 벼에 비(比)하여 인산(燐酸), 가리(加里) 및 마그네슘이 결핍(缺達)된 벼는 전탄소동화량이(全炭素同化量)이 정상(正常) 벼 100에 비(比)하여 40이하(以下)로 현저(顯著)히 낮으며 그 순서(順序)는 Mg>P>K이고, 동화물(同化物)의 이전(移轉)에 장해(障害)가 큰 것은 K>Mg>P의 순(順)이었다. 6. 고수량지(高收量地) 벼는 저수량지(低收量地) 벼에 비(比)하여 총건물(總乾物) 생산량(生産量)이 현저(顯著)하게 많고 특(特)히 유수형성기(幼穗形成期) 이후(以後)에 증가량(增加量)이 더욱 현저(顯著)하였다. 7. 고수량지(高收量地) 벼는 출수기(出穗期)에 옆면적(葉面積)이 최고(最高)에 달(達)하였다가 그 이후(以後) 완만(緩慢)하게 줄어지나 저수량지(低收量地) 벼는 출수이전(出穗以前)에 엽면적(葉面積)이 최고(最高)에 달(達)하였다가 출수이후(出穗以後)에 급격(急激)히 감소(減少)되며 그 원인(原因)은 하엽(下葉)의 조기고사(早期枯死)에 기인(起因)되었다. 8. 고수량지(高收量地) 벼는 저수량지(低收量地) 벼에 비(比)하여 생육초기(生育初期)에는 투과광율(透過光率)이 높고 생육후기(生育後期)에 낮았으나 투과광율대(透過光率對) 엽면적비(葉面積比)는 고수량지(高收量地) 벼에서 높았다. 9. 순동화량(純同化量)은 저수량지(低收量地) 벼에 비(比)하여 고수량지(高收量地)벼에서 많았으며 이는 또한 엽면적(葉面積)이 증가(增加)됨에 따라 감소(減少)되었다. .10. 고수량지(高收量地) 벼는 저수량지(低收量地) 벼에 비(比)하여 유수형성기(幼穗形成期) 이후(以後) 체내질소(體內窒素), 가리(加里) 및 규산(珪酸)의 함유율(含有率)이 높으면서 $K_2O/N$, $SiO_2/N$ 비(比)가 높았다.11. 저수량지(低收量地) 벼는 고수량지(高收量地) 벼에 비(比)하여 출수기(出穗期)에 보유(保有)된 질소(窒素), 인산(燐酸), 가리(加里) 및 마그네슘등이 출수이후(出穗以後) 이삭으로의 이행율(移行率)이 높았다. 이는 저수량지(低收量地) 벼가 생육후기(生育後期)에 양분(養分)의 흡술량(吸收量)이 부족(不足)하여 체내(體內) 저장양분(貯藏養分)이 재이동(再移動)되기 때문이며 따라서 하엽(下葉)은 양분부족(養分不足)으로 조길고사(早期桔死)가 많아지는 것으로추정(推定)되었다. 12. 고수량지(高收量地) 벼는 질소흡수(窒素吸收)가 전생육기간(全生育期間)을 통(通)하여 완만(緩慢)하며 출수이후(出穗以後)에도 흡수량(吸收量)이 많으나 저수량지(低收量總) 벼는 출수이전(出穗以前)에 많고 출수이후(出濾以後)는 거의 흡수(吸收)되지 않았다. 13. 출수기(出穗期)의 체내(體內) 질소(窒素), 가리(加里) 함유율(含有率)과 수량(收豊)과는 현저(顯著)한 정(正)의 상관(相關)이 성립(成立)되였으며 수확기(收獲期)의 가리(加里), 규산함유율(珪酸含有率) 그리고 $K_2O/N$, $SiO_2/N$과 수량(收量)과도 현저(顯著)한 정(正)의 상관관계(相關關係)가 성립(成立)되었다. 14. 출수기(出穗期)에 보유(保有)된 전분(澱粉)이 이삭으로의 이전(移轉)은 고수량지(高收量地) 벼가 약(約) 10%인데 반(反)하여 저수량지(低收量地) 벼는 약(約) 40%로 많았다. 따라서 저수량지(高收量地) 벼는 출수(出穗) 이후(以後) 동화의존도(同化依存度)가 높았다. 15. 고수량지(高收量地) 벼는 저수량지(低收量地) 벼에 비(比)하여 질소(窒素), 인산(燐酸), 가리(加里), 규산(珪酸) 및 망간의 흡수량(吸收量)이 현저(顯著)하게 많았고 생육시기별(生育時期別) 흡수량(吸收量)의 차이(差異)는 유수형성기(幼穗形成期) 전후(前後)에 현저(顯著)하였다. 16. 수확기(收穫期)의 질소(窒素), 인산(燐酸), 가리(加里), 석탄(石炭), 마그네슘, 규산(珪酸) 및 망간의 총흡수량(總吸收量)과 수량(收量)과는 고도(高度)의 정(正)의 상관관계(相關關係)가 인정(認定)되었다. 17. 수확기(收穫期)에 질소(窒素), 인산(燐酸), 가리(加里), 석탄(石炭), 마그네슘 및 규산(珪酸)의 흡수량(吸收量)과 수당입수간(穗當粒熱間)에, 질소(窒素) 및 가리(加里)의 흡수량(吸收量)과 수수(穗數)와는 유의적(有意的)인 정(正)의 상관관계(相關關係)가 성립(成立)되었다.

