• 대한치과의사협회지
• /
• 제57권3호
• /
• pp.175-184
• /
• 2019

Increasing the aesthetic needs of patients and decreasing the use of amalgam had led to increased demand for dental resin composite. Thereby, light curing unit (LCU) has become an essential equipment in dental clinic. To ensure long-term prognosis of photopolymerized materials, LCU should have a uniform and consistent radiant output and an emission spectrum that includes the active wavelength range of photoinitiators. In addition, when the correct use and thorough maintenance and repair of LCU are performed, the higher success rate of restoration using photopolymerization materials will be achieved.

• Bulletin of the Korean Chemical Society
• /
• 제26권5호
• /
• pp.715-716
• /
• 2005

• 전자공학회논문지S
• /
• 제34S권12호
• /
• pp.106-113
• /
• 1997

While driving, the low frequency interior noise below 200Hz causes the main component that irritates the auditory acoustic sense. But these passive control methods bring out increment in cost and weight of the vehicle and result in low efficiency. Recently, various ANC(Active Noise Control) methos to suppress the low frequency noise began to launch into application. In this study, we implemented the active noise control system for passenger vehicle to cancel the engine booming noise using DSP-based control unit, 4 micorphones, and 2 speakers. We used MEFX-LMS (Multiple Error Filtered X-Least Mean Square) algorithm since it can be easily implemented in real time. Also, MEFX-RLS algorithm was taken to enhance the suppression of the harmonic components of the engine booming noise inspite of its computational complexity. The performance of two adaptive algorithms were analyzed with experimental resutls.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.969-974
• /
• 2008

As the railway becomes higher, the reliable stability and riding comfort of higher railway are required. To improve the riding comfort of high-speed trains, it is very helpful to use active suspension system for railway. In Japan, the high-speed train, Shinkansen has adopted semi-active suspension system and now it is running in the main trunk. In this paper, the authors introduce several technical trends of vibration control methods of Japanese Shinkansen. And the installation of semi-active suspension to HSR 350x and the test result of test run on the Kyoung-Bu high speed ling are also explained. After development of HSR 350x, new R&D national project of high speed train is progressed by Ministry of Land, Transport, and Maritime Affairs. This project is the development of Electric Multiple Unit of high speed train with 400km/h of maximum test speed. These result would be helpful to progress next generation high speed project.

• 대한산업공학회지
• /
• 제26권3호
• /
• pp.227-237
• /
• 2000

A workflow management system is a software system to assist designing processes, controlling and managing the execution of the designed processes. One emerging trend in many recent information systems is the provision of process management functions. In this paper, we propose a method of designing processes for automatic process execution directly from process modeling. First of all, the concept of block is presented which is to define a nested process model. A block is the minimum unit that can specify the relationships of process components, i.e., tasks. A general process can be defined by a combination of the blocks defined in this paper. An algorithm is developed to transform a general flat process model into a nested model. We identify basic types of blocks and build ECA (Event-Condition-Action) rules for each of the basic types. This allows us to automate the execution of the process model by using the active features of active databases.

• 펄프종이기술
• /
• 제33권5호
• /
• pp.25-29
• /
• 2001

Dimethyldioxirane (DMD), which is a source of active oxygen, is effective agent that can be used in chemical pulp bleaching. In this study, delignification of kraft bagasse pulp has been carried out by using DMD. The effect of the applied charge of DMD (as active oxygen) and pH of the delignification medium were studied. The optimum conditions of the applied DMD charge and pH of the delignification reaction were achieved at pH range from 8~9, 2% of DMD (as active oxygen) and the rest of delignification reaction conditions were $25^{\circ}C$, 60 min, and 12% pulp consistency. The development of brightness per unit kappa number removal (ΔBrightness/ Δ Kappa number) has highest value at the optimum condition. The study showed that the reactivity of kraft bagasse pulp be enhanced to wards alkaline hydrogen peroxide bleaching by pulp treatment with DMD.

