• 한국건설관리학회논문집
• /
• 제24권2호
• /
• pp.13-23
• /
• 2023

도로, 철도 등의 토목시설공사는 제한된 구역에서 공정이 반복적으로 진행되는 건축공사와 달리 수십 km의 수평적 작업공간에서 선형 형태로 공정이 진행되고, 개별 공정은 시점부터 종점까지 거리 단위를 갖는 측점(Station)번호로 관리되고 있다. 이러한 이유로 공정의 작업 위치정보가 주요 관리요소가 되고 있으므로, 일정 정보만을 표현하는 간트공정표기반의 공정관리 체계는 한계점을 가질 수 있다. 본 연구에서는 공정의 시작 및 종료일을 나타내는 일정정보와 시작 및 종료 거리를 나타내는 위치정보를 동시에 표현할 수 있는 선형공정표의 구성 방법론을 제시하고, 이에 근거한 선형공정표 생성 시스템을 개발한다. 연구에서 선형공정표의 좌표축은 X, Y축을 각각 거리와 일정 값으로 구성하였으며, 개별 공정은 작업 내용을 유추할 수 있는 심볼로 표현하여 단순 막대도표 방식 대비 공정표의 시인성을 높였다. 개발된 선형공정표 생성 시스템은 철도시설 교량공사의 실제 공정 데이터를 활용하여 실무적 활용성을 검토하였다.

• 한국건설관리학회논문집
• /
• 제5권5호
• /
• pp.135-142
• /
• 2004

본 연구에서는 바차트(bar chart) 기법과 CPM 기법의 장점을 결합한 CPM bar chart(CBC) 기법을 제시한다. CBC는 기존의 fenced bar chart(FBC)의 장점을 유지하면서 단점을 보완한 것으로, 작업 관계를 나타내는 fence에 방향성을 부여함으로써, 기존 FBC에서 상당한 혼란을 유발하는 fence의 분리과정 없이 작업들의 관계를 표현할 수 있다. 또한, fence의 분리를 파악하기 위해 더미작업(dummy activity)을 확인하는 과정이 생략되어 보다 손쉽게 작성할 수 있는 장점도 있다. 바차트의 간결성을 유지하면서 CPM의 네트워크 논리 표현이 가능해짐에 따라, CBC는 다양한 프로젝트 참여자들 간의 원활한 의사소통에 기여하리라 예상된다. 또한, resource constrained scheduling, resource leveling, 작업 분리가 고려된 일정 조정, 공기 지연 분석 등의 CPM 기법에 기초한 다양한 일정 계획 및 관리에도 적용이 용이하여, 실무뿐만이 아니라 공정관리 교육과정에서도 활용성이 높으리라 기대된다.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.156-165
• /
• 2000

This paper describes modeling and simulation of automotive forward collision warning and avoidance system using CASE(Computer-Aided Systems Engineering) tool. The system is composed or many sensors, a controller, warning devices, brakes and etc. The system was modeled by one activity chart, fourteen state charts and one module chart. Rear-end collision scenarios was generated by Simulink and used to support Stalemate model. The resulting model was used to evaluate the correctness of function and behavior of the system. A simulator for the system has been designed and used to validate the model under realistic operating conditions in the laboratory. To model and simulate the system's functionality and behavior brings clarity to system design early in the system development.

• 대한산업공학회지
• /
• 제14권2호
• /
• pp.71-80
• /
• 1988

The primary purpose of this study is to develop an automation tool capable of converting the specification of structured analysis into that of structured design. Structured Analysis and Structured Design Language (SASDL) is a computer-aided description language based on ERA model and particulariged by ISLDM/SEM. The automation tool utilizes the specifications of data flow diagram described in SASDL to produce their corresponding SASDL specification of structure chart. The main idea behind the automatic conversion process is to categorize the bubbles in data flow diagram and to determine the positions of the bubbles in structure chart according to their categories and the relative locations in data flow diagram. To make the problem into manageable size, the whole system is broken down into separate parts called activity units. A great deal of manual jobs, such as checking processes leveling, checking data derivation of processes, deriving structure chart from data flow diagram, checking any inconsistency between data flow diagram and structure chart and so forth, can be automated by using SASDL and conversion tool. The specification of structure chart derived by conversion tool may be used in an initial step of design to be refined by SASDL users.

• 한국의류학회지
• /
• 제17권4호
• /
• pp.587-601
• /
• 1993

In the order to grasp their physical characteristics stemming from activity amount, this paper has divided elderly women into the following group ; those with high activity in the past, those with low activity in the present, those with high activity in the present and those with low activity in the present. The analyses of the body measurements and the pie chart, and the classification of back shapes by taking photographs have led to the following results. 1. The items of depth and girth among the body measurements were significant in the past and the present activity. Those with high activity in the past had smaller sizes in depth and girth than those with low activity. 2. From the pie chart, it was shown that those with high activity in the past had smaller sizes in every index as well as in girth than those with low activity in the past. Both those with low activity in the present and those with medium activity in the present had somewhat large sizes in waist girth, bust girth, hip girth and abdominal girth and in the indices of these items. 3. The classification of back shapes by taking photograpes has shown that those with high activity in the past had the less bent body type-42 percent of Type A and 6.5 percent of Type D. Among those with medium activity in the present, Type A was most outstanding and Type C and Type D were less, This fact shows that those with medium activity in the present keep the most normal body type. This proves that the medium activity of elderly women is desirable for keeping the normal body type.

