• 제목/요약/키워드: Active plate

검색결과 422건 처리시간 0.022초

Experimental Study of Adaptive Sliding Mode Control for Vibration of a Flexible Rectangular Plate

  • Yang, Jingyu;Liu, Zhiqi;Cui, Xuanming;Qu, Shiying;Wang, Chu;Lanwei, Zhou;Chen, Guoping
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제16권1호
    • /
    • pp.28-40
    • /
    • 2015
  • This paper aims to address the intelligent active vibration control problem of a flexible rectangular plate vibration involving parameter variation and external disturbance. An adaptive sliding mode (ASM) MIMO control strategy and smart piezoelectric materials are proposed as a solution, where the controller design can deal with problems of an external disturbance and parametric uncertainty in system. Compared with the current 'classical' control design, the proposed ASM MIMO control strategy design has two advantages. First, unlike existing classical control algorithms, where only low intelligence of the vibration control system is achieved, this paper shows that high intelligent of the vibration control system can be realized by the ASM MIMO control strategy and smart piezoelectric materials. Second, the system performance is improved due to two additional terms obtained in the active vibration control system. Detailed design principle and rigorous stability analysis are provided. Finally, experiments and simulations were used to verify the effectiveness of the proposed strategy using a hardware prototype based on NI instruments, a MATLAB/SIMULINK platform, and smart piezoelectric materials.

Studies on new antibiotics in Korea IV

  • Shim Je-Seop;Oh You-Jin;Yun Jeong-Ku;Han Seong-Soon
    • 한국응용곤충학회지
    • /
    • 제19권3호
    • /
    • pp.163-168
    • /
    • 1980
  • 본시험은 한국산항생물질 또는 항생균의 개발이용을 목적으로 한 기초연구로서 주로 전년도의 계속연구와 아울러 토양시료로부터 새로히 항생세균을 분리하였다. 청주부근의 토양시료 500점으로부터 83점의 항생균을 분리하였으며 이들은 주로 gram음성균인 Escherichia coli에 유효한 것을 선별하였다. 이들에 대한 연구는 앞으로 계속할 것이며 수년간 계속 연구중인 우수항생균 JS7501은 그동안 수차에 걸쳐 재선별하였기 때문에 JS901로 개칭하여 본시험에 공시하였으며 항균작용법 위도 재확인하였으며 주로 추출을 목적으로 용매추출, 흡착, TLC, 이온교환 수지 등을 총동원하였으나 TLC에 의하여 활성이 확인된 4 spot를 분리할 수 있었다. JS7901의 배양배지로서는 Soytone Sugar배지가 가장 높은 항균력을 보였으며 Soytone보다는 Sugar가 활성물질 증가와 관계가 있었다.

  • PDF

수동/능동적 방법을 혼용한 압전지능패널의 광대역 전달 소음저감성능 (Transmitted Noise Reduction of Piezoelectric Smart Panels using Passive/Active Method in Wide Range frequency)

  • 이중근;박우철
    • 한국산학기술학회논문지
    • /
    • 제2권2호
    • /
    • pp.73-79
    • /
    • 2001
  • 압전재료를 이용한 지능패널의 전달음 저감성능을 실험적으로 연구하였다. 제안된 압전지능패널은 압전 감지기와 작동기가 부착되어 있는 주구조물에 흡음재가 한 쪽면에 부착된 구조이다. 이는 저주파에서 능동적 방법과 고주파에서 수동적방법을 혼용한 개념이다. 이 개념을 증명하기 위하여 음향실험을 수행하였다. 음향실험을 위하여 음향터널을 설계, 제작하여 음향특성을 실험하였다. 음향 특성실험을 통하여 800 Hz가지 평면파특성을 나타내었다. 단일패널에 흡음재를 부착한 지능패널은 첫번째 공진주파수영역을 제외한 중주파수영역에서 뚜렸한 소음저감성능을 나타내었다. 첫번째 공진주파수에 대하여 반전회로를 이용한 능동제어를 수행하여 약 10 dB소음저감을 이루었다. 또한, 공기층을 갖는 이중지능패널에 대한 실험을 통하여 공진주파수에서 뿐만 아니라 넓은 영역에서 좋은 소음저감성능을 보였다. 수동적 방법과 능동적 방법을 혼용한 압전지능패널은 넓은 주파수 영역에서의 소온저감대책으로 유망한 기술이다.

