• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1289-1299
• /
• 2007

As higher on the industrialization of chemical factories in Korea, it shows a tendency that safety accident happens more times and is bigger on its size. For preventing from and decreasing such accident, PSM(Process Safety Management) system has used in chemical factories. Though it is recognized that PSM is sutable and effective for only a intensive system technically, it could be difficult to apply to all of factories, actually. This study was proceeded for investigating the effect and problems on the application and performanance of PSM into the threshold quantity site and suggesting how fur improvement. The results are as followed; PSM system was not used effectively in the threshold quantity site of medium and small-sized enterprises because of the shortage of experts and the decrease of interest as a deregulation. As the effective performanace of PSM for preventing from industrial accident in threshold quantity site and for sattling as self-system easily, it was concluded to get an active support from the concerned government. First of all, new progrems to improve PSM should be developed continually and the progrems should be educated extensively.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.94-103
• /
• 2003

In case of environment requiring safety such as human body and requiring flexible shape, a conventional mechanical actuator system does not satisfy requirements. Therefore, in order to solve these problems. a research of various smart material such as EAP (Electro Active Polymer), EAC (Electro Active Ceramic) and SMA (Shape Memory Alloy) is in progress. Recently, the highest preferring material among various smart material is EP (Electrostictive Polymer), because it has very fast response time, powerful force and large displacement. The previous researches have been studied properties of polymer and simple control, but present researches are studied a polymer actuator. An EP (Electostrictive Polymer) actuator has properties which change variably ils shape and environmental condition. Therefore, in order to coincide with a user's purpose, it is important not only to decide a shape of actuator and mechanical design but also to investigate a efficient controller. In this paper, we constructed the control logic with an adaptive fuzzy algorithm which depends on the physical properties of EP that has a dielectric constant depending on time. It caused for a sub-actuator to operate at the same time that a sub-actuator system operation increase with a functional improvement and control efficiency improvement in each actuator, hence it becomes very important to manage it effectively and to control the sub-system which Is operated effectively. There is a limitation on the management of Main-host system which has multiple sub-system, hence it brings out the Multi-Vehicle Control process that disperse the task efficiently. Controlling the multi-dispersion system efficiently, it needs the research of Main-host system's scheduling, data interchange between sub-actuators, data interchange between Main-host system and sub-actuator system, and data communication process. Therefore in this papers, we compared the fuzzy controller with the adaptive fuzzy controller. also, we applied the scheduling method for efficient multi-control in EP Actuator and the algorithm with interchanging data, protocol design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3236-3244
• /
• 2011

Negligent accidents are often caused by risk factors of working environment at most construction sites and construction schedules are delayed as the workers' work location and construction progress are not figured out accurately, and this leads to a lot of loss. In this paper, with the object of solving the problems at construction sites, RFID portable device, active tag and wireless RFID reader to provide the status of workers which is based on location are designed in order to send information about the location of workers and work progress in real time to a personal RFID device. Also an application system to monitor workers' approaching to prevent accidents from vehicles and danger zones and to manage the real time location of workers is designed.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.3
• /
• pp.109-115
• /
• 2017

In order to increase the productivity of the logistics center and transportation, we try to articulate the priority ranking factors of the productivity influenced by the personality of the field workers (logistics center workers) and functional workers (drivers) via the AHP technique Individual personality was studied by applying the Big 5 model of psychological factors (openness, Conscientiousness, extroversion, Agreeableness, neuroticism). In this paper, extraversion was critically analyzed as a priority factor. A trait of extroversion is a strongly active and individual personality. In this study, the field workers are logistics center workers and the functional workers are drivers. They are interactively influenced in the In & Out operation. For example, when it comes to 'up and down work' and 'inspection work', the functional workers perform 'up and down work' and 'delivery work' and the field workers perform 'inspection work'. Stressing on the respective work has an affect on work productivity. Inspection workforce has something to do with inventory management. Functional workforce affects the delivery workforce. Delivery work is positively correlated with customer satisfaction. Nevertheless, as a result of research, extrovert personality that has something to do with an energetic activity would not affect on the implementation of their operation. In addition, personal extraversion of workers and drivers in the warehouse can have a significant impact on job commitment and productivity improvement.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.4
• /
• pp.313-324
• /
• 2013

Healthcare optimization is mandatory to strengthen the competitiveness of domestic healthcare industry. Healthcare optimization aims to increase service quality, patient safety, and system efficiency. This paper reviews various healthcare optimization cases of developed countries, synopsizes the current status of domestic healthcare industry, points out several reasons why healthcare optimization is not active in Korea, and suggests some vitalization ways.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.61-73
• /
• 2020

