• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.159-167
• /
• 2000

The polymethylene-bridged dinuclear half-titanocenes [(CH$_2$)$_{n}$(C$_{5}$ H$_4$)$_2$][TiCl$_3$]$_2$ (n=5(10), 7(11), 9(12)) have been synthesized by treating the distannylated derivatives of the ligands with two equivalents of TiCl$_4$ in toluene. All complexes are characterized by IR, $^1$H NMR, $^{13}$ C NMR and mass spectrometry. In order to examine the catalytic properties of the dinuclear complexes styrene polymerization has been conducted in the presence of MMAO. From the polymerization experiments it was found that ( i ) all the prepared complexes 10-12 produced syndiotactic polystyrenes, ( ii ) the complex 12 holding the longest bridging ligand exhibited the highest activity but produced a polymer having the smallest molecular weight among the polymethylene-bridged dinuclear half-titanocenes. This behavior was attributed to the influence of electron-donating caused by the polymethylene bridge between two active centers as well as the effect of steric congestion around metal center caused by the proximal distance between two active sites.s.

• Journal of the Korean Vacuum Society
• /
• v.20 no.4
• /
• pp.288-293
• /
• 2011

We investigated the effects of piezoelectric field on the electro-absorption characteristics in InGaN/GaN multiple-quantum well (MQW) green light emitting diodes (LED). Double crystal X-ray diffraction measurement was performed to study the crystalline property and indium (In) composition in the MQW active layer. To measure the electro-luminescence and electro-reflectance (ER) spectroscopy, we fabricated the $1{\times}1\;mm^2$ large-area green LED chip. The piezoelectric field inside the LED structure was evaluated from the Vcomp in active layer by the ER spectra. Finally, we analyzed the electro-absorption characteristics of the green LED by using the photo-current spectroscopy.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.368-376
• /
• 2020

In this study, an analysis on the reaction characteristics of a catalyst using platinum (Pt) as an active oxidation metal catalyst for controlling SO₂ was performed. Pt/TiO₂ catalyst was prepared by using Pt as various precursor forms on a titania (TiO₂) support, and used for the experiment. There was no difference in performance of SO₂ oxidation according to Pt valence states such as Pt²⁺ or Pt⁴⁺ on Pt/TiO₂, and Pt chloride species such as PtCl_x reduces SO₂ oxidation performance. In addition, as a result of analyzing the valence state of the catalyst before and after the SO₂ oxidation reaction by XPS analysis, a decrease in lattice oxygen and an increase in surface chemisorbed oxygen after the SO₂ oxidation reaction were confirmed. Therefore it can be suggested that the oxidation reaction of SO₂ when using the Pt/TiO₂ catalyst is the major one following the Mar-Van Krevelen mechanism where the reaction of lattice oxygen corresponding to PtOx and the oxidation-reduction reaction by oxygen vacancy occur. Overall, it can be confirmed that the oxygen species of PtOx (Pt²⁺ or Pt⁴⁺) present on the catalyst acts as a major active site.

• Journal of Life Science
• /
• v.11 no.6
• /
• pp.561-567
• /
• 2001

To isolate and purify fibrinolytic active substance from Sarcodon aspratus(N $H_4$)$_2$S $O_4$ precipitation, DE52 anion exchange column chromatography, Sephacryl-S 200gel filtration chromatography and Mono S cation FPLC were carried out and the characterizations of the purified enzyme were investigated. The bound active fraction on DE52 anion exchange column chromatography were eluted with 0.2 M NaCI and the fibrionlytic enzyme was purified after following Sephacryl-S200 gel fitration chromatography and Mono S cation EPLC. The specific activity of purified enzyme was 55.2 U/mg protein and increased 11.3 fold comparing crude extract and the yield was 49.5%. 12% SDS-PAGE electrophoresis and gel filtration chromatography revealed that Sarcodon aspratus fibrionloytic enzyme was highly purified and had 29.300 Da molecular weight. Enzyme activity of the purified fibrinolytic enzyme from Sarcodon aspratus was increased on higher pH and was stable until pH 10.5. On temperature dependent stability, the enzyme activity was decrease sharply but remained 25% relative activity on 8$0^{\circ}C$. This enzyme activity was inhibited by heavy metal ion, C $U^{2+}$ and $Co^{3+}$ with 68% and 38%, respectively. And also, the enzyme activity was inhibited with $Ca^{2+}$ chelator EDTA and serine protease inhibitor PMSF. These results from this study suggested that the fibrinolycit enzyme from Sarcodon aspratus is a serine protease and the enzyme activity was increased by $Ca^{2+}$ or $Mg^{2+}$ ion.n.ion.n.

