• The Korean Journal of Pharmacology
• /
• v.10 no.2
• /
• pp.31-37
• /
• 1974

Citrus unshiu Marc., a family of Rutaceae, has been used as antitussives, antiemetics, expectorants, spasmolytics, stomachics and digestants in oriental medicine. But there is few reports on the pharmacological effects of Citrus unshiu pericarpium. Present experiment was performed to observe the effects of the water extract of Citrus unshiu on isolated auricle and intestine in rabbits and blood pressure in rats and also to study on the active component on the cardiovascular system by means of thin layer chlomatography and spectrophotometer. 1. The water extract showed positive inotropic and positive chronotropic effect in the concentration of $1{\times}10^{-4}g/ml$, $5{\times}10^{-4}g/ml$, and $1{\times}10^{-3}g/ml$. 2. The motility of isolated rabbit intestine was significantly depressed by the water extract. 3. The blood pressure was markedly increased by the water extract. 4. The blood vessel of rabbit ear was constricted by perfusion of the ether extract. 5. The purified alkaloid of Citri pericarpium by ion exchange resin showed the same Rf value with l-synephrine on thin layer chromatography. 6. The purified alkaloid of Citri pericarpium by thin layer chromatography showed the same absorption curve with l-synephrine in the ultraviolet scanning.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2015

This study was designed to determine the antioxidant activity of solvent fractions of broccoli sprouts grown by controlling the growing environment at the plant factory system. Fractionation was achieved with chloroform, n-hexane, ethyl acetate, butanol, water by 70% EtOH extract of the broccoli sprouts. Each solvent fraction was put through TLC and HPLC to separate active components. Higher antioxidant activities were observed for the butanol and ethyl acetate layers. Further evaluation of each of the 5 layers (LH1 to LH5) of the butanol fraction showed that the refined LH3 extract had a high antioxidant effect. Components with similar Rf values from TLC had the same retention times and peaks in the HPLC analysis. It was also determined that the sulforaphane content was high at the chloroform and butanol layers and the sulforaphane was responsible for, the high antioxidant activity. Thus, to use for functional materials, the butanol extract/layer of broccoli sprouts is recommended as the most effective.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.15.2-15.2
• /
• 2011

비휘발성 저항 메모리소자인 resistance random access memory (ReRAM)는 간단한 소자구조와 빠른 동작특성을 나타내며 고집적화에 유리하기 때문에 차세대 메모리소자로써 각광받고 있다. 현재, 이성분계 산화물, 페로브스카이트 산화물, 고체 전해질 물질, 유기재료 등을 응용한 저항 메모리소자에 대한 연구가 활발히 진행되고 있다. 그 중 ZnO를 기반으로 하는 amorphous InGaZnO (a-IGZO) 박막은 active layer 로써 박막트랜지스터 적용 시 우수한 전기적 특성을 나타내며, 빠른 동작특성과 높은 저항 변화율을 보이기 때문에 ReRAM 에 응용 가능한 재료로써 기대되고 있다. 또한 가시광선 영역에서 광학적으로 투명한 특성을 보이기 때문에 투명소자로서도 응용이 기대되고 있다. 본 연구에서는 indium tin oxide (ITO) 투명 전극을 적용한 ITO/a-IGZO/ITO 구조의 투명 소자를 제작하여 저항 메모리 특성을 평가하였다. Radio frequency (RF) sputter를 이용하여 IGZO 박막을 합성하고, ITO 전극을 증착하여 투명 저항 메모리소자를 구현하였고, resistive switching 효과를 관찰하였다. 또한, 열처리를 통해 a-IGZO 박막 내의 Oxygen vacancy와 같은 결함의 정도에 따른 on/off 저항의 변화를 관찰할 수 있었다. 제작된 저항 메모리소자는 unipolar resistive switching 특성을 보였으며, 높은 on/off 저항의 차이를 유지하였다. Scanning electron microscope (SEM)을 통해 합성된 박막의 형태를 평가하였고, X-ray diffraction (XRD) 및 transmission electron microscopy (TEM)을 통해 결정성을 평가하였다. 제작된 소자의 전기적 특성은 HP-4145 를 이용하여 측정하고 비교 분석하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.9
• /
• pp.685-690
• /
• 2010

