• 한국생활과학회지
• /
• 제15권3호
• /
• pp.449-455
• /
• 2006

We researched the comfort degree of 8 bodily parts while high school students carry out 9 different motions common to them. We observed high school students to study active effection when they are wearing Saenghwal Hanboks as a school uniform. As a result of this study, the highest degrees of comfort were recorded at standing position, walking, and upright sitting position with one's waist keeping 90 degree. On the other hand, the lowest degrees of comfort were experienced when they bend forward 45 degree and 90 degree each, and also when arms were folded across the chest. Furthermore, students reported that their buttocks, waist, and knees were comfortable during observation period, but that their backs, shoulders, and arm hole were uncomfortable throughout. In general, girls felt more comfortable than boys did, while they were wearing Saenghwal Hanbok as a school uniform.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권2호
• /
• pp.89-96
• /
• 1999

This paper proposes a common-mode voltage reduction method base on SVPWM(Space-Vector Pulsewidth Modulation) in three phase PWM converter/inverter system. By shifting the active voltage vector of inverter and aligning this to the active vector of converter, it is possible to eliminate a common-mode voltage pulse in one control period. Since the proposed PWM method maintains the active voltage vector, it does not affect the control performance of PWM converter/inverter system. Without any extra hardware, overall common mode voltage dv/dt and conrresponding leakage current can be reduced to two-third of the conventional three phase symmetric SVPWM scheme.

• 동력기계공학회지
• /
• 제6권2호
• /
• pp.82-87
• /
• 2002

For the dynamic behavior evaluation of a semi-active vibration control system, it is very important to use an accurate mathematical model for the hydraulic damper applied to the control system. In this study, a mathematical model for a symmetric type hydraulic damper was suggested. In this model, the effects of gas volume and oil temperature variation on the bulk modulus of oil were considered. The dynamic behavior of the damper was investigated by experiments and simulations. It was confirmed that the pressure variation, damping force, and mean pressure variation could be estimated with comparatively good precision by the suggested mathematical model. Moreover, it was shown that excessive pressure rise can be generated by the oil expansion due to the heat energy transformed from the exciting energy of the damper for a short period of the damper operation.

• Journal of Communications and Networks
• /
• 제11권4호
• /
• pp.406-415
• /
• 2009

In this work, we consider performance modeling of a wireless sensor network with a time division multiple access (TDMA) media access protocol with slot reuse. It is assumed that all the nodes are peers of each other and they have two modes of operation, active and sleep modes. We model the sensor network as a Jackson network with unreliable nodes with on and off states. Active and sleep modes of sensor nodes are modeled with on and off states of unreliable nodes. We determine the joint distribution of the sensor node queue lengths in the network. From this result, we derive the probability distribution of the number of active nodes and blocking probability of node activation. Then, we present the mean packet delay, average sleep period of a node and the network throughput. We present numerical results as well as simulation results to verify the analysis. Finally, we discuss how the derived results may be used in the design of sensor networks.

• 아시안잔디학회지
• /
• 제12권1호
• /
• pp.17-22
• /
• 1998

This experiment was conducted to investigate the active composting process with wastes from agricultural products. This was decomposed by active composting process for 28 days. Temperature of active airation period was maintained at 60~68C˚ for 6 days, and then 55˚C ~40˚C for 11 days. After turnover, composting temperture raised to 55~58˚C for 5 days and was maintained at air temperature condition from 6 days. Add then, compost was stabilized in the non-aerated depository for 2 months. The C/N ratios of these compests were 18.5,19.7 and 18.5 on the depths which were 5 cm, 10 cm and 20 cm, respectively. The pH of compest was changed from 6.5 to 7.2. Key words: Agricultural products, Wastes, C /N ratios.

• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.723-730
• /
• 2012

This paper presents a new ZVS single phase bridgeless (Power Factor Correction) PFC, using an active clamp to achieve zero-voltage-switching for all main switches and diodes. Since the presented PFC uses a bridgeless rectifier, most of the time, only two semiconductor components are in the main current path, instead of three in conventional single-switch configurations. This property significantly reduces the conduction losses,. Moreover, zero voltage switching removes switching loss of all main switches and diodes. Also, auxiliary switch turns on zero current condition. The presented converter needs just a simple non-isolated gate drive circuitry to drive all switches. The eight stages of each switching period and the design considerations and a control strategy are explained. Finally, the converter operation is verified by simulation and experimental results.