• Membrane Journal
• /
• v.28 no.3
• /
• pp.157-168
• /
• 2018

Potassium tannate (TA-K), which is prepared by base treatment of the bio-renewable tannic acid (TA), was evaluated for its potential application as a draw solute for water purification by forward osmosis. The forward osmosis and recovery properties of TA-K were systematically investigated. In the application of forward osmosis through the active layer facing feed solution (AL-FS) method, the water flux of TA-K draw solution was significantly higher than that of the TA draw solution, while that of the latter was not identified. At a low concentration of 100 mM, the osmotic pressure (1,135 mOsmol/kg) of the TA-K draw solution was approximately 6.5 times that (173 mOsmol/kg) of the NaCl draw solution. Furthermore, the water flux and specific salt flux (6.14 LMH, 1.26 g/L) of the TA-K draw solution at 100 mM were approximately 2.5 and 0.5 times those of the NaCl draw solution (2.46 LMH, 2.63 g/L) at the same concentration, respectively. For reuse, TA-K was precipitated by using a metal ion and recovered through membrane filtration. This study demonstrates the applicability of a phytochemical material as a draw solute for forward osmosis.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.451-457
• /
• 2006

We synthesized phase pure CrN having surface areas up to $47m^2/g$ starting from $CrCl_{3}$ with $NH_{3}$. Thermal Gravimetric Analysis coupled with X-ray diffraction was carried out to identify solid state transition temperatures and the phase after each transition. In addition, the BET surface areas, pore size distributions, and crystalline diameters for the synthesized materials were analyzed. Space velocity influenced a little to the surface areas of the prepared materials, while heating rate did not. We believe it is due to the fast removal of reaction by-products from the system. Temperature programmed reduction results revealed that the CrN was hardly passivated by 1% $O_{2}$. Molecular nitrogen was detected from CrN at 700 and $950^{\circ}C$, which may be from lattice nitrogen. In temperature programmed oxidation with heating rate of 10 K/min in flowing air, oxidation started at or higher than $300^{\circ}C$ and resulting $Cr_{2}O_{3}$ phase was observed with XRD at around $800^{\circ}C$. However the oxidation was not completed even at $900^{\circ}C$. CrN catalysts were highly active for n-butane dehydrogenation reaction. Their activity is even higher than that of a commercial $Pt-Sn/Al_{2}O_{3}$ dehydrogenation catalyst in terms of volumetric reaction rate. However, CrN was not active in pyridine hydrodenitrogenation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03a
• /
• pp.16-16
• /
• 2010

GaN-based light-emitting diodes (LEDs) are attracting great interest as candidates for next-generation solid-state lighting, because of their long lifetime, small size, high efficacy, and low energy consumption. However, for general illumination applications, the external quantum efficiency of LEDs, determined by the internal quantum efficiency (IQE) and the light extraction efficiency, must be further increased. The IQE is determined by crystal quality and epitaxial layer structure and high value of IQE more than 70% for blue LEDs have been already reported. However, there is much room for improvement of light extraction efficiency because most of the generated photons from active layer remain inside LEDs by total internal reflection at the interface of semiconductor with air due to the high refractive index difference between LEDs epilayer (for GaN, n=2.5) and air (n=1). The light confining in LEDs will be reabsorbed by the metal electrode or active layer, reducing the efficacy of LEDs. Here, we present the first demonstration of enhanced light extraction by forming a MgO nano-pyramids structure on the surface of vertical-LEDs. The MgO nano-pyramids structure was successfully fabricated at room temperature using conventional electron-beam evaporation without any additional process. The nano-sized pyramids of MgO are formed on the surface during growth due to anisotropic characteristics between (111) and (200) plane of MgO. The ZnO layer with quarter-wavelength in thickness is inserted between GaN and MgO layers to increase the critical angle for total internal reflection, because the refractive index of ZnO (n=1.94) could be matched between GaN (n=2.5) and MgO (n=1.73). The MgO nano-pyramids structure and ZnO refractive-index modulation layer enhanced the light extraction efficiency ofV-LEDs with by 49%, comparing with the V-LEDs with a flat n-GaN surface. The angular-dependent emission intensity shows the enhanced light extraction through the side walls of V-LEDs as well as through the top surface of the n-GaN, because of the increase in critical angle for total internal reflection as well as light scattering at the MgO nano-pyramids surface.