Real-time location-sensing technology using location information collected from IoT devices is being applied for safety management purposes in many industries, such as ports. On the other hand, positional error is always present owing to the characteristics of GPS. Therefore, accident-risk detection algorithms must consider positional error. This paper proposes an methodology of calibration for falling object accident-risk-zone approach detection algorithm considering GPS errors. A probability density function was estimated, with positional error data collected from IoT devices as a probability variable. As a result of the verification, the algorithm showed a detection accuracy of 93% and 77%. Overall, the analysis results derived according to the GPS error level will be an important criterion for upgrading algorithms and real-time risk managements in the future.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.76-89
• /
• 2018

The distribution of the combined heat and power system is active as a solution to the instability of energy supply and environmental pollution caused by continuous industrial development. In Korea, the safety standards for combined heat and power system using a gas engine are insufficient therefore the study on this is needed. In this study, the safety performance and structural/material assessment items of domestic and international standards applied to the combined heat and power system were analyzed to carry out a standardization study on safety performance applicable to 20 kW gas engine combined heat and power system. In addition, the safety performance assessment (plan) of the gas engine combined heat and power system was derived by performing risk analysis and risk assessment using HAZOP. Assessment items include engine ignition systems related to safety performance, piping tight performance, watering and temperature rise performance, combustion performance, electrical efficiency, thermal efficiency, overall efficiency and humidity performance. Gas and water pipes, gas control and shut-off valves, durability, heat resistance, and cold resistance of metal or non-metallic materials related to the structure and materials of the gas engine combined heat and power systems.

• The Korean Journal of Emergency Medical Services
• /
• v.25 no.3
• /
• pp.163-178
• /
• 2021

Purpose: This study explored a plan for improving the overall preventive activity of Korean Citizen-Corps-Active-in-Disaster (CAIND). Methods: The study used the documentary survey and the technical approach methods. This way, detailed information regarding civil anti-disaster organizations was found in scholarly monographs, specialty publications, and master's/doctoral dissertations. It further utilized the statistical yearbooks between 2015 and 2018 from the Korean Ministry of Public Administration, Security, and Fire Service, and the National Statistical Office, to discover practical problems through a statistical analysis. Volunteer activities being inherent, related issues were reviewed at the same time to for purposes of clarifying the characteristics of disaster prevention activity by CAIND. Results: The study provided four major suggestions for improvement. First, the quota management system of Korean CAIND considering the characteristics of rural areas should be supplemented. Second, the education and training systems of Korean CAIND should be established to satisfy regional conditions. Third, management members' readership competency in operating organizations, including that of the Korean CAIND captain in charge, should be strengthened. Fourth, the reward system for Korean CAIND activities should be improved. Conclusion: In the future, the results of this study are expected to be utilized as a basic data to develop Korean CAIND.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.6
• /
• pp.226-237
• /
• 2021

Coastal safety accidents are characterized by a high proportion of human negligence and repeated occurrences of accidents caused by the same factors. The Korea Coast Guard prepares and implements various countermeasures to prevent accidents at coastal safety accident sites. However, there is a shortage of safety facilities and safety management personnel according to the limited budget. In addition, the ability to be proactively and proactively respond is low due to the limitations of the coastal safety accident risk forecasting system, which relies on the meteorological warning of the Korea Meteorological Administration. In this study, as part of preparing the foundation for establishing a preemptive and active coastal safety management system that can manage accident-causing factors, predict and evaluate risk, and implement response and mitigation measures after an accident occurs before coastal safety accidents occur. The establishment of a risk assessment system was proposed. The main evaluation factors and indicators for risk assessment were established through the analysis of the status of coastal safety accidents. The risk assessment methodology was applied to 40 major hazardous areas designated and managed by the Korea Coast Guard.

• Journal of the Korean Society of Safety
• /
• v.39 no.1
• /
• pp.41-54
• /
• 2024

Efforts to reduce on-site safety incidents have expanded, leading to active research in this domain. However, a systematic analysis to improve the utility of technology is lacking. In this study, we conducted a survey on the various institutional and technical improvement measures to promote the application of smart construction safety technology over three years after the implementation of the "Smart Safety Equipment Support Project." The results showed that financial constraint was the primary obstacle in the adoption of this innovation. Fostering a flexible environment in the utilization of management fees and financial support of projects was determined to aid in the extensive application of the technology. Ensuring cost efficiency and user-friendliness were principally necessary for technical enhancements in the smart construction safety technology. Technologies, such as VR/AR safety education, real-time location tracking, wearable devices, and innovation on streamlining safety-related work efficiency, had been anticipated to contribute to on-site safety. Operating a smart safety control center was expected to be beneficial in the systematic securing of data and reduction of safety blind spots. Effective methods had been suggested to overcome the barriers that hindered the development and application of smart construction safety technology. This study facilitates in the technological improvements in this field.