• 핵의학기술
• /
• 제20권2호
• /
• pp.54-61
• /
• 2016

1. 목적 성조숙증은 2차성징의 발달이 여아에서는 8세 이전 남아에선 9세 이전에 조기 2차성징이 출현하는 증상으로 골단의 조기 폐쇄를 일으켜 결국 최종 성인 신장의 감소를 가져오는 질환이다. 본 연구는 성조숙증으로 내원한 여아들의 GnRH(Gonado-tropin-releasing Hormone) 자극검사 결과와 의무기록을 후향 분석하여 진단별 차이를 알아보고자 하였다. 2. 방법 2015년 2월부터 2015년 12월까지 분당서울대병원 소아청소년 내분비내과를 내원한 여아 118명을 대상으로 하였다. 의무기록을 후향 분석하여 대상 환아들은 진성 성조숙증(true precocious puberty) 57명, 조기사춘기(early puberty) 39명, 유방 조기발육군(premature thelarche) 22명을 진단별로 분류하였다. 진단 당시의 신장, 체중, Tanner stage, 골연령, 역연령, 부모의 키, GnRH 검사에서 LH, FSH와 E2 (Estradiol) Basal 값도 함께 조사하였다. 성선 자극호르몬 결과값 LH (Basal,30min,45min,60min) FSH(Basal,30min,60min)을 비교하여 각 그룹별 LH, FSH Peak치 분포도와 LH 최고치/LH 기저치 비율에 대한 평균${\pm}$표준편차와 LH 최고치/FSH 최고치 비율에 대한 평균${\pm}$표준편차를 비교하여 각 3그룹 간 유의확률(P-value) 값을 구하였다. 골연령의 측정은 Greulich-Pyle법(왼쪽 수근골 X선 사진을 촬영하여 골성숙도를 평가하는 방법- 6개월 단위의 표준손목사진을 보고 비교해서 골연령을 유추하는 방식)을 이용한 소아 청소년 내분비내과 교수가 직접 판독한 결과로 사용하였고 GnRH 검사는 합성 LHRH 100 ug을 정맥 주사하여 LH는 Basal, 30분, 45분,60분 후에 채혈된 결과값과 FSH는 Basal, 30분, 60분후에 채혈된 결과값을 조사하였다. 3. 결과 진성성조숙증그룹의 평균 키는$131{\pm}14.85$, 평균체중은 $8.80{\pm}4.93$, 평균역연령은 $7.1{\pm}0.81$, 평균 골연령은 $9.9{\pm}0.9$, 조기사춘기 그룹의 평균키는 $134{\pm}5.10$, 평균체중은 $28.50{\pm}4.43$, 평균역연령은 $8.05{\pm}0.03$, 평균 골연령은 $10.0{\pm}0.62$, 유방조기발육군의 평균 키는 $129{\pm}6,01$ 평균체중은 $28.65{\pm}5.98$, 평균역연령은 $7.02{\pm}0.58$ 평균 골연령은 $8.04{\pm}1.29$로 세 그룹간에 키와 체중 비교 시 유의한 차이가 없었고 역연령(P < 0.0001), 골연령( P< 0.0001), 골연령과 역연령과의 차이(P < 0.0002 )에서는 그룹간 유의한 차이가 있었다. 각 그룹별 LH, FSH Peak치 분포도 비교시 진성성조숙증 그룹은 LH 30분-82.5%, 45분-12.3%, 60분-5.3%, FSH 30분-8.8%, 60분-91.2%로 높은 Peak치를 보였고 조기사춘기 그룹은 LH 30분-79.5%, 45분-17.9%, 60분-2.6%, FSH 30분-7.7%, 60분 -92.32%로 높은 Peak치를 나타내었다. 유방조기 발육군 그룹에서는 LH 30분-30%, 45분-59%, 60분-9.09%, FSH 30분 -0%, 60분-100%로 Peak치를 나타내었다. LH Peak/LH basal ratio 비교시 진성성조숙증 그룹은 $19.09{\pm}17.15$, 조기사춘기 그룹은 $15.23{\pm}10.88$ 유방조기 발육군 그룹은 $4.93{\pm}4.36$으로 3 그룹간 유의한 차이를 보였다(P < 0.0001). LH Peak/FSH Peak ratio 비교시 진성성조숙증 그룹은 $1.222{\pm}0.77$, 조기사춘기 그룹은 $1.34{\pm}1.23$ 유방조기 발육군 그룹은 $0.3{\pm}0.09$로 3 그룹간 유의한 차이(P < 0.0001)를 보였다. 4. 