  • PDF

반도체 생산에서 진동 제어를 위한 전자기 에어 스프링 (An Electro-magnetic Air Spring for Vibration Control in Semiconductor Manufacturing)

  • 김형태;김철호;이강원;이규섭;손성완
    • 한국소음진동공학회논문집
    • /
    • 제20권12호
    • /
    • pp.1128-1138
    • /
    • 2010
  • 정밀 방진에서 전형적인 문제로 고하중으로 인한 저주파 공진 특성이 있다. 전자기 에어 스프징은 진동 제어 장치이자 능동형 방진 장치이다. 이 연구에서 전자기 에어 스프링은 반도체 생산을 위한 저주파 공진을 제거하는 것을 목적으로 한다. 능동형 방진 장치로 기계 및 전가 부분은 2.5톤의 하 중에 작동되도록 설계하였다. 전자기 스프링은 탄성 공압 챔버 내에 공기압을 이용하여 띄우고, 전자기 된 시스템에 의하면 공진 주파수 영역에서 제어 시간 및 최고 피크가 상당히 줄어들었고, 그 결과 피동형 시스템 상의 고유 진동에 의해 발생되는 공진을 피할 수 있음을 보였다.

압전체를 이용한 평판 진동체의 $H_2$ 제어기 설계 ([ $H_2$ ] Controller Design of the Plate Vibration System using Piezoceramics)

  • 이재호;김준국;정준홍;박기헌
    • 전자공학회논문지SC
    • /
    • 제43권2호
    • /
    • pp.1-10
    • /
    • 2006
  • 본 논문에서는 압전세라믹 가진기와 검출기를 부착한 평판 진동 시스템을 구축하고 이를 효과적으로 제어하기 위한 $H_2$ 제어기 설계기법을 제시한다. 본 논문의 실험에서 사용한 평판 시스템은 2개의 입력과 2개의 출력이 있는 다변수 시스템이며 정확한 전달행렬을 구하기 위하여 시스템 식별 실험을 수행하였다. 시스템 식별로부터 얻어진 평판 진동 시스템의 상태 공간 모델을 이용하여 $H_2$ 제어기를 설계하고, 설계된 $H_2$ 제어기의 제어 성능은 시뮬레이션과 실제 실험을 통해 입증하였다.

요골골절에 사용된 금속판에 의한 장무지 굴곡건의 지연성 파열 (Delayed Rupture of Flexor Pollicis Longus by Plate for Fracture of the Distal Radius)

  • 황소민;안성민;오경석;김진형;이준호
    • Archives of Plastic Surgery
    • /
    • 제35권6호
    • /
    • pp.751-754
    • /
    • 2008
  • Purpose: Delayed rupture of flexor pollicis longus as a sequelae of the plate inserted for distal radius fracture is a very rare. This is the first case reported and published in Korea. Methods: A 48 years old female patient visited hospital, complaining flexor disturbance of interphalangeal joint of left thumb, which suddenly occurred without any external wound. We found that she had received operation of fixing plate for fracture of left distal radius 10 years ago. As operational opinion, we have checked that flexor pollicis longus tendon has been ruptured with oblique ways being stimulated by extended plate to palmar side over long period. Results: Authors performed tenorrhaphy of flexor pollicis longus without tendon graft and presented a successful active flexion of the left thumb interphalangeal joint 1 year after the operation. Conclusion: If the extruded part of the end plate is observed during the operation or follow-up, it is considered to be necessary to get rid of the plate as early as possible after the fracture healing.

한반도의 지진활동과 지각구조 (Comments on Seismicity and Crustal Structure of the Korean Peninsula)

  • 이기화
    • 지구물리와물리탐사
    • /
    • 제13권3호
    • /
    • pp.256-267
    • /
    • 2010
  • 한반도의 지진들은 주로 중생대에 반도에서 발생한 격렬한 지각변동으로 생성된 단층 및 깨어진 주요 지질구조의 경계에서 발생한다. 이 지진들은 Eurasian plate와 충돌하는 인접한 Indian plate와 Pacific plate 및 Philippine plate에 의한 E-W 내지 ENE-SSW 방향의 압축력장에서 반도 내의 주로 NNE-SSW 방향의 활성단층들이 깨어지며 발생하며 주향성분이 우세한 역단층의 메커니즘을 갖는다. 한반도의 지진활동은 지난 20세기 동안 15~18세기의 이례적으로 높은 기간을 제외하고는 비교적 낮거나 중간수준이며 이는 판내부 지진활동의 전형적인 불규칙한 양상을 보여준다. 한반도의 지각구조는 상부지각과 하부지각을 뚜렷하게 구분하는 Conrad 면이 없는 대체로 균질한 지각이며 수평적 불균질성은 존재한다. 지각의 평균 두께는 33 km 정도이며 Airy 형의 지각균형을 이루고 있어 산악지방이 평야지역에 비하여 지각의 두께가 더 크다. P파의 속도는 지표 부근에서 Moho 면까지 점진적으로 증가하며 평균은 대략 6.3 km/sec이다. 상부맨틀의 P파(Pn)의 속도는 대략 7.8 km/sec이다.

