• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2007년도 학술대회 1부
• /
• pp.367-372
• /
• 2007

현재 펜기반 컴퓨팅 환경에서 주로 쓰이는 문자 입력 방식은 화상키보드이다. 그러나 화상키보드는 펜 컴퓨터를 위해 나온 것이 아니기에 차지하는 화면의 크기나 움직임 거리등의 문제가 있다. 본 논문에서는 그러한 단점을 개선하기위하여 모바일 장치의 키패드를 이용하여 새로운 입력방식을 제안한다. 햅틱 피드백 디바이스인 ActivePen의 기능을 이용하여 보다 효율적인 멀티탭 방식의 키패드인 Stair-tap과 Time-tap을 소개하고 사용성 평가 결과를 보여준다.

• 한국전기전자재료학회논문지
• /
• 제26권12호
• /
• pp.853-857
• /
• 2013

We design, develope and test a parallel active polymer pen lithography (PPL) device, which consists of individually addressable elastomeric probe tips. The PPL array chip is fabricated using soft lithography method with polydimethylsiloxane (PDMS) material. Individual probe can be pneumatically actuated via a computer controlled interface. We demonstrate parallel writing with 16 individually addressed pens, with each pen producing a different pattern in the same run. The largest proof-of-concept array fabricated is $4{\times}4$ with a spacing of $250{\mu}m$ in both x and y axes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.922-929
• /
• 2006

In this study, flow characteristics of the FPN (Fountain Pen Nano-Lithography) using active membrane pumping are investigated. This FPN has integrated chamber, micro channel, and high capacity reservoir for continuous ink feed. The most important aspect in this probe provided control of fluid injection using active membrane pumping in chamber. The flow rates in channel by capillary force are theoretically analyzed, including the control of mass flow rates by deflection of membrane. The above results are compared with numerical simulations that calculated by commercial code, FLUENT. The velocity of fluid in micro channel shows linear behaviors. And the mass flows are proportional to the second order function of pumping pressure that is imposed to membrane.

• 대한기계학회논문집B
• /
• 제30권8호
• /
• pp.722-730
• /
• 2006

In this study, the flow characteristics of a FPN (Fountain Pen Nano-Lithography) using active membrane pumping are investigated. The FPN has integrated chamber, micro channel, and high capacity reservoir for continuous ink feed. The most important aspect in this probe provided control of fluid injection using active membrane pumping in chamber. The flow rates in channel by capillary force are theoretically analyzed, including the control of the mass flow rates by the deflection of the membrane. The above results are compared with the numerical simulations that calculated by commercial code, FLUENT. The velocity of the fluid in micro channel shows linear behaviors. And the mass flows are proportional to the second order function of the pumping pressure that is imposed to the membrane.

• 디지털융복합연구
• /
• 제17권3호
• /
• pp.161-168
• /
• 2019

전자펜의 소비자 활용도 및 제품 개선점 분석을 위해 Davies(1989)의 TAM 모형을 적용하여 전자펜 사용자들의 지각된 유용성, 이용용이성 및 기대가치를 통한 기술수용의도를 분석하였다. 연구방법으로 기업 설문내용에 기반 한 내용분석법과 고객들의 참여도인 Activity 분석을 통해 전자펜 제품의 기술수용정도와 제품 전략의 개선점을 도출하였다. 연구결과 전자펜의 활용도를 보인 고객들은 30~49세의 남성과 사무직과 연구원으로 나타났으며, 개선사항에 대한 키워드 중심의 내용분석법의 분석결과 전원동작의 개선, App 연계 펜 기능의 확장성, 전자펜의 수정기능, 펜의 데이터인식 기능, 전자펜이 펜으로서의 필기감, 그립감, 펜 굵기 선택 등 세분화 기능의 개선, 타 스마트 기기와의 동기화 개선과 충전기능의 개선 필요성이 추출되었다. 본 연구는 전자펜에 TAM을 적용하여 전자펜이 초기시장에서 주류시장으로 확산되기 위한 제품속성 개선점을 제시하였고 향후 스마트폰이나 아이패드 등 스마트 디바이스와 연계된 전자펜 제품 확산과의 차이점 규명 통해 차별화 된 시사점을 제공할 수 있을 것이다.