결론 여아들의 진성성조숙증을 진단하기 위한 GnRH Test 검사는 자극 후 30분과 60분 사이에 LH 최고치가 기저치에 비해 2~3배 이상 증가 되어 있거나 또는 5~10 IU/L 이상 증가되었을 때 유용한 판정 자료로 이용 될 수 있는 핵의학 연속검사라고 사료되어진다.

• 한국수산과학회지
• /
• 제15권1호
• /
• pp.1-25
• /
• 1982

우리나라 남서부에 위치한 대표적 인공호인 옥정호에서 1980년 5월부터 1981년 8월까지 16개월 동안 매월 호소의 이화학적 요인들과 동식물 Plankton의 계절적 변동과 수직적 변동, 그리고 어류상 등을 조사하여 종합적인 육수생물학식 연구를 시행하였다. 표층수의 수온은 8월에 최고 $28.2^{\circ}C$, 1월과 2월에 최저 $3.5^{\circ}C$였다. 저층인 수신 40m 깊이의 수온은 9월이 최고 $8.5^{\circ}C$, 2월에 최저 $3.5^{\circ}C$로서 그 차이는 $5^{\circ}C$였다. 수온 만화에 따른 수온 탁층의 분포 및 수직 안정도를 보면 11월부터 3월까지 저수온기에는 완전 수직혼합이 일어나며 2월에는 표층에서 저층까지 모두 $3.5^{\circ}C$였다. 4월부터 6월까지 표층수 수온의 상승으로 인하여 표층부터 l0m 수신의 층까지에 걸쳐 양층이 형성되며, l0m 이하의 저층수는 $5.6\sim7.1^{\circ}C$의 범위로 성층이 생겼다. 고수온의 표층은 점점 깊어져 $7\sim10$월에는 $15\sim25m$ 수신에 수온탁층이 형성되어 수직 혼합이 일어나는 표층과 안정된 저층으로 구분되었다. 8월의 표층수는 $28.2^{\circ}C$, 저층수온도 상당히 상승되어 9월에는 $8.5^{\circ}C$까지 상승하여 호수의 혼합이 의외로 큰 것을 알 수 있었다. pH의 년중변화는 표층에서 6.8(1월)$\sim$9.0(8월)의 범위이며, 중층에서는 $6.5\sim7.0$, 저층에서는 $6.0\sim7.5$ 였다. DO는 년중 보화상태였고, 저수온기인 겨울철에는 약간 과보화 상태였으며, 년중 각 DO의 약층은 나타나지 않아, 저층까지 DO양은 비교적 높았다. 투명도는 최고가 2월에 4.6m 였고, 최저가 8월에 1.7m 였으며 1980년 8월의 예비조사시에도 8월에 0.9m로 조사기간중 최하였다. 이렇게 낮은 투명도는 이 때 최대로 번모한 Anabaena spiroides, Melosira granulata 등 때문인 것으로 생각된다. 염소양, 지산태 지소, COD, 인산염의 분석결과는 1980년의 값에 비하여 1931년의 값이 다소 증가된 경향을 보인다. 또 칼슘, Mg, Fe와 같은 무기물질들의 분석결과로 보아 옥정호의 수질은 연수로 평가되었고 크룸이나 수은과 같은 중금속물질들도 극히 미양 검출되었다. 조사기관신 본 호에서 채집된 Plankton의 출현종은 모두 7과 72속 107종이었다. 