• Title/Summary/Keyword: Active Switch

Search Result 315, Processing Time 0.023 seconds

A Novel ZCS PWM Boost Converter with operating Dual Mode (Dual 모드로 동작하는 새로운 ZCS PWM Boost 컨버터)

  • 김태우;김학성
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.7 no.4
    • /
    • pp.346-352
    • /
    • 2002
  • A novel Zero Current Switching(ZCS) Pulse Width Modulation(PWM) boost converter with dual mode for reducing two rectifiers reverse recovery related losses is proposed. The switches of the proposed converter are operating to work alternatively turn-on and turn-off with soft switching condition In the every cycle and the proposed converter reduces the reverse recovery current, which is related switching losses and EMI problems, of the free-wheeling diode$(D_1, D_2)$ by adding the resonant inductor Lr, in series with the switch $S_1$. The switching components$(S_1, S_2, D, D_1)$ in the proposed boost converter are subjected to minimum voltage and current stresses same as those in their PWM counterparts because there are no additional active switches and resonant elements compared with the conventional ZVT PWM $converters^{[2]}$. The operation of the proposed converter, in this paper, is analyzed and to verify the feasibility of the characteristics is built and tested.

A novel all optical WDM output buffer (새로운 구조의 전광학적 WDM 출력 버퍼)

  • 곽용석;송용훈;전창훈;정제명;신서용
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.6A
    • /
    • pp.862-869
    • /
    • 2000
  • In a switch routing system, buffers are indispensible to prevent signal collision during routing process. For a photonic switching system, optical buffers are also indispensible if the system requires an active routing rather than a simple optical cross-connect(OXC). To cope with WDM technologies in optical comminication systems in these days, photonic switching system also has to deal with WDM signals. Therefore, optical buffers needed in a switching system has to be routed to the same output. For the receiver to recognize these signals separately, parallel WDM signals during rearrangement process. In this paper, we propose a novel all optical WDM output buffer whose structure, hardware, SNR and BER characteristics are improved a lot comparing with those of previously reported ones. From the analysis of the proposed buffer, the new buffer can hold 255 WDM cells keeping BER of 10-9 as long as a contrast ratio(gain on-off ratio) of optical gate(semiconductor optical amplifier) nside the buffer is 30dB.

  • PDF

Study on Adopting EDR Report for Traffic Accident Analysis (교통사고분석에서 EDR 기록정보의 채택에 관한 고찰)

  • Park, Jongjin;Park, Jeongman;Lee, Yeonsub
    • Journal of Auto-vehicle Safety Association
    • /
    • v.12 no.3
    • /
    • pp.52-60
    • /
    • 2020
  • Usage of EDR(Event Data Recorder) report for traffic accident analysis is currently increasing due to government regulation of EDR data release. Nevertheless, a lot of investigators simply adopt by comparing the number of ignition cycles(crash) at event to the number of ignition cycles(download) without an exact judgment whether event data occurred by this accident or not. In the EDR report, besides ignition cycles, there are many factors such as event record type, algorithm active(rear/rollover/side/frontal), time between events, event severity status(rollover/rear/right side/reft side/frontal), belt switch circuit status, driver/passenger pretensioner/air-bag deployment, PDOF(Principal Direction of Force) by ΔV to be able to decide whether or not to adopt. also the event data is considered enough to vehicle damaged state, accident situation at the scene of the accident. and there is described in "all data should be examined in conjunction with other available physical evidence from the vehicle and scene" in the CDR(Crash Data Retrieval) report. Therefore many investigators have to decide whether or not to adopt after they consider sufficiently to above factors when they are the traffic accident analysis and investigate the causes of a accident on the adopted event data. In this paper, we report to traffic accident investigators notable points and analysis methods on the basis of thousands of cases and the results of one's own experiment in NFS(National Forensic Service).

Reduction of Conducted Emission in Interleaved RPWM Buck Converter (인터리브드 RPWM Buck 컨버터의 전도성 노이즈 감소에 대한 연구)

  • Lee, Seunghyun;Lee, Keunbong;Nah, Wansoo
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.28 no.4
    • /
    • pp.298-308
    • /
    • 2017
  • This paper presents a Interleaved Buck Converter(IBC) system with Random PWM to reduce electromagnetic noise by harmonics. Swithced mode power supply generally controlled by high switching frequency have a electromagnetic interference(EMI) issue due to the high-voltage/high-current switching to regulate the voltage in buck converter. To solve the problem. we present a novel IBC system with PRBS. IBC system has two active switches with 180 phase difference that controll the cicuit with two PWM signal. IBC system may be disadventageous for the cost due to the addtion of one set of switch, but it has adventages of power distribution, current ripple cancellation, fast transient response, and passive component size reduction. To verify the validity of study, simulation program has been bulit using PSIM and the experimental results of IBC system using RPWM was compared with the conventinal PWM and randomized PWM.

