• Preventive Nutrition and Food Science
• /
• v.7 no.2
• /
• pp.151-156
• /
• 2002

Antioxidant activity or green tea extracts (GTE) was evaluated in soybean oil (SBO), rice bran oil (RBO) and winterized rice bran oil (WRBO) stored at 63$^{\circ}C$ for 36 days. Lipid oxidation of the oils was determined using the active oxygen method (AOM), peroxide value (POV), change in unsaturated free fatty acid concentrations and by sensory evaluation. SBO had a higher concentration of the polyunsaturated fatty acids, linoleic and linolenic acid than RBO and WRBO. WRBO and RBO were more stable against lipid oxidation than SBO. Addition of GTE (200 ppm) to the stored oils, increased the induction period (IP) in AOM, reduced the increase in POV, and lessened the change in unsaturated fatty acids. Furthermore, GTE prevented the development of rancid flavors resulting from storage, all of which demonstrate the protective antioxidative activity of GTE. However, oil color became darker in the GTE treated oils. The antioxidant protection of GTE was most effective in RBO.

• Journal of Life Science
• /
• v.8 no.4
• /
• pp.353-359
• /
• 1998

This study was initiated to antioxidant activity of silybin on oxidation of human low density lipoproteins(LDL). Siltbin was extracted from Silybum marianum by the combination of fractionation and it was futher purified by silica gel column chromatography, and isolated active substances were identified silybin by IR, NMR and GC-MS. siltbin inhibited the ozidation of human low density lipoprotein(LDL) mediated by 5$^{\mu}$m CU $^{2+}$ ion in a dose dependent manner. LDL oxidation by congugated dines formation was completely inhibited by silybin at a concentration of 5$^{\mu}$M. The results provide a possibility that silybin might protect LDL against oxidation in atherosclerotic lessions.

• Corrosion Science and Technology
• /
• v.9 no.6
• /
• pp.281-288
• /
• 2010

This study examined the carbon corrosion at Pt/C interface in proton exchange membrane fuel cell environment. The Pt nano particles were electrodeposited on carbon substrate, and then the corrosion behavior of the carbon electrode was examined. The carbon electrodes with Pt nano electrodeposits exhibited the higher oxidation rate and lower oxidation overpotential compared with that of the electrode without Pt. This phenomenon was more active at $75^{\circ}C$ than $25^{\circ}C$. In addition, the current transients and the corresponding power spectral density (PSD) of the carbon electrodes with Pt nano electrodeposits were much higher than those of the electrode without Pt. The carbon corrosion at Pt/C interface was highly accelerated by Pt nano electrodeposits. Furthermore, the polarization and power density curves of PEMFC showed degradation in the performance due to a deterioration of cathode catalyst material and Pt dissolution.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.55-58
• /
• 1999

Nafion supported catalytic membranes were found to be active, stable and selective in th partial oxidation of propane to oxygenates with H2O2 under mild condition. Addition of Fe2+ in liquid phase enhances the reaction rate. Reaction proceeds according to a radical mechanism based on th electrophilic activation of propane on superacid sites and subsequent reaction of the activated paraffin with OH radicals. The use of a catalytic membrane, which allow separation of the intermediate products from the liquid phase containing the oxidant, was found to be effective to perform selective partial oxidation of propane with high yields to oxygenated products.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.280-280
• /
• 2013

In green plants, energy generation is accomplished through light-harvesting photosystem, which utilize abundant visible light and multi-stepwise redox reaction to oxidize water and reduce NADP+, transferring electrons efficiently with active cofactors1. Inspired by natural photosynthesis, artificial solar water-splitting devices are being designed variously. However, the several approaches involving immobilization2, conjugation3, and surface modification4 still have limitations. We have made artificial photosynthesis templates by self-assembling tyrosine-based peptide to mimick photosystem II. Porphyrin sensitizer absorbing blue light strongly was conjugated with the templates and they were hybridized with cobalt oxide through the reduction of cobalt ions in an aqueous solution. The formation of hybrid templates was characterized using TEM, and their water oxidation performance was measured by fluorescence oxygen probe. Our results suggest that the bio-templated assembly of functional compounds has a great potential for artificial photosynthesis.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.2
• /
• pp.81-84
• /
• 1988

The CO oxidation was performed on $H_2$-reduced NiO-${\alpha}-Fe_2O_3$ in the temperature range 150-$250^{\circ}C$. The kinetic study and the conductivity measurements indicate the oxidation reaction follows Langmuir-Rideal type process that is uncommon in heterogeneous catalyst$^1$. No active site is found on the catalyst surface for CO adsorption, but an oxygen vacancy adsorbs an oxygen, and this step is rate initiation. The partial orders are half for $O_2$ and first for CO, respectively. Apparent activation energy for over-all reaction is 9.05 kcal/mol.