그 중 Phytoplankton은 Cyanophyta가 12종, Bacillariophyta 19종, Chlorophyta 23종이었고, Zooplankton은 Protozoa14종, Rotifera 29종, Cladocera 4종, Copepoda 6종이었다. Phytoplankton의 생산은 $7\sim10$월의 대번식(Peak는 10월 $1,504\times10^3\;cells/l$)과 $1\sim4$월의 소번식(Peak2월 $236\times10^3\;cells/l$)의 2회의 Peak를 나타냈다. Phytoplankton의 종 조성 만화의 양상을 보면 Melosira granulata, Anabaena spiroides와 같이 고수온기인 $7\sim10$월에 번무하는 무리, Asterionella gracillima, Synedra acus, S. ulna와 같이 저수온기에 다양 출현하여 겨울철에 번무하는 무리, 그리고 Microcystis aeruginosa, Ankistrodesmus falcatus와 같이 소양씩 주년 출현하는 세 무리로 대별할 수 있다. Zooplankton의 종 조성 및 출현 양상을 보면 주요 종들은 Thermocyclops taihokuensis, Difflugia corona, Bosmina longirostris, Bosminopsis deitersi, Keratella quadrata, Asplanchna priodonta, A. herricki 등이며, 이들은 $10\sim11$월부터 익년 2월 혹은 4월까지의 저수온기에 출현이 없거나 있어도 매우 적었다. 수직 일견변동은 주로 Microcystis aeruginosa, M. incerta, Anabaena spiroides, Melosira granulata, Bosmina longirstris에 의하여 나타났다. 특히 M. granulata는 일몰과 더불어 저층으로 밀집하는 이동을 했으며 B. longirostris는 일몰과 더불어 표층으로 부상하고 일출과 더불어 전 수층에 확산되는 양상을 보였다. 본 호에서 채집된 어류는 10과 31속 41종이었다. 그 중 Pseudoperilampus uyekii와 Coreoleuciscus splendidus를 포함한 13종의 어류는 한국 특산종으로 우리나라의 다른 호소들에 비하여 어류상이 다양하였다.

• 한국유통학회지:유통연구
• /
• 제17권2호
• /
• pp.1-28
• /
• 2012

본 연구는 Sheth and Parvatiyar(1995)가 제시한 관계형 시장 행동의 가정과 정의에 대한 Bagozzi(1995), Peterson(1995)의 논평에 기초해 관계 마케팅 방식으로서 로열티 프로그램이 고객 참여와 소비자-브랜드 관계에 기초한 관계형 시장 행동에 미치는 영향을 실증해 보았다. 다음과 같이 연구 결과와 시사점을 정리한다. 첫째, 로열티 프로그램의 관계적 성과를 검증한 결과, 로열티 프로그램이 고객의 참여, 소비자-브랜드 관계, 관계형 시장 행동에 미치는 긍정적 효과를 실증하였다. 선행 연구에서의 주장과 일치하는 이러한 결과는 소비자와 기업이 마케팅 관계에 참여하려는 의지와 능력은 더 높은 마케팅 생산성을 낳는다는 Sheth and Parvatiyar(1995)의 제안 명제를 확인시켜 주고 있다. 둘째, 소비자-브랜드 관계의 매개효과 그리고 소비자-브랜드 관계의 구성 변수와 관계형 시장 행동의 구성 변수간 영향을 미치는 개별적인 인과 관계에 대해 일관된 결과를 보이지 않고 있다는 주장(Palmatier, Dant, Grewal and Evans, 2006)에 따라 다중 회귀분석으로 추가 분석을 실시한 결과, 소비자-브랜드 관계의 질적 특성을 이루는 여섯 개 항목들이 개별적으로 관계형 시장 행동에 영향을 미치는 회귀 모델의 설명력이 더 높다는 Breivik and Thorbjornsen(2008)의 연구결과를 지지하는 결과를 얻었다. 셋째, 고객의 참여를 활성화시킬 때 소비자-브랜드 관계 및 관계형 시장 행동이라는 관계 성과가 나타난다는 시사점을 제시하였다. 이는 관계 마케팅 활동과 고객 참여를 증가시키려는 노력이 소비자와의 관계 유지와 성과에 중요하다는 선행 연구의 주장 (Bitner, 1995, Fournier, 1994 ; Sheth and Parvatiyar, 1995)에서 뒷받침된다.