Treatment of Acute Acromioclavicular Joint Dislocation: Kirschner's Wire Trans-acromial Fixation versus AO Locking Hook Plate Fixation

  • Kim, Young-Jun;Chun, Yong-Min
    • Clinics in Shoulder and Elbow
    • /
    • 제19권3호
    • /
    • pp.149-154
    • /
    • 2016
  • Background: The purpose of this study is to compare clinical and radiological outcomes between trans-acromial fixation with Kirschner's wire (K-wire) and AO locking hook plate fixation for acute acromioclavicular (AC) joint dislocation. Methods: This study included 61 patients who underwent either closed reduction and trans-acromial fixation with K-wire (group A, 23 patients) or open reduction and internal fixation with AO locking hook plate (group B, 38 patients). Pain on a visual analogue scale (VAS) score, the University of California Los Angeles (UCLA) shoulder score, the American Shoulder and Elbow Surgeons (ASES) score, and active range of motion (ROM) were used in the functional evaluation. For radiological evaluation, coracoclavicular distance (CCD) was measured on both clavicular anteroposterior view and compared between groups. Results: At one-year follow-up, no significant differences in VAS pain score, UCLA shoulder score, ASES score, and active ROM were observed between groups, despite five cases (22.7%, 5/23) of complication in group A. The side-to-side difference between normal and affected CCD was $2.4{\pm}2.2mm$ in group A and $0.2{\pm}0.7mm$ in group B. This difference showed a statistical significance between groups (p<0.001). Conclusions: For the treatment of acute AC joint dislocation, the K-wire trans-acromial fixation group showed a significantly greater CCD than the AO locking hook plate group. In addition, during the follow-up period, much higher incidence of complication related to implant was observed in the trans-acromial fixation group. Although clinical outcomes between groups were not significantly different, these results should be interpreted carefully.

Development of Induction Heater Hot Water System using New Active Clamping Quasi Resonant ZVS PWM Inverter

  • Kwon, Soon-Kurl;Mun, Sang-Pil
    • 조명전기설비학회논문지
    • /
    • 제22권11호
    • /
    • pp.23-29
    • /
    • 2008
  • This paper presents a new conceptual electromagnetic induction eddy current based stainless steel plate spiral type heater for heat exchanger or dual packs heater in hot water system boiler steamer and super heated steamer, which is more suitable and acceptable for new generation consumer power applications. In addition, an active clamping quasi-resonant PWM high frequency inverter using trench gate IGBTs power module can operate under a principle of zero voltage soft commutation with PWM is developed and demonstrated for a high efficient induction heated hot water system and boiler in the consumer power applications. This consumer induction heater power appliance using active clamping soft switching PWM high frequency inverter is evaluated and discussed on the basis of experimental results.

Hardware Implementation of High-Speed Active Vibration Control System Based on DSP320C6713 Processor

  • Kim, Dong-Chan;Choi, Hyeung-Sik;Her, Jae-Gwan;You, Sam-Sang
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제32권3호
    • /
    • pp.437-445
    • /
    • 2008
  • This paper deals with the experimental assessment of the vibration suppression of the smart structures. First. we have presented a new high-speed active control system using the DSP320C6713 microprocessor. A peripheral system developed is composed of a data acquisition system, N/D and D/A converters, piezoelectric (PZT) actuator/sensors, and drivers for fast data processing. Next, we have tested the processing time of the peripheral devices, and provided the corresponding test results. Since fast data processing is very important in the active vibration control of the structures, we have focused on achieving the fast loop times of the control system. Finally, numerous experiments were carried out on the aluminum plate to validate the superior performance of the vibration control system at different control loop times.