• Korean Journal of Food Science and Technology
• /
• v.26 no.6
• /
• pp.655-658
• /
• 1994

This study was designed to investigate the suitability of oxidation matters and physico-chemical characteristics as a quality evaluation for the extent of rancidity development in fats and oils undergoing thermal oxidation. The results showed that acid value rapidly increased during heating time. Soybean oil, especially revealed a faster increase than palm oil and palm olein. Anisidine value and conjugated diene value also increased. Especially, soybean oil increased more rapidly than palm oil and palm olein. Active oxygen method stability was good in the ranks of palm oil, palm olein and soybean oil. Primary oxidation matter (POM) and secondary oxidation matter (SOM) were surveyed as an evaluation method for the extent of rancidity development in fats and oils. POM and SOM showed a sharp increase during the thermal oxidation period.

• Journal of Environmental Science International
• /
• v.23 no.5
• /
• pp.829-837
• /
• 2014

Titania-supported chromium oxides with different loadings have been embarked in catalytic oxidation of trichloroethylene (TCE) to inquire association of the formation of crystalline $Cr_2O_3$ with catalytic performances. A better activity in the oxidative TCE decomposition at chosen temperatures was represented when chromium oxides ($CrO_x$) had been dispersed on pure anatase-type $TiO_2$ (DT51D) rather than on phase-mixed and sulfur-contained ones such as P25 and DT51. The extent of TCE oxidation at temperatures below $350^{\circ}C$ was a strong function of $CrO_x$ content in $CrO_x$/DT51D $TiO_2$, and a noticeable point was that the catalyst has two optimal $CrO_x$ loadings in which the lowest $T_{50}$ and $T_{90}$ values were measured for the TCE oxidation. This behavior in the activity with respect to $CrO_x$ amounts could be associated with the formation of crystalline $Cr_2O_3$ on the support surface, that is less active for the oxidation reaction, and an easier mobility of the surface oxygen existing in noncrystalline $CrO_x$ species with higher oxidation states, such as $Cr_2O_8$ and $CrO_3$.

• Journal of the Korean Ceramic Society
• /
• v.35 no.1
• /
• pp.55-65
• /
• 1998

The oxidation behavior of Ag-36.8a%Cu-7.4at%Ti alloy brazed on Si3N4 substrate was investigated at 400, 500 and 600$^{\circ}C$ in air. Under this experimental condition Si3N4 and Ag were not oxidized whereas Cu and Ti among the brazing alloy components were oxidizied obeying the parabolic oxidation rate law. The activation energy of oxidation was found to be 80kj/ mol which was smaller than that of pure Cu owing to the presence of oxygen active element of Ti. The outer oxide scale formed from the initial oxidation state was always composed of Cu oxides which were known to be growing by the outward diffusion of Cu ions. As the oxidation progressed the concentration gradient occurred due to the continuous consumption of Cu as Cu oxides and consequently build-up of an Ag-enriched layer below the Cu oxides resulted in the formation of multiple oxide scales composed of Cu oxide (CuO) /Ag-enriched layer/Cu oxide (Cu2O) /Ag-enriched layer. Also the inward diffusing of oxygen through Cu oxide and Ag-enriched layers led to the formation of internal oxides of TiO2.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.236-241
• /
• 2008

The possibility of silicon oxidation through the aerial-diffusion of active oxygen species has been evaluated. The species originate from the surface of $TiO_2$ exposed by UV. Among process parameters such as UV intensity, substrate temperature and chamber pressure with oxygen, UV intensity was a major parameter to the influence on the oxide growth rate. When 1 kW high pressure Hg lamp was used as a UV source, the growth rate of silicon oxide was 8 times as faster as that of a 60 W BLB lamp. However, as the chamber pressure increased, the growth rate was declined due to the suppression of aerial diffusion of active oxygen species. According to the results, it could be confirmed that the aerial-diffusion of active oxygen species from UV-irradiated photocatalytic surface can be applied to a new method for preparing an ultra-thin silicon oxide at the range of relatively low temperature.