• Animal cells and systems
• /
• 제5권1호
• /
• pp.37-44
• /
• 2001

Gonadal development, reproductive cycle, gonad index, meat weight rate, and first sexual maturity of the top shell, Omphalius rusticus were Investigated monthly by histological observations. Specimens were collected from the west coast of Korea during the period from January to December in 1999. O. rusticus is dioecious and oviparous. The gonad is widely situated on the surface of the digestive g1and located in the posterior spiral meat part in the shell. The ovary and the testis were composed of a number of oogenic follicles and several spermatogenic follicles, respectively. Ripe oocytes were approximately 120-130 $\mu$m in diameter. The meat weight rate peaked in June (27.7%), and then rapidly decreased in September (19.5%). Monthly changes in the gonad index in both sexes reached the maximum in June, and then sharply decreased in September. Percentages of first sexual maturity of female and male snails ranging from 9.0 to 9.9 mm in shell heights were 58.3% and 54.5%, respectively, and 100% in those over 11.0 mm in both sexes participated in reproduction. Reproductive cycle of this species can be categorized into five successive stages: in females, early active (October to April), late active (December to June), ripe (April to September), spawning (July to September) and recovery (September to January): in males, early active (November to March), late active (December to June), ripe (April to September), spawning (July to September) and recovery (September to December). Gonadal development, gametogenesis, reproductive cycle, and spawning were closely related to the seawater temperature.

• 천문학회지
• /
• 제42권1호
• /
• pp.9-15
• /
• 2009

A necessary condition for the formation of a filament is magnetic helicity. In the present paper we seek the origin of magnetic helicity of intermediate filaments. We observed the formation of a sinistral filament at the boundary of a decaying active region using full-disk $H_{\alpha}$ images obtained from Bi Bear Solar Observatory. We have measured the rate of helicity injection during the formation of the filament using full-disk 96 minute-cadence magnetograms taken by SOHO MDI. As a result we found that 1) no significant helicity was injected around the region (polarity inversion line; PIL) of filament formation and 2) negative helicity was injected in the decaying active region. The negative sign of the injected helicity was opposite to that of the filament helicity. On the other hand, at earlier times when the associated active region emerged and grew, positive helicity was intensively injected. Our results suggest that the magnetic helicity of the intermediate filament may have originated from the helicity accumulated during the period of the growth of its associated active region.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.59-63
• /
• 2011

Friction damping is one of the attractive vibration control technique for space structures due to its simplicity and large damping capacity. However, passive approaches for friction damping have a limitation because energy is no longer dissipated at sticking. In order to overcome this problem, semi-active control methods to adjust normal force at frictional interface have been studied in previous researches. In this paper, two semi-active friction control method is compared by simulating SDOF model of truss structure. The first approach is on-off control to maximize rate of energy dissipation, whereas the second concept is variable friction force control to minimize amplitude ratio for each half period. The maximum friction force, control variable in on-off control method, is obtained to minimize 1% settling time, and is different from optimal friction force in passive control. Simulation results show that performance of on-off control is better than that of variable friction force control in terms of settling time and controlled friction force.

• Smart Structures and Systems
• /
• 제21권3호
• /
• pp.373-387
• /
• 2018

Semi-active isolation systems based on leverage-type stiffness control strategies have been widely studied. The main concept behind this type of system is to adjust the stiffness in the isolator to match the fundamental period of the isolated system by using a simple leverage mechanism. Although this system achieves high performance under far-field earthquakes, it is unsuitable for near-fault strong ground motion. To overcome this problem, this study considers the potential energy effect in the control law of the semi-active isolation system. The minimal energy weighting (MEW) between the potential energy and kinetic energy was first optimized through a series of numerical simulations. Two MEW algorithms, namely generic and near-fault MEW control, were then developed to efficiently reduce the structural displacement responses. To demonstrate the performance of the proposed method, a two-degree-of-freedom structure was employed as a benchmark. Numerical results indicate that the dynamic response of the structure can be effectively dampened by the proposed MEW control under both far-field and near-fault earthquakes, whereas the structural responses resulting from conventional control methods may be greater than those for the purely passive control method. Moreover, according to experimental verifications, both the generic and near-fault MEW control modes yielded promising results under impulse-like earthquakes. The practicability of the proposed control algorithm was verified.