• 전자공학회논문지SC
• /
• 제46권4호
• /
• pp.17-22
• /
• 2009

FlexRay는 차량의 성능향상과 많은 전자제어 유닛으로 인해 발생하는 배선 및 성능저하를 개선하기 위한 고성능 통신 시스템 네트워크의 표준이다. 최대 10Mbps의 데이터 전송 속도를 가지며 2개의 채널을 통해 동시에 전송할 수 있다. FlexRay 시스템을 하드웨어로 구현하기 위해 SDL로 설계된 결과를 토대로 Verilog HDL을 이용하여 설계하였고, Magna/Hynix 0.18 um 공정을 이용해 Synopsys Design Compiler를 사용해 합성하였다. FlexRay 시스템에서 여러 노드 사이의 통신 제어를 위해 active star와 passive star가 사용되는데 active star는 최대 10Mbps의 빠른 데이터 전송에 주로 쓰인다. 본 논문에서는 active star를 이용한 FlexRay 네트워크를 구현하기 위해 설계한 FlexRay 시스템 외에 active star를 제어하기 위한 별도의 controller를 구현하였고 하나의 송신노드에 두 개의 수신노드를 연결하여 각각의 수신노드에 다른 프레임 메시지를 전송하는 실험을 통하여 올바른 동작이 이뤄짐을 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.1-4
• /
• 2008

Fuel cells have the potential of providing several times higher energy storage densities than those possible using current state-of-the-art lithium-ion batteries, but current energy density of fuel cell system is not better than that of lithium-ion batteries. To achieve the high energy density, volume and weight of fuel cell system need to be reduced by miniaturizing system components such as stack, fuel tank, and balance-of-plant. In this paper, the thin flexible PCB (Printed circuit board) is used as a current collector to reduce the stack volume. Two end plates are made from light weight aluminum alloy plate. The plate surface is wholly oxidized through the anodizing treatment for electrical insulation. The opening rate of cathode plate hole is optimized through unit cell performance measurement of various opening rates. The performances are measured at room temperature and ambient pressure condition without any repulsive air supply. The active area of MEA is 10.08 $cm^2$ and active area per a unit cell is 1.68 $cm^2$. The peak power density is about 210 mW/$cm^2$ and the air-breathing planar stack of 2 Wis achieved as a small volume of 18 cc.

• 조명전기설비학회논문지
• /
• 제16권5호
• /
• pp.112-118
• /
• 2002

능동 소음제어시스템의 적응필터 알고리즘으로 FIR구조가 많이 사용되고 있으나, FIR 필터는 IIR 필터에 비해 비슷한 성능을 얻기 위해 필터의 차수가 커져야 하므로 계산량이 많아지는 단점이 있다. IIR 필터의 경우는 항상 극점이 존재하므로 안정성에 문제가 많으며 능동 소음 제어 시스템의 작동 초기에 IIR 필터의 극점이 z평면에서 단위 원 밖으로 나가는 경우 시스템 자체가 불안정해질 수 있다. 본 논문에서는 초기에 IIR 필터의 극점을 원점방향으로 끌어당겨 안정도를 개선하고 정상상태에는 원위치로 보내 필터성능에는 영향을 미치지 않는 안정도가 강화된 적응 IIR 필터 알고리즘을 제안한다. 컴퓨터 시뮬레이션을 통해 제안된 안정도가 개선된 IIR 필터의 성능이 우수함을 확인하였으며, 소음실에서 TMS320C6701 DSP 칩을 사용하여 소음제어 실험을 한 결과 안정되게 l0㏈ 이상의 소음 감쇄 효과를 얻었다.

• 지식경영연구
• /
• 제19권2호
• /
• pp.1-19
• /
• 2018

This study aims to identify the causal relationship among public technology transfer, technological performance, and research and development (R&D) productivity. Using the impulse-response function(IRF) of a panel vector autoregressive model (panel VAR), this study suggests the results of how long the factors such as technological performance (patent), public technology transfer, and R&D productivity takes and lasts if a one-unit shock of standard deviation occurs. As a result, first, the increase of public technology transfer activities has no power to increase the technology performance but improve the R&D productivity. If the public institute increases its technology transfer activities by one unit, the R&D productivity will increase within five years. Second, the impact of increasing technological performance on improvement of public technology transfer and R&D productivity is an insignificant. Third, the effect of R&D productivity on the public technology transfer creates a substantial reaction after a current time. Considering the structural relationships among public technology transfer, technological performance, and R&D productivity, if policy makers intend to construct the active R&D circumstance, technology suppliers should be motivated to run the active R&D mechanism because they achieve gains.