• 한국전문물리치료학회지
• /
• 제26권1호
• /
• pp.67-74
• /
• 2019

Background: Uncontrolled lumbopelvic movement leads to asymmetric symptoms and causes pain in the lumbar and pelvic regions. So many patients have uncontrolled lumbopelvic movement. Passive support devices are used for unstable lumbopelvic patient. So, we need to understand that influence of passive support on lumbopelvic stability. It is important to examine that using the pelvic belt on abdominal muscle activity, pelvic rotation and pelvic tilt. Objects: This study observed abdominal muscle activity, pelvic rotation and tilt angles were compared during active straight leg raise (ASLR) with and without pelvic compression belt. Methods: Sixteen healthy women were participated in this study. ASRL with and without pelvic compression belt was performed for 5 sec, until their leg touched the target bar that was set 20 cm above the base. Surface electromyography was recorded from rectus abdominis (RA), internal oblique abdominis (IO), and external oblique abdominis (EO) bilaterally. And pelvic rotation and tilt angles were measured by motion capture system. Results: There were significantly less activities of left EO (p=.042), right EO (p=.031), left IO (p=.039), right IO (p=.019), left RA (p=.044), and right RA (p=.042) and a greater right pelvic rotation angle (p=.008) and anterior pelvic tilt angle (p<.001) during ASLR with pelvic compression belt. Conclusion: These results showed that abdominal activity was reduced while the right pelvic rotation angle and anterior pelvic tilt angle were increased during ASLR with a pelvic compression belt. In other words, although pelvic compression belt could support abdominal muscle activity, it would be difficult to control pelvic movement. So pelvic belt would not be useful for controlled ASLR.

• Structural Engineering and Mechanics
• /
• 제83권3호
• /
• pp.293-304
• /
• 2022

In this work, a novel reliability approach for combined high and low cycle fatigue (CCF) estimation is developed by combining active learning strategy with least squares support vector machines (LS-SVM) (named as ALS-SVM) surrogate model to address the multi-resources uncertainties, including working loads, material properties and model itself. Initially, a new active learner function combining LS-SVM approach with Monte Carlo simulation (MCS) is presented to improve computational efficiency with fewer calls to the performance function. To consider the uncertainty of surrogate model at candidate sample points, the learning function employs k-fold cross validation method and introduces the predicted variance to sequentially select sampling. Following that, low cycle fatigue (LCF) loads and high cycle fatigue (HCF) loads are firstly estimated based on the training samples extracted from finite element (FE) simulations, and their simulated responses together with the sample points of model parameters in Coffin-Manson formula are selected as the MC samples to establish ALS-SVM model. In this analysis, the MC samples are substituted to predict the CCF reliability of turbine blades by using the built ALS-SVM model. Through the comparison of the two approaches, it is indicated that the reliability model by linear cumulative damage rule provides a non-conservative result compared with that by the proposed one. In addition, the results demonstrate that ALS-SVM is an effective analysis method holding high computational efficiency with small training samples to gain accurate fatigue reliability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2201-2202
• /
• 2006

In this paper, we designed high performance, high quality and high density switch mode power supply for precision electronics, and communication equipments. For this, we used two parallel DC-DC converters, which have opposite phases, to support proper high performance and high quality power. To reduce switching losses and make high switching frequency, active-clamp and ZVS technique were employed in each converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.569-570
• /
• 2006

In this paper, we designed high performance, high quality and high density switch mode power supply for precision electronics, and communication equipments. For this, we used two parallel DC-DC converters, which have opposite phases, to support proper high performance and high quality power. To reduce switching losses and make high switching frequency, active-clamp and ZVS technique were employed in each converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1235-1236
• /
• 2006

In this paper, we designed high performance, high quality and high density switch mode power supply for precision electronics, and communication equipments. For this, we used two parallel DC-DC converters, which have opposite phases, to support proper high performance and high quality power. To reduce switching losses and make high switching frequency, active-clamp and ZVS technique were employed in each converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1695-1696
• /
• 2006

In this paper, we designed high performance, high quality and high density switch mode power supply for precision electronics, and communication equipments. For this, we used two parallel DC-DC converters, which have opposite phases, to support proper high performance and high quality power. To reduce switching losses and make high switching frequency, active-clamp and ZVS technique were employed in each converter.

• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.726-739
• /
• 2013

피셔-트롭쉬 합성 반응은 촉매 표면에서 합성가스 (CO+$H_2$)를 탄화수소로 전환하는 반응이다. 코발트 또는 철계 촉매는 친환경적인 디젤 연료를 생산할 수 있고 합성가스의 전환율이 높은 촉매로 알려져 있다. 피셔-트롭쉬 반응에 사용되는 촉매의 활성은 촉매 표면에서의 활성점에 의존적이다. 활성점은 활성 물질의 크기, 담지량, 환원율, 지지체와 활성물질의 상호작용에 의해 결정된다. FT 촉매 제조 방법으로 활성물질의 크기를 조절하는 등의 새로운 방법들이 시도되고 있다. 여기에서는 촉매의 제조방법과 환원 특성을 비롯한 촉매의 형태와 반응 조건을 포함한 반응기 형태에 대해 알아보겠다.