ZnO with the wide band gap near 3.37 eV is typically an n-type semiconductor in which deviation from stoichiometry is electrically active. It was known that the films with a resistivity of the order of $10^{-4}{\Omega}cm$ is not easy to obtain. In order to improve electrical characteristic of ZnO, we added 1, 3, 5 wt% Ga element in ZnO. The Ga-doped ZnO (GZO) was grown on a glass substrate by radio frequency (RF) magnetron sputtering at the temperature range from 100 to $500^{\circ}C$. X-ray diffraction (XRD) patterns of GZO films showed preferable crystal orientation of (002) plane. The lowest resistivity of the GZO films was $8.9{\times}10^{-4}{\Omega}cm$. GZO films significantly influenced by the working temperature. The average transmittance of the films was over 80% in the visible ranges.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.6
• /
• pp.817-823
• /
• 2011

This paper introduces an efficient voltage multiplier circuit for improved voltage gain and power efficiency of radio frequency identification (RFID) tags. The multiplier is fully integratable and takes advantage of both passive and active circuits to reduce the required input power while yielding the desired DC voltage. A six-stage voltage multiplier and an ultralow power voltage regulator are designed in a 0.13 ${\mu}m$ complementary metal-oxide semiconductor process for 2.45 GHz RFID applications. The minimum required input power for a 1.2 V supply voltage in the case of a 50 ${\Omega}$ antenna is -20.45 dBm. The efficiency is 15.95% for a 1 $M{\Omega}$ load. The regulator consumes 129 nW DC power and maintains the reference voltage in a 1.1% range with $V_{dd}$ varying from 0.8 to 2 V. The power supply noise rejection of the regulator is 42 dB near a 2.45 GHz frequency and performs better than -32 dB from 100 Hz to 10 GHz frequencies.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2006.06a
• /
• pp.715-718
• /
• 2006

e-seal은 RFID 기술을 사용하여 원격에서 자동으로 봉인상태를 확인할 수 있는 컨테이너 봉인 장치를 말한다. RFID의 특징상 반도체 칩에 기록된 정보를 제 삼자가 쉽게 판독 및 변조할 수 있다는 취약점이 있는 실정이다. ISO에서는 RFID의 취약점을 보안하기 위한 표준작업(ISO 18185)을 진행 중이다. 이 중, ISO 18185-4는 e-seal에 저장되는 자료나 리더와의 RF통신에서 데이터 보호를 위한 표준이며, 관련된 연구로는 Active-RFID 인증 프로토콜과 ISO 18185-4를 위한 보고서로 제출된 보안 프로토콜 등이 있다. 제안된 e-seal 보안 프로토콜을 적용하기 위해서는 e-seal과 리더 간의 데이터를 암/복호화 키를 Pseudorandom Function(PRF)을 이용하여 마스터 키로부터 MTK(Mutual Transient Key)를 유도하고, MTK를 암/복호화 키로 사용해야 할 필요가 있다. 본 논문에서는 현재 보안 프로토콜에서 사용되고 있는 PRF에 대해 살펴보고, e-seal 환경에서 PRF를 소프트웨어로 구현하였다. 구현 결과 해시 함수를 기반으로 하는 PFR보다 암호화 알고리즘 AES를 기반으로 하는 PRF이 더 좋은 성능을 보였으며, 블록 암호화 알고리즘인 AES-128을 어셈블리어로 구현함으로써 PRF를 최적화하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.285-290
• /
• 2006

In a Vehicle, Safety is the most important factor for drivers. It is well known that tire pressure lower than normal reduces the safety of the vehicle. In a consideration of active safety, tire pressure monitoring system is absolutely required. Tire pressure monitoring using in-tire pressure sensors with an RE data link have proven to be best approach to measuring tire pressure over the widest range of operating conditions. In this paper, we describe the parameters of TPMS, the characteristic of tire pressure and temperature compensation. These are the main factors to design the decision logic. We will show the guidelines for TPMS logic development considering environment variables and vehicle conditions.