• 한국패류학회지
• /
• 제22권2호
• /
• pp.143-150
• /
• 2006

The gonad index, condition index, reproductive cycle and spawning of the pen shell Atrina (Servatrina) pectinata were investigated using samples from the subtidal zone of Nokdo on the Boryeong coastal waters of Korea. Samples were collected monthly by SCUBA divers for one year from January to December, 2001. A. (Servatrina) pectinata is dioecious and oviparous. The spawning season of this species occurred once a year from June to August, with the main spawning occurring between June and July when the seawater temperature was around $20^{\circ}C$. Ripe oocytes were about 60-65 ${\mu}m$ in diameter. The reproductive cycle of this species could be classified into five successive stages; early active stage (November to March), late active stage (February to May), ripe stage (April to July), partially spawned stage (June to August), and spent/inactive stage (August to October). Monthly changes in the gonad index reached a maximum (4.6) in May (ripe stage), thereafter, the GI values gradually decreased from June to August when spawning occurred continuously. Therefore, monthly changes in the GI values showed a similar pattern to the gonadal phase. The condition index (CI) of the meat part without the posterior adductor muscle reached the maximum in June (ripe and partially spawned stage) and the minimum in September (spent/inactive stage), Accordingly, monthly changes in the condition indice of the meat part without the posterior adductor muscle coincided with the gonadal phases.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.287-287
• /
• 2010

We report a new direct patterning method, called liquid bridge-mediated nanotransfer molding (LB-nTM), for the formation of two- or three-dimensional structures with feature sizes between tens of nanometers and tens of micron over large areas. LB-nTM is based on the direct transfer of various materials from a mold to a substrate via a liquid bridge between them. This procedure can be adopted for automated direct printing machines that generate patterns of functional materials with a wide range of feature sizes on diverse substrates. Arrays of TIPS-PEN TFTs were fabricated on 4" polyethersulfone (PES) substrates by LB-nTM using PDMS molds. An inverted staggered structure was employed in the TFT device fabrication. A 150 nm-thick indium-tin oxide (ITO) gate electrode and a 200 nm-thick SiO2dielectric layer were formed on a PES substrate by sputter deposition. An array of TIPS-PEN patterns (thickness: 60 nm) as active channel layers was fabricated on the substrate by LB-nTM. The nominal channel length of the TIPS-PEN TFT was 10 mm, while the channel width was 135 mm. Finally, the source and drain electrodes of 200 nm-thick Ag were defined on the substrate by LB-nTM. The TIPS-PEN TFTs can endure strenuous bending and are also transparent in the visible range, and therefore potentially useful for flexible and invisible electronics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.159-161
• /
• 2007

We fabricated flexible OTFT-backplanes for the electrophoretic display(EPD). The OTFTs employed bottom contact structure on PEN substrate and used the cross-linked polyvinylphenol for gate insulator, pentacene for active layer. Especially, we used PVA/Acryl double layers for passivation of backplane as well as for pixel dielectric layer between backplane and EPD panel. The OTFT-EPD panel worked successfully anddemonstrated to display some patterns.

• 한국수산과학회지
• /
• 제39권5호
• /
• pp.398-403
• /
• 2006

Gonad development and the gametogenic cycle of pen shells, Atrina pectinata, collected from November 2004 to October 2005 in the coastal waters of Jangheung, Jeollanam-do, Korea were investigated histologically. The clams are dioecious. The gonads consist of a number of gametogenic follicles. The sex ratio (Female:male) was 1:1.2. The gonad index (GI) reached a maximum in May and a minimum in July. The condition index (CI) reached a maximum in April and a minimum in June. The gonadosomatic index (GSI), GI and CI all increased with gonad development. The gametogenic cycle of the clam could be divided into five stages: the degenerative/inactive (August to October), early active (November to March), late active (December to April), ripe (May to June) and spent (June to July) stage.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권4호
• /
• pp.463-469
• /
• 2005

An attempt was made to analyze the factors affecting mating performance of rams in pen mating systems. Due to many types of social interactions, mating performance of rams may decrease or increase. Six intact Muzaffarnagari rams were used and divided into three dominant subordinate pairs by food and ewe competition test. For dominant rams subordinate ram became competitor and vice versa. In the first experiment, ram was exposed to ewe but the competitor ram was kept outside the pen with the facility of visibility only. In the second experiment each ram was exposed to ewe along with the competitor ram and in third experiment ram was exposed to ewes (two) along with competitor ram in observation pen. Recordings of different mating and agonistic behaviour were done in all the experiments. It was found that subordinate ram's mating behaviour was inhibited by mere presence of a dominant ram out side without physical contact. However, when ram exposed to oestrus ewe(s) along with competitor ram, both dominant and subordinate rams spent much of their time in guarding activities instead of mating. In addition dominant ram tried to curtail the subordinate ram mating by agonistic interaction like fight and butting. Different guarding activities were observed either as active or passive type depending on level of dominanace. It was concluded that in a limited space the interaction of two or more rams might affect the number of services adversely.