• 멤브레인
• /
• 제23권6호
• /
• pp.425-431
• /
• 2013

본 연구의 목적은 지지체의 친수화가 압력지연삼투(Pressure retarded osmosis, PRO)막의 투과특성에 미치는 영향에 대해서 알아보고자 하였다. 소수성 지지체인 폴리에스테르를 친수성 고분자인 셀룰로오스 용액을 사용하여 친수화도를 조절하였다. 지지체의 친수화 특성만을 파악하기 위해서 지지층 없이 동일한 활성층을 사용하여 PRO 막 투과 특성을 비교하였다. 사용된 활성층은 1,4-dioxane과 cellulose tri-acetate (CTA, 13 wt%)를 사용하여 제조하였으며, $5kgf/cm^2$ 압력 하에서 행한 PRO 성능 평가의 경우 투과도가 친수화된 지지체를 사용한 경우와 친수화되지 않은 경우에 각각 $1.2L/m^2hr$와 $0.8L/m^2hr$로 친수화된 지지체를 사용할 경우 약 50% 투과량이 증가되는 특성을 보였다. 그러나 셀룰로오스 농도 변화에 따른 지지체의 친수화도 증가가 투과량 변화를 가져오지는 않았다. 이는 지지체를 친수화하기 위해 사용된 셀룰로오스의 농도가 증가함에 따라 지지체의 기공이 막히는 현상에 기인한 것으로 보인다. 이러한 결과를 통해 정삼투공정에서 투과유량을 높이기 위해서는 지지체로서 친수성 소재를 사용하여 분리막을 제조함과 동시에 지지체 기공을 유지하는 것이 중요함을 확인하였다.

• 한국산림과학회지
• /
• 제105권4호
• /
• pp.486-495
• /
• 2016

본 연구는 산주들을 대상으로 사유림 지원제도 이용 실태를 조사하여 지원제도의 현황과 문제점을 분석하여 개선방안을 제시하는데 도움이 되고자 수행하였다. 사유림 경영 지원제도의 인지도에 대해서는 독림가 57.8%, 임업후계자 47.6%인 반면 일반산주는 불과 17.6% 만이 인지하고 있는 것으로 나타났다. 지원경험도 인지도와 마찬가지로 독림가 79.2%, 임업후계자 58.6%인 반면 일반산주는 28.6%로 현저하게 낮은 비율을 보였다. 지원을 신청하기 못한 이유로는 '지원제도를 모름'에 대한 응답이 독림가, 임업후계자, 일반산주 각각 36.1%, 43.0%, 78.6%로 나타난 인지도분석 결과와 유사한 경향을 보였다. 반면 사유림 경영 지원에 대한 효과정도는 독림가와 임업후계자보다 일반산주가 높게 나타났으며, 전반적인 만족도 역시 독림가 28.5%, 임업후계자 36.8%, 일반산주 41.5%로 나타나 오히려 다소 지원횟수가 적은 일반산주에게서 경영전반에 대한 만족도가 높은 것으로 나타났다. 이에 따라 우리나라 산주의 대부분을 차지하는 일반산주의 적극적인 산림경영을 유도하기 위해서 사유림 지원제도의 인지도 개선이 필요하며, 지자체와 산림조합의 적극적인 홍보대책과 지원정책 마련이 필요할 것으로 보인다.

• 재활간호학회지
• /
• 제7권2호
• /
• pp.220-230
• /
• 2004

Purpose: The study has planned to find out the perceived social support of the families with pneumoconiosis patients. Method: The subjects of the study were the 300 family care givers of the pneumoconiosis patients who were hospitalized in Taeback, Donghae and Jeongsun Occupational Medical Center. The Social Support Survey Instrument developed by Park(1985) was adopted. Results: The Direct Perceived Supports showed statistically differences by the age(F=1.70 p=0.01) and the state of the disease(F=3.09 p=0.027) of the patients. The Health Situation Centered Support was different by the marietal situation(F=2.29 p=0.48) of the pneumoconiosis patients. The Indirect Perceived Supports were statistically different by sex(t=3.76 p=0.043) and relation with the patient (F=2.49 p=0.048), group joining(t=3.79 p=0.042) of the family care givers. The DPSs were statistically different by family income(F=2.25 p=0.025), family authority(F=2.81 p=0.031) and health insurance status(F=2.13 p=0.026). Recommendation: It is recommended to develop an active social support program at the pneumoconiosis care centers for the middle aged female family care givers of the pneumoconiosis patients with the support of Ministry of Labor, Ministry of Health and Welfare and other NGOs of pneumoconiosis.