• Journal of Sensor Science and Technology
• /
• v.23 no.5
• /
• pp.291-294
• /
• 2014

In this study, a chemiresistive sensor based on one-dimensional $WO_3$ nanostructures is presented for application in non-invasive medical diagnostics. $WO_3$ nanostructures were used as an active gas sensing layer and were deposited onto a $SiO_2/Si$substrate using Pt interdigitated electrodes (IDEs). The IDE spacing was $5{\mu}m$ and deposition was performed using RF sputter with glancing angle deposition mode. Pt IDEs fabricated by photolithography and dry etching. In comparison with thin film sensor, sensing performance of nanostructure sensor showed an enhanced response of more than 20 times when exposed to 50 ppm acetone at $400^{\circ}C$. Such a remarkable faster response can pave the way for a new generation of exhaled breath analyzers based on chemiresistive sensors which are less expensive, more reliable, and less complicated to be manufactured. Moreover, presented sensor technology has the potential of being used as a personalized medical diagnostics tool in the near future.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.808-815
• /
• 2007

유비쿼터스 컴퓨팅에 대한 관심이 높아지면서, 위치인식기술의 중요성이 대두 되고 있다. 기존에 많이 이용되어 왔던 위치인식기술에는 인공위성을 이용한 GPS, 초음파를 이용한 Cricket, 적외선을 이용한 Active Badge, RF를 이용한 RFDAR등이 있다. 하지만 이러한 기술들은 시스템을 위해 기반 시설을 전제 조건으로 하기 때문에 이용에 어려움이 따른다. 기존의 위치인식기술의 단점을 보안하기 위한 방법으로 제시된 것이 GSM과 무선 LAN을 이용한 위치인식기술들이다. 현재는 차량용 네비게이션, 물류시스템의 상품 운반 현황 추적 등 위치인식기술을 바탕으로 한 다양한 서비스들이 상용화되어 가고 있다. 상용화된 서비스들의 특성에 따라 개인화된 위치 정보를 필요로 하는 것들이 많아 지고 있으며, 개인화된 정보를 획득하고 이를 서비스에 적용하려는 시도가 여러 곳에서 진행 중이다. 개인화된 정보를 얻기 위해서는 사람이 이해하고 사용할 수 있는 장소라는 개념을 확보해야 하며, 인공지능적인 기술들을 필요로 하게 된다. 본 논문에서는 기반시설(AP: Access Point)이 충분한 무선 LAN을 이용하여 위치인식 기술애 대해 연구하였다. 기존의 무선 LAN 장비를 통하여 얻어진 위치 데이터를 가공하여 검색 기술의 고전적인 방법인 벡터 유사도와 확률 기반 유사도를 적용하여 인식률의 추이를 실험해 보고, 인식률 증가를 위한 방법들을 모색해 보겠다. 또 위치기반 알리미를 통하여 개인화 정보에 대한 적용 방향에 대해 연구해 보고자 한다.

• Journal of information and communication convergence engineering
• /
• v.5 no.4
• /
• pp.382-388
• /
• 2007

Indoor location system using wireless sensor network technology was applied for the status evaluation and activity monitoring of elderly person or chronic invalid at home. Location awareness application is transparent to the daily activities, while providing the embedded computing infrastructure with an awareness of what is happening in this space. To locate an object, the active ceiling-mounted reference beacons were placed throughout the building. Reference beacons periodically publish location information on RF and ultrasonic signals to allow application running on mobile or static nodes to study and determine their physical location. Once object-carried passive listener receives the information, it subsequently determines it's location from reference beacons. By using only the sensor nodes without any external network infrastructure the cost of the system was reduced while the accuracy in our experiments. was fairly good and fine grained between 7 and 15 cm for location awareness in indoor environments. Passive architecture used here provides the security of the user privacy while at the server the privacy was secured by providing the authentication using Geopriv approach. This information from sensor nodes is further forwarded to base station where further computation is performed to determine the current position of object and several applications are enabled for context awareness.