A Design of 10 bit Current Output Type Digital-to-Analog Converter (10-비트 전류출력형 디지털-아날로그 변환기의 설계)

  • Gyoun Gi-Hyub;Kim Tae-Min;Shin Gun-Soon
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.9 no.5
    • /
    • pp.1073-1081
    • /
    • 2005
  • This paper describes a 3.3 V 10 bit CMOS digital-to-analog converter with a divided architecture of a 7 MSB and a 3 LSB, which uses an optimal Thermal-to-Binary Decoding method. Most of Dfh converters with hiか speed current drive are an architecture choosing current switch cell, column, row decoding method but this decoding circuit is complicated, occupies a large chip area. For these problems, this paper describes a D/A converter using an optimal Thermal-to-Binary Decoding method. The designed D/A converter with an active chip area of $0.953\;mm^2$ is fabricated by using a 0.35um process. The simulation data shows that the rise/fall time, settling time, and INL/DNL are 1.92/2.1 ns, 12.71 ns, and a less than ${\pm}2.3/{\pm}58$ LSB, respectively. The power dissipation of the D/A converter with a single power supply of 3.3 V is about 224 mW.

A Study of the Intelligent Connection of Intrusion prevention System against Hacker Attack (해커의 공격에 대한 지능적 연계 침입방지시스템의 연구)

  • Park Dea-Woo;Lim Seung-In
    • Journal of the Korea Society of Computer and Information
    • /
    • v.11 no.2 s.40
    • /
    • pp.351-360
    • /
    • 2006
  • Proposed security system attacks it, and detect it, and a filter generation, a business to be prompt of interception filtering dates at attack information public information. inner IPS to attack detour setting and a traffic band security, different connection security system, and be attack packet interceptions and service and port interception setting. Exchange new security rule and packet filtering for switch type implementation through dynamic reset memory by real time, and deal with a packet. The attack detection about DDoS, SQL Stammer, Bug bear, Opeserv worm etc. of the 2.5 Gbs which was an attack of a hacker consisted in network performance experiment by real time. Packet by attacks of a hacker was cut off, and ensured the normal inside and external network resources besides the packets which were normal by the results of active renewal.

  • PDF

Comparison of Clinical Development and Evaluation of Triple Antihypertensive Therapy in Advanced Foreign Countries (항고혈압 약물 3종 복합제에 대한 선진 외국의 임상자료 심사사례 비교)

  • Wang, So Young;Shon, Soo Jung;Um, Jung Yoon;Lim, Hwa Kyung;Lim, Sook;Kang, Seung Ho;Lee, Sun Hee
    • Korean Journal of Clinical Pharmacy
    • /
    • v.23 no.3
    • /
    • pp.239-247
    • /
    • 2013
  • Background: Fixed drug combinations are formulations containing two or more active ingredients in a single dosage form. Such combination therapies are commonly applied to improve efficacy, reduce adverse events and replace co-administration, etc. National and international guidelines for hypertension treatment recommend addition of other classes of antihypertensive drugs rather than incremental dose of mono-therapy, when blood pressure is not adequately controlled. Thus, many dual combinations of antihypertensive drugs have been approved and pharmaceutical companies are recently interested in developing antihypertensive triple combinations. Clinical trial designs for the fixed combinations are various depending on the target patients, dosage and clinical endpoints. Thereby, further discussions for the clinical trials of antihypertensive triple therapies are required regarding the indication claimed. Conclusion: This article provides a review for the assessment of the label and medical reports of the clinical trials on antihypertensive triple therapies in advanced foreign countries.

Three-Phase PWM Inverter and Rectifier with Two-Switch Auxiliary Resonant DC Link Snubber-Assisted