• Ocean and Polar Research
• /
• 제25권2호
• /
• pp.133-145
• /
• 2003

Deep-sea surface sediments were collected using a multiple corer at 20 stations of Clarion-Clipperton fracture zone in the northeast equatorial Pacific to understand latitudinal and longitudinal variations of geotechnical properties. There was a distinct latitudinal variation of geotechnical properties in the study area. The northern sediments showed finer grain size, lower water content and porosity, higher bulk density and specific grain density, lower liquid limits and plastic limits than their southern counterparts. The northern sediments are classified into inorganic clays of low plasticity (fat clays) on plasticity charts and normal to active clay on activity chart, whereas, the southern sediments are classified into fine-grained, highly-plastic, inorganic and biogenic silt or organic clays on plasticity chart and normal to very active clay on activity chart. When shear strength are considered, the northern sediments were found to be in unconsolidated states, while the southern ones to be normal to over-consolidated states. These latitudinal variations in sediment characteristics are likely caused by differences in productivity of surface water that controls sediment compositions, sedimentation rates, and grain solubility.

• 정보교육학회논문지
• /
• 제16권4호
• /
• pp.489-502
• /
• 2012

현재 컴퓨터교육에서 알고리즘 교육의 중요성은 강조되고 있지만 주어진 문제를 알고리즘으로 표현하고 표현된 알고리즘을 해석하는 방법에는 비교적 연구가 미약하였다. 본 연구에서는 알고리즘의 표현 도구 중 순서도에 대해 초등학교 저학년 대상으로 놀이 활동 기반 학습 방법을 개발하고 실제 수업에 적용하여 학습 가능성을 진단하여 보았다. 학습 놀이는 순차형 놀이, 선택형 놀이, 반복형 놀이와 퍼즐 맞추기 게임으로 4가지이며 퍼즐 맞추기 게임은 학습 놀이 내용을 순서도 카드를 활용하여 실제 순서도로 재구성하는 게임이다. 순서도 학습 후 성취도 평가에서는 학습 놀이 기반으로 수업을 진행한 집단이 ICT기반으로 학습한 집단보다 상대적으로 평균은 약 7.5% 높게 나타났으며 두 집단 모두 학습 후 평균이 10점 만점에 9점 이상을 보였다. 이는 순서도 교육이 초등학교 저학년도 학습 가능하며 특히 놀이 활동을 통한 교육이 효과적이라는 것을 보여준 것이다.

• 수산해양교육연구
• /
• 제16권2호
• /
• pp.227-237
• /
• 2004

Recently development trends in information technology expand the activity boundaries for human living beyond coastal zones. These rapid changes of paradigm are stimulating scientists and strategists to be encouraged in making adequate model for marine geographic information system (MGIS) and their applications. Coastal zones are places which are affected by many factors, such as water quality, tide, wave, atmosphere, population, industry, etc. Therefore information related to the coast has to be integrated and analyzed for managing it efficiently. GIS-based Ocean Informatics is suited for those purposes and used in the study for establishing and managing coastal geographic and environmental information system. This paper reviews the properties of ocean and coastal spaces, then defines some MGIS related terminologies for clarifying the scope of MGIS boundaries. In this study, coastal geographic information is established by digital geographic information and digital terrain information. Digital coast chart having information on digital chart and map can merge and analyze various coastal information and can be a useful tool for the coastal integrated management.

• 대한토목학회논문집
• /
• 제38권4호
• /
• pp.601-610
• /
• 2018

건축공사는 제한된 공간에서 수직적으로 반복 작업이 진행되므로 공정관리에서 작업의 위치 정보에 대한 필요성이 크지 않다. 반면에 도로 및 철도시설과 같은 토목공사는 다량의 토공사, 장대교량, 장대터널 등으로 구성되며, 이러한 공종들은 수 십 KM에 이르는 선형축에 따라 수평적 공간에서 작업이 진행된다. 즉, 모든 공정들이 사업의 시점부터 종점까지 거리단위로 작업 현황이 관리되므로, 공정관리 도구에서도 작업 일정과 함께 해당 공정의 위치정보를 연동하여 표현하는 것이 사업관리의 효율성을 높일 수 있다. 본 연구에서는 이러한 선형축 기반의 시설물 공정관리에 특화된 선형공정표 구성방법론을 구성하여 기존의 대표적 공정표인 간트공정표와 비교하여 활용성을 분석한다. 또한 최근 시공단계의 대표적 BIM기술로 적용되고 있는 4D CAD시스템에 선형공정표의 연동 방법론을 제시하여 토목공사에 BIM활용성을 높이고자 하며, 제시된 방법론에 대해 통계학적 검증으로 실무 활용성을 분석한다.

• 한국사회복지학
• /
• 제40권
• /
• pp.97-130
• /
• 2000

The purpose of this paper is a case study on welfare QC circle which is considered as one of the management techniques to improve service quality among recently changing welfare environment. Futhermore this paper is also to suggest a new introduction of the welfare QC circle in korean social welfare agency. To accomplish these purpose, this study theoretically examines activity process and techniques of welfare QC circle. In practice, three social workers and one supervisor working at 'D' community welfare center in pusan are participated during six months. As a result, we founded the specific problems that is aroused from youth volunteer group within by fish bone chart, and proposed the alternative choices by 5W1H check sheet, and also certified to decrease turnover ratio in youth volunteering by pareto chart. This study, however, has its limitation in selection only one case study on welfare QC circle of youth volunteering. Welfare QC circle could be much contributed as one of the management techniques to enhance the quality of social welfare service from the viewpoint of the customer, If it is well developed korean welfare QC model which is suitable to social welfare organization and service. Therefore, in order to introduce welfare QC circle in korean social welfare organizations, I would like to suggest to find out a useful text of welfare QC and organize some welfare QC study groups including other suggestions.