• Resources Recycling
• /
• v.24 no.6
• /
• pp.9-16
• /
• 2015

In a recycling scheme of spent lithium ion batteries, a co-precipitation process for the re-synthesis of precursor is essential after the leaching of lithium ion battery scraps. In this study, the effect of ammonia as impurity during the co-precipitation process was investigated in order to re-synthesize a precursor of Ni-rich cathode active material $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ (NCM 622). As ammonia concentration increases from 1 M (the optimum condition for synthesis of the precursors based on 2 M of metal salt solution) to 4 M, the composition of obtained precursors deviates from the designed composition, most notably for Ni. The Ni co-precipitation efficiency gradually decreases from 100% to 87% when the concentration of ammonia solution increases from 1 M to 4 M. Meanwhile, the morphological properties of the obtained precursors such as sphericity, homogeneity and size distribution of particles were also investigated.

• Journal of Life Science
• /
• v.23 no.12
• /
• pp.1486-1494
• /
• 2013

A high protease-producing strain was isolated and identified from the digestive tract of octopus vulgaris by detecting a hydrolysis circle of protease and its activity. The strain was identified by morphology observation, biochemical experiments, and 16S rRNA sequence analysis. The protease obtained from the strain was purified by a three-step process involving ammonium sulfate precipitation, carboxy methyl-cellulose (CM-52) cation-exchange chromatography, and DEAE-Sephadex A50 anion-exchange chromatography. The properties of protease were characterized as well. The strain Bacillus sp. QDV-3, which produced the highest activity of protease, was isolated. On the basis of the phenotypic and biochemical characterization and 16S rRNA gene-sequencing studies, the isolate was identified as follows: domain: Bacteria; phylum: Firmicutes; class: Bacilli; order: Bacillales; family: Bacillaceae; and genus: Bacillus. The isolate was shown to have a 99.2% similarity with Bacillus flexus. A high active protease designated as QDV-E, with a molecular weight of 61.6 kDa, was obtained. The enzyme was found to be active in the pH range of 9.0-9.5 and its optimum temperature was $40^{\circ}C$. The protease activity retained more than 96% at the temperature of $50^{\circ}C$ for 60 min. Phenylmethylsulfonyl fluoride (PMSF) inhibited the enzyme activity, thus confirming that this protease isolated from Bacillus sp. QDV-3 is an alkaline serine protease. Metal ions, $Mn^{2+}$ and $Mg^{2+}$, were determined to enhance the protease activity, whereas $Ba^{2+}$, $Zn^{2+}$, and $Cu^{2+}$ were found to inactivate the enzyme.

• Journal of the Korean Institute of Gas
• /
• v.22 no.1
• /
• pp.26-36
• /
• 2018

Conventional nickel-based catalyst processes used for dry reforming reactions have high activation temperatures and problems such as carbon deposition and metal sintering on the active sites of the catalyst surface. In this study, the characteristics of butane dry reforming reaction were investigated by using DBD plasma combined with catalytic process and compared with existing catalyst alone process. The physical and chemical properties of the catalysts were investigated using a surface area & pore size analyzer, XRD, SEM and TEM. Using $10%Ni/{\gamma}-Al_2O_3$ at $580^{\circ}C$, in the case of the catalyst+plasma process, the conversion of carbon dioxide and butane were improved by about 30% than catalyst alone process. When the catalyst+plasma process, the conversion of carbon dioxide and butane and the hydrogen production concentration are enhanced by the influence of various active species generated by the plasma. In addition, it was found that the particle size of the catalyst is decreased by the plasma in the reaction process, and the degree of dispersion of the catalyst is increased to improve the efficiency.