  • Nagai Shinichiro;Sato Shinji;Matsumoto Takayuki
    • Journal of Power Electronics
    • /
    • v.5 no.3
    • /
    • pp.233-239
    • /
    • 2005
  • In this paper, a new conceptual circuit configuration of a 3-phase voltage source, soft switching AC-DC-AC converter using an IGBT module, which has one ARCPL circuit and one ARDCL circuit, is presented. In actuality, the ARCPL circuit is applied in the 3-phase voltage source rectifier side, and the ARDCL circuit is in the inverter side. And more, each power semiconductor device has a novel clamp snubber circuit, which can save the power semiconductor device from voltage and current across each power device. The proposed soft switching circuits have only two active power semiconductor devices. These ARCPL and ARDCL circuits consist of fewer parts than the conventional soft switching circuit. Furthermore, the proposed 3-phase voltage source soft switching AC-DC-AC power conversion system needs no additional sensor for complete soft switching as compared with the conventional 3-phase voltage source AC-DC-AC power conversion system. In addition to this, these soft switching circuits operate only once in one sampling term. Therefore, the power conversion efficiency of the proposed AC-DC-AC converter system will get higher than a conventional soft switching converter system because of the reduced ARCPL and ARDCL circuit losses. The operation timing and terms for ARDCL and ARCPL circuits are calculated and controlled by the smoothing DC capacitor voltage and the output AC current. Using this control, the loss of the soft switching circuits are reduced owing to reduced resonant inductor current in ARCPL and ARDCL circuits as compared with the conventional controlled soft switching power conversion system. The operating performances of proposed soft switching AC-DC-AC converter treated here are evaluated on the basis of experimental results in a 50kVA setup in this paper. As a result of experiment on the 50kVA system, it was confirmed that the proposed circuit could reduce conduction noise below 10 MHz and improve the conversion efficiency from 88. 5% to 90.5%, when compared with the hard switching circuit.

Parallel Optimal Power Flow Using PC Clustering (PC 클러스터링을 이용한 병렬 최적조류계산에 관한 연구)

  • Kim, Cheol-Hong;Mun, Kyeong-Jun;Kim, Hyung-Su;Park, J.H.;Kim, Jin-Ho;Lee, Hwa-Seok
    • Proceedings of the KIEE Conference
    • /
    • 2004.11b
    • /
    • pp.190-193
    • /
    • 2004
  • Optimal Power Flow (OPF) is becoming more and more important in the deregulation environment of power pool and there is an urgent need of faster solution technique for on-line application. So this paper presents parallel genetic algorithm-tap search for the solution of the OPF. The control variables modeled unit active power outputs, generator-bus voltage magnitudes and transformer-tap settings. A number of functional operating constraints, such as branch flow limits, load bus boltage magnitude limits and generator reactive capabilities are included as penalties in the fitness function. In parallel GA-TS, GA operators are executed for each process. If best fitness of the GA is not changed for several generations, TS operators are executed for the upper three populations to enhance the local searching capabilities. With migration operation, best string of each node is transferred to the neighboring node after predetermined iterations are executed. For parallel computing, we developed a PC-cluster system consisting of 8 PCs. Each PC employs the 2 GHz Pentium IV CPU and is connected with others through ethernet switch based fast ethernet. To show the usefulness of the proposed method, developed algorithm has been tested and compared on an IEEE 30-bus system in the reference paper. From the simulation results, we can find that the proposed algorithm is efficient for the OPF.

  • PDF

Ginsenoside Rg3 attenuates skin disorders via down-regulation of MDM2/HIF1α signaling pathway

  • Han, Na-Ra;Ko, Seong-Gyu;Moon, Phil-Dong;Park, Hi-Joon
    • Journal of Ginseng Research
    • /
    • v.45 no.5
    • /
    • pp.610-616
    • /
    • 2021
  • Background: Thymic stromal lymphopoietin (TSLP) acts as a master switch for inflammatory responses. Ginsenoside Rg3 (Rg3) which is an active ingredient of Panax ginseng Meyer (Araliaceae) is known to possess various therapeutic effects. However, a modulatory effect of Rg3 on TSLP expression in the inflammatory responses remains poorly understood. Methods: We investigated antiinflammatory effects of Rg3 on an in vitro model using HMC-1 cells stimulated by PMA plus calcium ionophore (PMACI), as well as an in vivo model using PMA-induced mouse ear edema. TSLP and vascular endothelial growth factor (VEGF) levels were detected using enzyme-linked immunosorbent assay or real-time PCR analysis. Murine double minute 2 (MDM2) and hypoxia-inducible factor 1α (HIF1α) expression levels were detected using Western blot analysis. Results: Rg3 treatment restrained the production and mRNA expression levels of TSLP and VEGF in activated HMC-1 cells. Rg3 down-regulated the MDM2 expression level increased by PMACI stimulation. The HIF1α expression level was also reduced by Rg3 in activated HMC-1 cells. In addition, Rg3-administered mice showed the decreased redness and ear thickness in PMA-irritated ear edema. Rg3 inhibited the TSLP and VEGF levels in the serum and ear tissue homogenate. Moreover, the MDM2 and HIF1α expression levels in the ear tissue homogenate were suppressed by Rg3. Conclusion: Taken together, the current study identifies new mechanistic evidence about MDM2/HIF1α pathway in the antiinflammatory effect of Rg3, providing a new effective therapeutic strategy for the treatment of skin inflammatory diseases.